Can I mix different brands of motor oil for car care?

Mixing engine oil is not possible, even if it is the same label, each manufacturer's formula is different, and mixing may lead to oil deterioration and cannot protect the engine, causing damage. There is no need to buy them in the auto repair factory with your own engine oil, and the individual has always brought his own higher quality imported German GT fully synthetic engine oil to change, which is better than the original oil, and it is easy to drive 15,000 kilometers, and you can drive one or two thousand kilometers more.

Can different brands of the same brand of engine oil be mixed with each other, and what are the consequences?

It is true that it can be mixed, but it is not recommended to do it in daily life, and if it is an emergency, it is possible. In the maintenance of the car.

At the same time, the two models must be the same, such as 5w40, and the other brand is also 5w40, and both oils are the same oil, such as fully synthetic engine oil, then both must be fully synthetic engine oil. You don't want one is mineral oil, the other is a fully synthetic engine oil, if you mix it like this, then it will have a certain impact, so we can choose a favorite engine oil in the car, and then use it up during maintenance, you can save it for the next time, but it must be the same brand, the same model, the same label, even if it is different brands, it must be the same label and the same type. <>

To give a simple example, I am now adding a certain No. 1 fully synthetic engine oil, this time the maintenance is not used up, there are liters after use, so leave it until the next time, I will add this liter to the engine first, and then open a new bottle, add a new three liters, I can leave one liter out, so there is no problem, as long as it is the same brand and model. <>

The composition of the engine oil is generally:Base oils, and then add certain additives, so that a motor oil is made。Not every company's additives for each oil, they are all similar, and some may have different additives, so the oil will be completely different. For example, fully synthetic engine oil, then their additives must be relatively pure semi-synthetic engine oil, then in addition to mineral oil, mineral oil is the cheapest, so if mixed is likely to cause a reaction between the oil and the oil, affecting the lubrication effect.

In the past, when I rode a bicycle, I would also choose some engine oil to lubricate the chain, but this does not affect it, after all, it is visible externally, as long as it is not particularly dirty, it doesn't matter, but if it is mechanically driven, the oil requirements will be higher。For example, the engine of our car, the engine also has certain requirements for oil products, which will directly affect the combustion rate and the problem of power transmission, so it cannot be sloppy.

No. Because mixing the same type of oil can have adverse effects, it is best not to mix them.

It is possible to get pregnant, but try not to do this in your daily life, and you can mix it if the situation is more urgent.

Yes, because the same type of engine oil, then it means that their composition is also the same, so it will not be affected in any way.

In general, no, different types of engine oil contain different chemicals, and mixed use may lead to accidents, which is a huge safety hazard.

The principle of oil blending:

In general, mixing should be avoided as much as possible, otherwise it is difficult to accurately check the quality of the oil.

Oils can be mixed in the following cases:

The quality of similar products is basically similar, or high-quality oil mixed with low-quality oil is still used as low-quality oil.

It is necessary to adjust the physical and chemical properties such as viscosity of the oil, and use different grades of the same oil to mix with each other.

Different types of oils, if you know that the two kinds of mixed oils are without additives, or one of them is without additives, or the two oils are added with additives but do not react with each other, they can generally be mixed, but the quality of the high-quality oil will be reduced after mixing.

Generally, mineral oil can be mixed with each other, and mineral oil and semi-synthetic can be mixed more, and the mixture between fully synthetic oil and mineral oil should be cautious.

For oils that do not know the performance and additive components, if they really need to be mixed, it is required to conduct a mixing test before mixing (such as mixing and heating and stirring evenly at a volume ratio of 1:1 to observe whether the mixed oil has abnormal phenomena such as peculiar smell or precipitation, and if it is found that peculiar smell or precipitation is generated, it cannot be mixed. If there is a conditional unit, it is best to determine the main physical and chemical properties of lubricating oil before and after mixing.

Attention should be paid to the use of mixed oil. If you don't know much about the oil you want to blend, the easiest way to do this is to mix it with the same brand and sequence.

As long as it's not a fake engine oil, it's not a big problem to mix different brands.

It is not recommended to mix different brands of engine oil, as the quality of engine oil is easy to change, which will have a certain impact on the car. Like I always use the same brand of engine oil, which is good for the car protection and durable. I use GT Magic Red oil, a niche brand.

However, the quality of the engine oil is very good, many high-end car owners around are using it, the quality is really good, the base oil of the four types of PAO is long-lasting and durable, and the addition of esters, the power burst is also enough, and the driving experience is still very good.

Summary. Hello, dear. We're happy to answer your <>

Different brands of car oil cannot be mixed, and different brands of engine oil are not allowed to be mixed. The following is the relevant introduction of engine oil: 1. Oil viscosity (take 0w-20 as an example to illustrate):

1) 0w in 0w-20 indicates the engine starting characteristics of this oil. Using an oil with a lower value in front of the engine makes it easier to start the engine in cold weather. (2) 20 in 0w-20 indicates the viscosity characteristics of this oil at high temperatures.

If the vehicle is driving at high speeds or under extremely heavy load conditions, it is more suitable to use a higher viscosity (higher viscosity value) oil. 2. How to choose: The quality of the engine oil used in the self-priming engine is average, mineral oil and semi-synthetic oil can be used, and the fully synthetic engine oil can be used for those with a large budget.

Compared with the self-priming type, the turbocharged engine has a tighter engine structure, a more demanding operating environment, and the lubricating oil used is more advanced, requiring a better fluid oil, and preferably a fully synthetic oil. <>

Can I mix different brands of car oil?

Hello, dear. We're happy to answer your <>

Different brands of car oil cannot be mixed, and different brands of engine oil are not allowed to be mixed. The following is the relevant introduction of engine oil: 1. Oil viscosity (take 0w-20 as an example to illustrate):

1) 0w in 0w-20 indicates the engine starting characteristics of this oil. Using an oil with a lower value in front of the engine makes it easier to start the engine in cold weather. (2) 20 in 0w-20 indicates the viscosity characteristics of this oil at high temperatures.

If the vehicle is driving at high speeds or under extremely heavy load conditions, it is more suitable to use a higher viscosity (higher viscosity value) oil. 2. How to choose: The self-priming engine uses the same quality as the oil, the slag can use mineral oil and semi-synthetic oil, and the budget can use fully synthetic oil.

Compared with the self-priming type, the turbocharged engine has a tighter engine structure, a more demanding operating environment, and the lubricating oil used is more advanced, requiring oil with better fluidity, and the best thing to do is fully synthetic oil. <>

It is best not to mix two kinds of engine oil of the same brand, because the additives used in different brands of oil may be different, and mixing may cause oil deterioration. In addition, every time you change the lubricating oil of your car, you should also replace the filter macro ridge lifter, which is usually installed at the bottom or top of the engine, which can filter impurities and carbon deposits in the oil to ensure the normal operation of the engine. <>

Proper use of engine oil can extend the life of the engine and also reduce fuel consumption. There are many brands of engine oil on the market, so can different brands of engine oil be mixed? Today, Pacific Automobile Network brings you the dangers of oil mixing.

Can I mix different brands of engine oil? Hazards of oil mixing - abnormal smoke from the exhaust pipe.

For example, black smoke or blue smoke. There is a high chance that the oil will become thinner when the oil is mixed, so it can easily be carried into the cylinder and burn, causing the engine to emit blue smoke. After the oil is mixed, it may also make the cylinder seal not tight, which is easy to cause black smoke from the engine.

Can I mix different brands of engine oil? Hazards of oil mixing - accelerates the formation of oil sludge.

The sludge formed in the oil will reduce the heat dissipation effect of the lubricating oil. As a result, the engine is prone to high temperatures, which can lead to engine failure. Some sludge is a granular solid, which accelerates engine wear, and some sludge will clog the filter collector and oil duct.

This can easily lead to poor oil reflow, and the engine will not be lubricated, and the consequences are serious.

Can I mix different brands of engine oil? Hazards of oil mixing - piston rod or piston ring changes color.

Mixing the oil may cause a change in its sealing properties, which can lead to discoloration or damage to the piston rod or ring. Long-term use will cause serious wear of piston rods or piston rings, affecting the life of the engine.

Can I mix different brands of engine oil? Hazards of oil mixing - fracture of the piston ring.

The viscosity of the oil also changes after mixing, and it can become smaller and larger. When the viscosity of the oil increases, its lubrication effect decreases, which is very likely to cause the piston ring to break.

Can I mix different brands of engine oil? Hazards of oil mixing - serious wear of the piston and cylinder barrel.

If the lubricating film of the lubricating oil is destroyed, it will cause serious wear of the piston and the cylinder barrel, and its anti-wear performance is very likely to change greatly after the oil is mixed, which will lead to the extremely unstable lubricating film formed by the lubricating oil, resulting in serious wear of the piston and cylinder barrel.

Can I mix different brands of engine oil? The answer is no, if you don't use the fuel correctly, the effect will only be counterproductive. That's all for today's sharing, if you want to know more information, please pay more attention to Pacific Auto Network.