The height of the wire zygote installation for the sensor basin

1. Confirm the installation location of the washbasin: before paving the floor tiles and wall tiles, it is necessary to confirm the installation position of the washbasin, because the installation of the bathroom cabinet is to punch holes in the wall, and the water inlet holes and drainage holes are also needed. Second, when buying a bathroom cabinet, confirm the shape and size of the bathroom cabinet according to the installation location

After the location of the bathroom cabinet is determined, the shape and size of the bathroom cabinet can only be determined according to the installation position. 3. Look for the pipeline diagram of the water pipe and the wiring diagram of the wire: when installing, you should use an air drill to punch holes in the wall, so it is very important to confirm the pipeline diagram and the wiring diagram before installation.

4. Confirm the installation height of the bathroom cabinet: the standard installation height of the general bathroom cabinet is 80 85cm, which is calculated from the floor tile to the upper part of the wash basin, and the specific installation height should be determined according to the height and usage habits of family members, but it is the most suitable within the standard height range.

The height of the upper edge of the basin is about 850, and it cannot exceed 900, otherwise it is not suitable for ergonomics, of course, you are above 185, it is recommended that you install 900, but it is generally 850

What is the height of the washbasin in the bathroom: When installing, keep the height of the sink or countertop from the ground between 80 and 85 cm.

Although the problem of the height of the washbasin is not very noticeable, it is a problem that cannot be ignored, the washbasin is installed too high, it is inconvenient to use, and if it is too low, it is easy to make people stand on the backache, and it will splash around.

Especially when hanging the wall-mounted washbasin, users must pay attention to the height of the washbasin, in general, the owner has no special requirements for the height of the washbasin, so the installation should keep the height of the pool or countertop from the ground between 80 - 85 cm.

Some users because of the height, the conventional washbasin height is not suitable for their use, it is necessary to make appropriate adjustments to the washbasin height, in this case, the bathroom washbasin height only needs to pay attention to a principle: the height of the bathroom washbasin is kept at about half of the user's height is more appropriate, such a height is also very comfortable for users to use.

Commonly used washbasin sizes are: 585 390mm, 600 460mm, 700 460mm, 750 460mm, 800 460mm, 900 460mm, 1000 460mm, 600 405 155mm, 410 310 140mm and other sizes, in addition, there are many commonly used washbasin sizes, because washbasin is a private bathroom sanitary ware supplies, so in order to try to meet the needs of every user, Manufacturers had no choice but to launch many washbasins of different sizes, and finally the current situation appeared.

The height of the basin is 780mm, the marble water retaining and baseboard are about the same, the mirror is generally higher than the basin 200mm, the specific size depends on the size of the mirror on the spot, and the general ** division point is about 1500mm.

Sanitary ware installation, if there is no special design department, drawings are required!

The installation height of the countertop basin is generally 750mm to 800mm, and the height of the countertop water retaining strip is 50mm. First burn the frame with angle steel, then lay the marble countertop, then open the water hole to put the basin, and then glue it to fix! ok~~~

Such a simple thing still needs drawings?? The most earthy way to install it above and below your belly button will do the trick.

Generally, it is about 80---90 cm, which is more suitable for a family.

Is it installed in the bathroom?

It is adjusted according to the height of the owner, from the ground to the upper edge of the basin about 80cm to 85cm.

Bathroom standard size analysis: according to the installation method, the bathroom cabinet is divided into wall-mounted bathroom cabinet and floor-standing bathroom cabinet, and the floor-standing bathroom cabinet mirror needs to be installed.

1.45 meters, this also depends on the height of your family.

It's a good idea that when you wash your face, the water doesn't run down your sleeve

I have two countertop basins: one countertop basin is 13cm high and low, and the cabinet is 75cm high; A countertop basin with a 20 cm high and low surface cabinet is 70 cm high. The height of the application is very suitable. I hope it helps.

The installation height of the countertop basin. It is recommended that you do it at about 1.2 meters.

It is usually at the level of the belly button of an adult.