What should I do if the rubber head of the car wiper falls off? Can you change it yourself?

Car wiper rubber strip maintenance method:

1.Pull up the wiper, touch it with your fingers on the cleaned wiper rubber, check whether there is damage and the elasticity of the rubber blade, if the blade is aging, hardening, cracked, it needs to be replaced;

2.When it rains lightly, it is found that the wipers leave uneven wiping marks on the glass surface, affecting the vision, which indicates that the wipers have hardened and need to be replaced;

3.When the tension of the wiper arm spring becomes weaker, the wiper arm needs to be replaced.

It can be seen that the small wiper is also very particular about warranty and maintenance.

The maintenance of the wiper cannot be neglected.

When the rain obscures your vision, if you don't have a pair of dutiful wipers to wipe away the pesky rain, you can imagine the consequences. And at this time, you realize that you have a "healthy" pair of wipers, I am afraid that it is too late. In order to thoroughly ensure driving safety, you can't be lazy in the maintenance of windshield wipers.

Wash the wipers properly: especially the grains of sand, which are the main culprits of wiper wear. If you don't pay attention to cleaning, it will cause aggravated wear and tear of the wipers.

Try to avoid high temperature exposure: The strong heat of summer will test the rubber material of the wipers, which can cause deformation or loss of elasticity in the long run.

Say goodbye to ammonia-containing detergents: The so-called ammonia-containing detergents are general household laundry soaps or other household cleaning products, which are the killers of rubber strip hardening, so it is recommended that car owners choose special detergents for their cars.

You can change it yourself, and it will cost you about 30 to buy a pair of boneless wipers.

Changing the wiper is changing the rubber strip.

Under normal circumstances, the wiper rubber is replaced once every six months or a year, but the specific use of the wiper should be combined. If you do not change the wiper strip for a long time, the wiper strip will slowly affect the skeleton of the wiper after aging, and the skeleton will age, so in order to reduce the impact on the skeleton of the wiper, it is necessary to replace the wiper strip on time and in time.

If the wiper is the original car, and the skeleton of the wiper is intact, it is recommended to only replace the wiper strip, because the wiper of the original car is of better quality and very strong, and it will be cheaper to change the strip alone.

Precautions for changing wipers:

As a wearing part, under normal circumstances, the wiper blade needs to be replaced when it is used for 1 or 2 years, but it is not immutable and should be replaced according to the actual situation. If there is an abnormal sound when the wiper blade is working, or there are cracks and aging on the surface, resulting in the wiper not being clean, it should be replaced in time.

In rainy areas such as the south, wipers are used frequently, which can appropriately shorten the replacement cycle. Tap water cannot be used instead of glass water unless it is a special case; The wiper should be used in conjunction with the glass water to avoid dry friction between the wiper and the windshield.

If there is hard dirt on the glass, it should be cleaned by hand to avoid damaging the wiper blades and glass; When the vehicle is parked outdoors in the sun or in snow, the wiper should be erected, which can relatively prolong the service life of the wiper blade.

What to do if the wiper rubber falls off What to do if the wiper rubber falls off The wiper rubber strip should be replaced with a new one, and you should pay attention to the maintenance of the wiper at ordinary times, the methods are as follows: 1. Don't forget the wiper when washing the car, in addition to cleaning the glass window every time you wash the car, it is best to wipe the wiper strip with glass cleaning liquid, so that the life of the wiper strip will be longer; 2. Check regularly, the way to check the wiper is very simple, spray out some cleaning liquid, and then start the wiper, pay attention to whether its action is smooth; 3. Pay more attention when using the car, if you want the wiper to have a longer service life, it is best to avoid exposure to the sun for a long time. @2019

The wipers are not very easy to use after a long time, and the glass is one by one after brushing, especially when driving at night, the lights are so light that you can't see anything. Just grind the rubber strip with water sandpaper, but I found that after grinding, it is better not to grind, and it will not be clean at all. Then to solve it completely, you can only replace the wiper strip.

Under the tool raw wiper rubber strip steps method original car wiper and new buy rubber strip.

Remove the caps on both sides of the wipers.

Remove the old wiper strip, thread the new strip along the two steel plates, and restore the cap.

In the same way, the old wiper strip is removed, the new strip is threaded along the two steel plates, and the cap is restored.

Precautions 1, boneless wiper steel sheet: the two steel sheets in the wiper should not be too strong during the replacement process, or the steel sheet will not be clean after deformation. Unless you adjust it slowly.

2. Caps at both ends of the wipers: The caps at both ends of the original wipers are very tight, and they are not pried off with scissors.

Hope it helps!

The rubber strip of the wiper is rarely replaced separately, and it is generally replaced as a whole, and it is not expensive.

Strip change. The wiper skeleton of the original car is very strong, and even if the quality of the wiper skeleton is good, it is not as good as the skeleton of the original car. If you don't replace all the wipers when you change the wipers, you only need to replace the rubber strips inside, and the effect is the same as changing the entire wiper.

Car wiper replacement precautions:

1. Do not dry scrape, the wiper is used to scrape the rainwater on the front shield, no rain is basically not used, and it must not be dry scraped without water. Due to the increase in frictional resistance of waterless dry wipers, it can cause damage to the wiper strip and wiper motor.

2. Dried bird droppingsIf there are solid things on the windshield, such as dried bird droppings, you can not directly use the windshield wiper to dry brush, you can clean it up by hand. These sturdy things can easily cause local injuries to the thin sheets of the wiper strip, resulting in unclean wipers.