What to do if the glass glue is moldy Teach you to solve it by yourself

I don't know if you have encountered such a situation, such as the cabinet countertop for a long time, the glass glue at the corner of the shade shows signs of mold, a little black spot is very troublesome, and the general wipe can not be treated, today I will briefly share with you how to deal with it more beautifully.

Solutions for moldy and mildew of glass glue:

1. If the mildew area on the glass glue is not large, you can use a toothbrush to dip the toilet cleaner to brush and clean.

2. Or use a cloth strip dipped in 84 disinfectant, apply it to the glass glue, remove it after a night, and clean it.

3. If the mildew range is large, it is necessary to shovel off all the glass glue and re-glue. The method of making glass glue is very simple and can be operated by yourself. First of all, remove the original glass glue and keep the glue position dry.

Attach masking paper to the edges to prevent the glass glue from spilling elsewhere. Then glue the construction site, smooth the surface with a scraper, tear off the masking paper, wait for 12 hours, and the glass glue can be used when it is dry.

4. Clean the mold on the glass glue, use antifungal agent, and apply it on it with a brush, which can play a certain role in preventing mildew.

1. Toilet cleaner First of all, we can use the more commonly used toilet cleaner, which can effectively remove stains. Therefore, you may wish to spray a little toilet cleaner on top of the glass glue, and then use a brush to brush and scrape on the glass glue. Ordinary smudges can be removed.

If the stain is too difficult to deal with, we can scrape the glass glue with a knife. This glass glue can usually be scooped up by a knife. However, you still have to be careful when scraping, after all, the knife is relatively sharp, and it is easy to hurt yourself if you are not careful.

The glass glue on the toilet bowl will have more bacteria and is very dirty. At this time, it is best to clean the surface with toilet cleaner, and then scrape it off with a knife, so that it will be cleaner Disinfectant 84 disinfectant can quickly remove the black mold on the surface of the glass glue, the method is to fill a towel with 84 disinfectant, put it on the glass glue that needs to be removed, take it away in about 1 minute, wipe the surface of the glass glue with a towel, and the mold will basically be removed by the 84 disinfectant. 3. Anti-mildew glass glue: In order to prevent the glass glue from mildew, you can choose a more popular glass glue to prevent mildew, and we are applying the glass glue to us.

Scrubbing, this is very simple is to use the cloth dipped in 84 to scrub this part of the glass glue part, the main thing is to use 84 to play a role in decolorization, but the smell is relatively large, and it is more difficult to dissipate, so it is still necessary to be cautious in the kitchen, and another point is that after the glass glue contacts 84, the yellow may be more serious, and the mildew will become lighter, but the glass glue is also more likely to change color.

2. Mildew removal ointment, this we buy directly and use it directly, the method is very simple, as long as you squeeze it to the place where there are mildew spots on the glass glue, you can dissolve the mildew spots after a period of time, not only this place can be used, the rubber pad part of the toilet, and then the floor gap, this mildew can be cleaned off by using mildew removal paste, which is very convenient and very simple.

3. Re-gluing, if the above two methods do not play any substantial role, for example, the mildew point is deep, and the glass glue has also been used for a period of time, then it is recommended to tear off the original glass glue, and then squeeze on the new glue, the method is to use a sharper knife to shovel off the original glass glue, and then fix the sink, squeeze on the new glue, at the beginning squeeze may be soft, so do not touch. However, this squeezing glue has a certain technicality, if you don't understand and have no experience, in fact, it is not recommended that you operate it yourself, because it is easy to stick badly and then leak, but it is more troublesome, of course, after the leakage, you can also try to find out the water point and refill the glue.

1. Shovel off the moldy and blackened glass glue and re-apply the new glass glue. This is the easiest way, but it can't solve the problem fundamentally, and it will still be moldy after a long time.

2. Use bleach, bleach has the effect of sterilization, dip the brush in the bleach, and then brush the moldy glass glue, which can effectively remove the mold.

3. Attention needs to be paid to the selection of bleach, the concentration should not be too high, otherwise people will damage the best tissues of the human body when they encounter it, and it will also cause great damage to the glass glue.

You can use mold removal gel, nail polish remover, alcohol, 84 disinfectant, etc. to clean off mold and mildew on the glass glue. First wipe the moisture and dust on the glass glue, then apply the gel, and wipe the gel with a paper towel or towel after a few hours, which can generally remove the mold and mildew in the banquet shed. If you want to know more about "what to do if the washstand glass glue is black and moldy", you can read on.

1. If the mold and mildew are more serious, then you need to let it stand for a long time before wiping off the gel, if it is still not removed, reuse.

2. Spray alcohol, nail polish remover, 84 disinfectant, etc. directly on the moldy and blackened glass glue, let it stand for a period of time and then brush it with water, and generally remove the mold and mildew.

3. If you use mold removal gel, it is best to wipe off the moisture and dirt on the glass glue before using the pane pants, so that the effect is better, you can use it at night before going to bed, and you can wipe the gel clean the next morning.

4. If the mildew and blackening are very serious, it is recommended to remove the glass glue and recoat it, and you can scrape off the glass glue with a knife.

<> because the handwashing station is relatively moist and there is basically moisture all year round, the glass glue will become moldy, so it is recommended to wipe the water on the handwashing station dry after each wash, so as to effectively prevent mildew and blackening.