How to connect an ASUS laptop to a Sony LCD TV

Updated on technology 2024-03-12
12 answers
  1. Anonymous users2024-02-06

    You can use a VGA cable, or you can use an HDMI cable if you have an HDMI interface. Use FN+F8 or Windows +P to toggle the display. Thank you.

  2. Anonymous users2024-02-05

    The problem description is not very clear, and there is no supplementary explanation, specific through what kind of connection method, is it VGA, or HDMI, if there is a corresponding screenshot, it is recommended to upload it together, and then supplement the specific description of the situation, so as to give targeted instructions or introduction.

  3. Anonymous users2024-02-04

    If your laptop and TV have HDMI or VGA ports:

    1: One HDMI cable or VGA cable;

    2: Turn off the laptop and TV, and connect the laptop to the LCD TV with an HDMI cable or VGA cable.

    3: Restart the laptop, turn on the LCD TV, and adjust the information source of the LCD TV to HDMI mode or VGA mode.

    4: Right-click on the desktop of the laptop to open the ATI3C control panel. Graphics Cards - Desktop & Monitor, go to Desktop & Monitor settings.

    5: Click "Detect Display", you will see two monitors, one is a notebook and the other is an LCD TV.

    6: Click the black triangle in the upper right corner of the TV icon to see the following settings. If you select Extension, replication is displayed. Select the copy mode so that both the laptop and the TV screen will display the desktop.

    7: Go back to the desktop, right-click, and enter the desktop resolution setting panel. Select the LCD TV in the monitor and tick "Make it my primary monitor".

    8: If you select "Show desktop only on 2" in the "Multi-monitor bar", you can only see the desktop on the TV, and the laptop's display is in a black screen.

  4. Anonymous users2024-02-03

    It depends on what interface your TV has,If there is an HDMI interface, then you don't need to distinguish the audio**,One line will do it。 But if you only have a VGA or S terminal, then you will definitely have to get an audio cable from the headset connector of your laptop to the audio port of your TV. Whether it's a VGA or an S terminal, you only need to connect the corresponding cable to the TV.

    And how to display it to TV, I'm sure you will too. Or search for it on the Internet, a lot. The corresponding line computer city has some for sale.

    Of course, you can listen to the sound of the laptop in the same way, so you don't have to worry about the audio cable.

  5. Anonymous users2024-02-02

    How to connect your ASUS computer to a Samsung LCD TV:

    1. First of all, prepare a VGA cable, which can be used to synchronize the screen display on the computer to the TV.

    2. Find the VGA socket on the computer and connect one end of the VGA cable to the VGA socket on the computer.

    3. Find the VGA socket on the TV and connect the other end of the VGA cable to the TV.

    4. Turn on the TV and press the "Source" button on the TV remote control.

    6. After the TV is switched to VGA mode, it can be connected to the computer and display the computer screen synchronously; Indicates that the computer and TV have been successfully connected.

    In order to get a better display effect, it is recommended to adjust the resolution of the computer according to the size of the TV, generally 32-inch TV can adjust the computer resolution to 1280x720 pixels or 1366x768 pixels.

  6. Anonymous users2024-02-01

    1. The length of the cable is not more than six meters (there will be loss when the signal transmission exceeds six meters) 2. After connecting the wire, enter the computer signal source of the TV.

    3. Set the resolution and refresh rate of the computer, this should refer to your manual to select the second monitor when setting, and then there is an item below that is"Extend the Windows desktop to the monitor" to remove the hook in front, do not choose, and then set the resolution and refresh rate.

    4. The computer screen cutting operation is generally fn+f* (different brands, the keys are different, and a monitor is drawn on it).

  7. Anonymous users2024-01-31

    Optionally, extend windos to a second display.

  8. Anonymous users2024-01-30

    Check the manual of your TV,It's really not good to play TV's customer service,This has a certain setting and order。

  9. Anonymous users2024-01-29

    It's not good, when it's a monitor, you have to play games at the very least, but Sony's response speed is not good, it's choking.

  10. Anonymous users2024-01-28

    I'm Lenovo Y460N and Sharp's 39GE5A connection,Use HDMI cable,You can connect it,Sony LCD should also have HDMI interface,Connect to the HDMI interface on the notebook,

  11. Anonymous users2024-01-27

    Select the appropriate data cable to connect the notebook and the TV, select the corresponding input interface for the TV, and use the shortcut key win+p to switch modes for the notebook.

  12. Anonymous users2024-01-26

    Use a signal cable to link the laptop to the TV, and switch the laptop to an external monitor while you are using it.

Related questions
22 answers2024-03-12

There are two common methods of U disk installation and hard disk installation. >>>More

27 answers2024-03-12

Dear ASUS users, Hello!

Based on your description, the following suggestions are for your reference: >>>More

4 answers2024-03-12

Hello, method.

Subtitle programming number solution: press the fn (in the lower left corner of the notebook keyboard, which line is the bottom) plus numlk (the penultimate row on the notebook keyboard) key to intelligently switch to the small numeric keypad. Very few keyboard keys are not in the same position, but they are easy to find. >>>More

19 answers2024-03-12

Such a difficult question? It would be nice to buy another TV that can be plugged into.

11 answers2024-03-12

Go to the computer store and buy a conversion interface and it's OK!