Tips for opening beverage bottle caps, how to open soda bottle caps?

Cap-to-cap opening method:

Put the opened soda bottle on the table, the other bottle mouth is facing down, the two bottle caps bite each other, the thumb and index finger of the left hand are clasped under the bottle cap, the thumb joint arches with small force, and the right hand is forced to mention it quickly, which is actually a kind of ingenuity.

How to turn on the accessibility tool:

You can also use some auxiliary tools such as lighters and chopsticks to open the soda bottle, and the specific method and bottle cap are used on the bottle cap with a principle, physical leverage, find a fulcrum, and skid up the bottle cap. Be careful with this method and pay attention to safety.

How to bite your teeth:

Just bite it with your teeth. This method is also very dangerous and should be used with caution.

After injuring the enamel, the teeth have no protective barrier, and they are prone to hidden cracks, which is even worse.

In fact, the beverage bottle cap is generally not very close, the reason why it is not easy to open is that the strength of pinching the cap is not enough, but the bottle itself is not strong enough, if you want to easily unscrew the cap, you can put a piece of cloth on the cap, which helps to increase the friction between the hand and the cap, and at the same time pinch the cap and unscrew it.

Look at the skills of beverage bottle caps, each beverage bottle cap may be different, there is a collar and a direct prie, if you open it skillfully, it will be very simple to use the skill of the lever principle, if you open the zipper, you need a little more strength, or use a handkerchief to cushion it.

Open the cap of the bottle to turn the bottle upside down, then pat his bottom, and then twist it again to open it easily.

What other techniques do you use to open the cap? He's plastic, you twist it with your hand and it comes out, if you can't twist it with your hand, you can put a towel on it.

The easiest way to open the cap is to take a lighter and bake it near the lid.

This can be the skill of the drink bottle cap, this drink bottle is generally very easy to open, the hand strength is a little bigger, and it will be opened with a twist.

There is no skill, just unscrew it with a little more force along the line.

Hold the drink smoothly, then hold the cap with your right hand and rotate it.

Technique This is to twist it with strength, and you can't say slow time with an inch.

A drink bottle also needs to study the skills, which shows that your mind is still relatively delicate, but I don't think any skill can be compared, and it is inconvenient to unscrew it directly by hand, right?

Hello friend, turn on the volume and blocking skills, if the volume and the screen are difficult to open, you can turn the screen over and shoot a few times, his feeling will look good.

There is no skill in opening the cap of the drink bottle, and if you can't open it yourself, you can show it to others.

The way to open the cap of the marble soda bottle is to remove the retaining ring first, then open the T-cap and drink it with a straw.

Here's how:

1. Slowly remove the plastic sticker and fixing ring on the bottle mouth.

2. After removing the plastic sticker, take out the T-shaped cap, aim the glass beads at the bottle mouth, and gently press the bottle mouth cap to make the glass marbles fall. In order to make the carbon dioxide gas in the bottle stable and not sprayed, you should immediately press and hold the push cap for 5 6 seconds, and then release it after the gas in the bottle is stable.

3. Do not unscrew the blue cap, once unscrewed, the beads may fall out of the bottle, so as not to fall out when drinking, causing danger.

4. Don't lift it too high when drinking, so that the beads will block the bottle mouth and the drink won't come out. It's best to insert a straw, which is both convenient and aesthetically pleasing.

Precautions: Do not shake the bottle when opening the cap, and do not unscrew the blue cap to avoid the beads falling off, and it is dangerous for children to take it by mistake.

Soda bottle caps? Metallic? Or plastic? Isn't it okay to use a bottle driver for metal and unscrew it for plastic by hand?

1. Scissors method

The easiest way to do this is to hit them with a pair of firm scissors and gently place them under the cap, parallel to the folds (scissors facing the bottle). Start with a small fold and continue to cut in a circular circle until the cap can be removed.

2. Soup spoon method.

With a spoon, the bigger the better, put the small end of the spoon under the cap, put your hand on the neck of the bottle, and suddenly exert force. It's like using a lighter, but it's much simpler and much faster.

3. Forks. Using a regular fork is a quick and easy way to use one of the fork's teeth as a lever to push the thin groove of the cap up and keep it away from the cap, one groove at a time.

4. Car seat belts.

The latches of car seat belts also have a shape that fits the opening of bottles.

5. a hammer. The hammer can also be used to open the bottle by turning the hammer upside down, prying the fork end at the edge of the cap, and then circumnavigating the cap in this way. If you know how to use a hammer, it's easy and safe.

In daily life, many people like to order an extra soda-type drink when eating in a street shop, and the soda in these stores is not like the plastic bottles in the supermarket, most of them are packed in glass bottles similar to wine bottles, so what is the method and skill of opening the beverage bottle cap?

1. Spoon: The bottle cap can also be opened with a spoon, the bigger and harder the better, the spoon tip is aimed at the bottom of the bottle cap, hold the bottle mouth tightly with the other hand, pry it upwards vigorously, and slowly apply force to open the bottle cap.

2. Scissors: The cap can also be opened with scissors. Use a pair of steel scissors that are strong enough, keep a parallel and slightly biased posture, hold the scissors steadily, aim at the small bulge of the bottle cap to cut, slowly turn the circle to cut, and the third push of the scissors can push the cap away.

3. Fork: It is also very easy to open the cap with a fork. Place the tines against the cap grooves and pry them upwards one by one. The cap can be easily opened.

In fact, if you don't have a bottle opener, you can use the spoon, scissors, and fork on the dining table to open the cap.

To open the cap of a can, you need to prepare: a bowl of warm water and a towel.

1. First pour an appropriate amount of warm water into a small bowl and set aside, as shown in the figure below.

2. Next, take out the canned food and place the canned food upside down in warm water as shown in the figure below.

3. Take out the can after a few minutes, and use a rag to wipe the water on the can dry, as shown in the figure below.

4. Next, unscrew the lid of the can counterclockwise as shown in the figure below.

1.Hit the bottom of the glass bottle with your hands, or warm the bottle; 2.Pry the cap with a spoon upwards, hear the sound of deflation, and it is very easy to open it again; 3.

In the balcony windowsill or where there is cement on the ground, (it can also be a hard substance such as marble, but it is required to be flat) put the can head down, hold the bottle in your hand, in an inclined shape, and knock the edge of the can lid the cement or marble slab, just to flatten the edge, and then you can see that air enters the bottle, and when there are bubbles, you can unscrew the cap a little harder.

Here's how:

1. Turn the bottled can upside down, and gently hit the bottom of the bottle with a fist to destroy its vacuum, and it will be easy to unscrew it. (If it doesn't work once, you can repeat the operation).

2. If there is boiling water, you can pour some boiling water on the cap of the bottle, and it will be unscrewed quickly.

3. If you have a small spoon at hand, you can use the spoon handle to gently pry the cap of the bottle, and when you hear the sound of running gas, you can easily unscrew the cap.

4. When there is no hot boiling water and a small spoon, you can also use the flame of a lighter to burn it along the cap, and it will be easy to unscrew it.

Snap the cap onto the kitchen countertop (or whatever smooth countertop) and hold the bottle in your hand and pull it down until you hear a pop and easily unscrew it.

Canned caps are too tight to open? Learn this trick and never rely on brute force again.

Pat the bottom of the bottle with the palm of your hand, remember that it's a glass bottle! I'm not sure? I'm looking at other people. Ha ha?!

I've been single for a long time, and I tried unscrewing it with my bare hands.

Spice bottles in the kitchen, beverage bottles in the refrigerator, pickle bottles on the dining table, many times we will be troubled by not being able to open the bottle cap, the following three tricks let you skillfully unscrew the bottle cap.

Capper. Method: Select the appropriate type of capper according to the size of the cap, and put the serrated part on the cap. Just turn it by hand.

Note: With this gadget, the cap is easier to open because the rubber increases friction. In the same way, if the rubber gloves used to wash dishes at home are used to open the bottle after wearing, they are just as easy to use.

Soak in hot water. If you come across a bottle that is difficult to pry with a spoon, try pouring boiling water into a bowl, soaking the top of the bottle for a few seconds, and then twisting it open. Usually, the bottle is easy to open after the principle of heat expansion.

Pry the cap with a spoon.

Principle: Some large spice bottles are not easy to open even with a bottle opener, which requires a little external force.

Method: Use a stainless steel spoon to pry the edge of the cap, and when you pry it open, gas will enter and the bottle can be opened easily.

The tips for opening the cap are as follows:

If you have two beers, you can put one of them on the table and use the beer cap of the other bottle to jam on top of the first bottle; Hold the two bottle pie skins and open them with a slight knock down, faster than the corkscrew and effortlessly.

When you accidentally break the can tab, it's very simple, we just need to prepare a chopstick. There is a small groove on the side of the big end of the pull ring, and the end of the chopsticks is aimed at this interface, and it will explode after rubbing it left and right a few times in this position.

If you come across a can that is particularly difficult to open, you can also use the principle of thermal expansion and cold contraction to prepare a bowl first and then pour hot water. Then put the can upside down in the wild envy book, let the hot water cover the can, and soak for 30 seconds. When the time is up, take out the can, twist it slightly, and it will be opened.

Another benefit of this method is that no matter how big the bottle is, it can be easily opened as long as you soak it in hot water with your head down.

Bottle caps

The bottle cap is used to seal the bottle, according to different functions, there are different shapes, different operation methods of the bottle cap, such as the mineral water bottle cap is round with a screw, the canned bottle cap is ring-shaped with a pull, the meat canned bottle cap has no fixed shape, tear into what is what it is, the cap of the injection bottle is glass integrated, to use a grinding wheel around the grinding wheel to polish it and then use a pop open; Men's favorite beer bottles have caps that are made with prie.

There are three ways to unscrew the cap of a large drink bottle:

1. Use the capper, select the appropriate type of capper according to the size of the cap, put the serrated part on the cap, and turn it by hand. Capping devices are available in major shopping malls and department stores**;

2. Use a stainless steel spoon to pry the edge of the cap, and when you pry open some rough gaps, gas will enter, and you can easily open the Yanshou bottle;

3. Soak in hot water, put the bottle mouth into hot water and soak for a few seconds, and then twist the cap. Usually, the bottle is heated and will be easily opened.