-
1. If the system fails, use iTunes to restore the system.
2. Install iTunes on your computer. Launch iTunes.
3. Connect your iPhone with a data point, press and hold Power (power button) and Home (the circle button below) for 10 seconds, wait for the iPhone to go black (according to experience, probably after a second after the black screen), release the Power button, and keep holding it.
Until iTunes recognizes the iPhone.
4. At this time, Windows will first discover some new hardware and drive it by itself, and a prompt box will pop up after iTunes automatically recognizes the iPhone. "iTunes has detected an iPhone stuck in recovery mode, you have to restore this iPhone and then use it with iTunes. "At this point, click OK.
5. Open iTunes, on the cross-section that displays the iPhone capacity and information, click Restore to start the recovery process.
6. Until a data cable connection screen is displayed on your iPhone, iTunes prompts that the firmware restoration is complete.
-
The black screen and the inability to turn on after charging are the driving reasons.
The solution to the black screen won't turn on after Apple charging is as follows:
1. You can try to press and hold the power of your phone and the home button on the home screen at the same time for more than 10 seconds. (as shown in the image below).
2. Connect the charging cable, wait for the icon to appear, and press and hold the power button. What's going on with the black screen of the Apple phone:
1. It may be caused by internal conflicts in the software you have installed. In serious cases, the screen will restart and so on.
2. It may be that the mobile phone has been used for a long time and the heat is not dissipated in time.
3. Enter Apple's DFU mode (i.e., recovery mode), resulting in a black screen that cannot be turned on.
4. The battery is aging or damaged, resulting in insufficient power or inability to charge.
5. Other parts of the phone are malfunctioning, such as the display screen or power button. Wait.
6. Problems with the mobile phone system or application software, resulting in the mobile phone not operating normally.
7. If the power management function of the volt key of the Apple mobile phone is not set correctly, it may cause a black screen, so reset the power management function. <>
-
Hello, I am glad to serve you and give you the following answers: If the iPhone does not turn on the silver chain ridge and the black screen charging does not respond, it may be due to the failure of the iPhone's hardware, or due to the problem of the iPhone's software. First of all, you can try to restart the iPhone, press and hold the volume up button and the main button of the iPhone at the same time, until the iPhone screen appears Apple logo, if the iPhone can start normally, it means that there is a problem with the iPhone software, you can try to reinstall the system, or restore the settings of Hengzhao Banquet Factory.
If your iPhone still won't turn on, it may be that your iPhone's hardware is faulty, at this point you can try to replace your iPhone's battery, or send your iPhone to a professional repair shop for testing and repair.
-
Hello, it is a pleasure to serve you and give you the following answers:1Reason:
When the Apple phone is charging, the screen suddenly goes black and it can't turn on, which may be due to low battery power, or due to battery damage or battery overheating. 2.Workaround:
1) Check the battery fiber distribution level: unplug the power cord, press and hold the power button, if the phone can turn on normally, it means that the battery is insufficient, you can try to charge it; (2) Check whether the battery is damaged: If the phone cannot be turned on, you can try to replace the battery; (3) Check whether the battery is overheated:
If your phone won't turn on, you can try putting it in a cool place and waiting for a while before trying to turn it on. 3.Personal Tips:
1) Try to avoid using the phone while charging, so as not to cause the battery to overheat; (2) Check the battery level of the mobile phone regularly to avoid low battery power; (3) Regularly check whether the mobile phone battery is damaged, so as not to affect the use of the mobile phone.
-
Hello, I am glad to serve you and give you the following answer: the black screen of the Apple phone cannot be turned on, which may be caused by the low battery or system failure. Workaround:
1.Plug your phone into the charger, charge it, and wait a while to see if it turns on normally. 2.
If charging doesn't solve the problem, you can try to restart the phone, press and hold the volume plus power button on the phone at the same time until the Apple logo appears, and the reboot will be successful. 3.If none of the above methods can solve the problem, you can try to restore the factory settings, press and hold the volume plus power button on the phone at the same time, or until the Apple logo appears, enter the recovery mode, and follow the prompts.
Personal tips: Apple mobile phone black screen can not turn on, the best solution is charging, if charging can not solve the problem, you can try to restart or restore the factory settings, the above methods can not be solved, you can try to consult Apple customer service, or go to Apple's official authorized repair shop for repair.
Ringing at startup: Constant ringing (long sound): The memory module is not plugged in tightly or damaged. Reinsert the memory module, or replace the memory. >>>More
Try to reinstall the system, if it doesn't work, it's a problem with the power supply.
1. If you press the power button of the host and the power light does not light up, check the output power of the power adapter first, and try to replace the power adapter. 2. If the power light is on after replacing the power adapter, but it still can't start, press the num lock key, the num lock light will not turn on, so the motherboard generally can't start normally. Please shut it down, take out the memory, clean the memory gold finger, and then plug it back in. >>>More
Hi, you tried to uninstall yy and reinstall it.
Your memory is only 512, and it's normal to have half of it left after entering the XP system. >>>More