Hand made woolen shoes to collect needles, all the tutorial methods of knitting shoes

Tools Raw materials: wool thread, wool needle.

1. Prepare the yarn and knitting needle. Take 6 stitches to do a knitting demonstration, as shown in the figure below.

2. Start knitting the needle, and add a needle to the winding when there is still the last needle left. Then after weaving the last stitch, turn it over, continue to knit the next stitch, knit until there is still the last stitch left, and then wind the thread and add another stitch, as shown in the figure below.

3. Knit repeatedly until 10 stitches are added to the needle, as shown in the figure below.

4. Then knit the needle without adding or subtracting, and start to reduce the needle from the heel to the toe, as shown in the figure below.

5. The needle reduction method, the last 2 needles in each row and one needle, as shown in the figure below.

6. It is good to reduce to the needle and there are 6 stitches, these 6 stitches are used as the toe cap, and the sole is completed, as shown in the figure below.

7. Use a needle to pick 1 needle in each hole on both sides of the toe cap, pick it on 2 needles respectively, and start to knit the needle, as shown in the figure below.

8. When knitting to the left and right sides of the toe cap, there are 2 needles and one knitting needle, as shown in the figure below.

9. Weave it to the height of the upper in this way, as shown in the figure below.

10. After the upper is woven, start to weave the shoe tube, knit a needle, and then knit a needle, as shown in the figure below.

11. Weave to the required height, 5 and then close the needle and break the thread, hide the thread, and the woolen shoes will be knitted, as shown in the figure below.

I want to give the baby a pair of woolen shoes to put on the cotton pants, I don't know how to get a needle, I have the trouble of experience, teach it, thank you, I suggest you go to knit life**, look at everything there, I have played before,

The full tutorial method of making woolen shoes is as follows:

Demonstration in size 38 shoes:

1. The beginning of the sleeve needle: 39 needles

The first line of specific operations: three flat needles, one reverse needle, three flat needles, one reverse needle, three flat needles, and the rest of the needles are all woven reverse needles.

2. 47 needles on the rod needle

Now it's the upper and lower needles, which are transformed once in two rows to go back and forth. Specific operation: a flat needle, add a needle, a flat needle, add a needle, a flat needle, a reverse needle, a flat needle, add a needle, a flat needle, add a needle, a flat needle, a flat needle, that is, three leaves are the same, and the rest are all flat needles.

3. Middle: 13 stitches

Add 8 stitches on each side of the top and bottom, and the total number of stitches on the washboard is 25 stitches each, which is the height of the shoe. Specific operation: the third row, the flower is full flat needle, and the rest is full reverse needle.

4. Add needles to 25 needles

It's time to start knitting the uppers, so knit 25 on the right in one row, up and down in the middle, and one in the left. The fourth row, two flat needles, add one needle, two flat needles, add one needle, two flat needles and one reverse needle. Two flat needles, add one needle, two flat needles, add one needle, two flat needles and one reverse needle.

Two flat needles, plus one needle, two flat needles, plus one needle, two flat needles, and all the needles are knitted flat needles.

5. 63 rows of uppers

The original 25 stitches are sewn together with the right 25 stitches on the reverse side, and the additional 25 stitches are used as lining.

6. Pick the inner layer of weaving

To pick the inner layer of weaving, pick up the 25 stitches, the middle 13 stitches, and the additional 25 stitches.

The tutorial steps for hand-beating woolen shoes are as follows:

The line represents 1 back and forth (the reverse side repeats the color of the front).

2. The main color of white lattice weaving, and the color matching of colored lattice weaving.

3. The stitch method remains unchanged when weaving in each row.

Jersey pattern: front needle, back needle, upper needle.

One row is one row of patterns (no need to repeat the weaving, the reverse side of the next row of patterns).

2. The main color of white lattice weaving, and the color matching of colored lattice weaving.

3. The stitch method remains unchanged when weaving in each row.

Wool usually refers to yarn spun from wool, and also refers to threads spun from different types of chemical fiber materials, such as: acrylic fiber, polyester fiber, persian fiber and so on. Wool usually refers to yarn spun from wool, and also refers to yarn spun from different types of chemical fiber materials, such as:

Acrylic fiber, polyester fiber, persian fiber, etc. It is also used as a negative word to refer to something that does not make sense.

There are more than 10 types and thicknesses of wool, and we will briefly introduce several commonly used yarns.

Extra fine is one of the thinnest of the knitted yarns, which is characterized by its lightness and softness, and is most suitable for knitting baby and toddler sweaters or crocheting coats worn by women.

Extremely fine The thickness is equal to 2 of the finest hairs, and it is light and has a variety of colors, making it ideal for crocheting.

Medium and fine is the most commonly used wool variety, whether it is infants, toddlers, women or men's clothing can be woven with this coarse wool, weaving patterns are delicate and elegant.

Medium coarse is the most commonly used type of woven clothing to protect against the cold, and the woven clothing is neither too thick nor too thin.

High Thick is the best yarn for weaving cold clothing.

When choosing to buy yarn, it is essential to buy a sufficient amount to avoid situations where it cannot be completed due to destocking. On the other hand, although some of the best-selling yarn varieties are not out of stock, the stickers on the yarn balls must be retained for identification when purchasing.

The products can be divided into three types: pure wool, blended and chemical fiber. The main chemical fibers are acrylic fibers and viscose fibers. Although there are many varieties of wool, they can be mainly divided into four categories: wool, fine wool, color wool and factory-specific knitted wool.

1. Knit the sole. Start knitting the needle, and add a needle to the winding when there is still the last stitch left. Then after the last stitch, turn over the surface, continue to knit the next stitch, and weave until there is still the last stitch left, and then wind the thread and add another stitch. Repeat this until 10 stitches are added to the needle.

2. Knit the needle without adding or subtracting, and start to reduce the needle from the heel to the toe. In the needle reduction method, the last 2 needles in each row are combined with one needle. It would be nice to reduce it to the needle and have 6 more stitches. These 6 stitches are used as the toe cap, and the sole is completed.

3. Weave uppers. Use a needle to pick 1 needle in each hole on both sides of the toe toe, pick it on 2 needles respectively, and start to knit the next needle. Each time you knit to the left and right sides of the toe cap, you will have 2 stitches and a stitch of pure cracked knitting. I just weave it to the height of the upper.

4. Weaving shoe tubes. After the upper is knitted, start knitting the shoe tube, knitting a needle on the needle, and then knitting a needle on the needle. Knit to the desired height, then close the needle and break the thread, hide the thread, and the woolen shoes are knitted.

The soles of the feet are the parts we use every day to check the position, whether it is walking or shopping, the support of the feet is indispensable. In the winter, I always have to wrap myself like a penguin, for fear that the cold wind will frostbite me. But sometimes, we always ignore that the soles of the feet also need to be cared for.

Therefore, at this time, everyone especially needs a pair of warm and comfortable cotton shoes. Although there are many kinds of cotton shoes on the market, in winter, it will be more meaningful to make your own cotton shoes!

1.Prepare the [cotton shoe material package] to use.

2.Align the cotton upper with the heel and then suture it.

3.Fix the cotton insole to the upper with a marker buckle, and then sew it with a needle.

4.Put the [upper] on the top of the [sole], align the toe and heel [fix], and then use the upper shoe [special thread] to stitch.

5.Put cotton uppers; Stitched on the sole.

6.Turn the upper over, and then sew the collar to the inside, and the teaching of "cotton shoe making method is all over Hu Cheng" is completed.

The text of the tutorial is described as follows:

1. Start with about 46 needles first, you can change the number of needles according to the size of the foot and the thickness of the thread, knit 30 back and forth according to the size of the foot and the thickness of the thread, and then add needles when you start to knit the upper, after weaving to 13 needles, change the green thread to go back to knitting, knit 13 needles back and forth 2 rows, gradually reduce 4 needles in the middle to knit 7 rows back and forth, and add 1 needle to the edge of each row. Weave into the shape of a leaf, then change the yellow thread, pick the needle with the green thread and weave it, and continue to weave the needle back and forth.

2. Continue to knit the upper into the shape of 3 green leaves, and then weave the center green midline of the upper about 40 stitches, and then weave the other part of the upper in the above way. The fabric woven by crochet is filled with countless small loops, through which the thread is tied into a slipknot to form a loop, and then the hook is threaded through the first loop, and the hook is hooked to hook the other loop, which can gradually form a row of strings.

3. After weaving, fold it in half from the center position and merge the two sides of the heel into the upper. Knit the upper of another shoe with the same number of stitches and in the same way. In the last row, there will be only one movable loop strung on the crochet needle, and the new row can be returned to the old one, so that the loops on the string are hooked into countless rows, forming a piece of crochet.

High accompaniment. <>4. After all the weaving is done, prepare the sole, turn the upper into the opposite side, and sew it with a needle along the sole. Pay attention to the inside of the sole of the shoe, and turn the upper over after sewing the upper and the sole. Pretty woolen slippers are knitted.

The full tutorial method of making woolen shoes is as follows:

1, the first is the needle: 38-39 yards of shoes from 10 needles at the beginning of each knitting color plus 5 needles until the end of 35 needles, weaving back and forth 30 circles, weaving the first needle, the second needle plus a needle, weaving to the end of the remaining 2 needles with a needle on the left side of the pick out 2 needles do not weave, the back are knitting the second needle when adding a needle, the last two needles pick out not to weave, weaving to the end only 12 needles, the 12 needles and just picked out the 46 needles all knitted back and forth, and then change a color of thread to weave back and forth.

2. Now that the flowers are knitted, first weave 9 needles and then pick a needle without weaving. Knit three more needles, pick a needle without weaving, have been repeating 11 needles without weaving, only the back 8 needles remain, and vice versa is also like that, pick the past 11 single needles are still like that to pick the past without weaving, and the rest are all woven under the needle. Change the thread, weave 11 needles and pick 1 needle not to weave the same as the previous line, but the previous line can now be woven, and then knit three needles, pick another needle not to weave, and have been repeating 10 needles that do not weave past.

3. Change the thread, the same as the first row of pick weaving, first weave 9 needles and then pick a needle not to weave. Weaving three more needles, and pick a needle not to weave, has been heavy branches to block the complex has 11 needles not woven to pick the past, only the back 8 needles are left, in turn weaving is also like that, pick the past 11 single needles are still like that pick the past not to weave, the rest of all the knitting needle, the first pick of the needle, change the thread and then weave a back and forth, change the thread to weave a back and forth, and then start to pick the last three I-words.

4, for the fierce regret thread weaving a back and forth, pick out 12 knitting back and forth, the second line of weaving to the left needle on the pick 2 needles, weaving back is the last second or third needle and into a needle, just like the left pick 2 knitting, the last two or three needles on the right and a needle, has been weaving like this, and finally knitted out 35 needles, 35 needles have been weaving 30 back and forth, and then merge, you see I and the blue 5 needles, according to the beginning of the weaving of the piece and, weaving what color and what color all the end.

5. The following introduces how to prepare the thread first on the bottom, I use embroidery thread to sew the sponge bottom, the needle is the needle of embroidery wool flower, and the sole is already on the thread. Stitching the woolen upper and sole, first turn the knitted woolen upper over, and how to wrap the upper with the upside down. The middle of both ends should be sewn with thread, so that the yarn is fixed, the sewing will not be crooked, the rope is what we usually use on the sole, two strands, knotted, stitching is to pick up the needle wool and the bottom line of the shoe, just like that, this is the sewn bottom of the socks knotted.

6. Cut a rope, leave one on the top and wait for a good sewing, first put the sponge surface and the bottom together and fix the two ends with a thread, sew it like this, sew it like this, and sew it like this, put the sewn sea shoes on the upper, so pick a needle bottom and a needle sea, and always sew like this, the thread should be tightened, now turn it over, turn it over from the heel, and turn it over to the front to bend the shoes The last process pulls the wool inside, wraps the sea, sews with embroidered wool, and pulls it inside while sewing.

Hello dear, it is a pleasure to serve you: all tutorial methods for playing woolen shoes; 6 stitches from the red wool thread, weaving the first row; When turning back to weave the second row, the first stitch is not knitted, and a stitch is added before the last stitch, and the last stitch is knitted; Then go back and weave the third row, the first needle is not knitted, at this time, it is already 7 needles. At the beginning of the fourth row, use yellow wool, tighten the red thread a little, pull it to the back, and use the yellow thread to cross the red thread and start weaving.

The first stitch is removed directly and is not knitted; The second needle begins to weave the yellow thread, and when it reaches the penultimate needle, one more needle is added, and the last one is knitted; Then go back and weave the fifth row, and the first stitch is not knitted, at this time there are a total of 8 stitches. At the beginning of the sixth line, first pull the yellow line to the back, press (cross) with the red line and start weaving the sixth line, the method is the same as above. Repeat this and so on, burying the weaving section to about 54 stitches (you can measure the edge of the needle with a single measure of the sole, tighten it a little, and measure half of the sole - the midline is separated, and only half of the edge is measured.) , starting with the front toe part of the shuttle shoe. Take the yellow line as an example. The first row of yellow thread is woven past, and the last 4 stitches are not woven in the past, and the red thread is woven in the past. , and then turn back to weave to the yellow line just now when there are 4 stitches, change the yellow thread weaving, so that has been shuttle 8 small pieces (5 needles each, a total of 40 stitches), the remaining more than 10 needles do not add or subtract the weaving, the same remember to change the thread, weave three back and forth (that is, yellow-red-yellow, the middle is facing red). After weaving the middle part, the red thread begins to shuttle back. Namely:

When weaving the red thread, first weave the last dozen needles, close the combustion and then weave the remaining 5 needles (red) together, after weaving these 5 needles, immediately change to yellow thread and weave it, turn back and weave the remaining 5 needles (yellow) in front of it, and so on until all the 40 needles of the front shuttle are finished. After all the remaining 40 stitches in the middle are finished, the first line of weaving will pay attention to the beginning of the needle, that is: the original needle place, now it becomes the last two stitches into one stitch, be careful not to pull too tight, the edge is too tight to make the upper smaller, left and right asymmetrical.