-
In general, this is not possible or necessary.
Since it is a remote connection, for example, if you are in the workplace, you must connect your home router through the Internet, and the WAN port of the router has been connected to the Internet. Think about it, if you want to achieve the goal of just surfing the Internet, then, since you are already able to surf the Internet, do you still need to connect to the router at home to surf the Internet? Unless you have other special uses, such as apps like VPNs.
If you can't connect to the internet, then let alone access your router. Therefore, this idea is unrealistic.
However, if you are in a hurry and have to do that, there are other ways, and it depends on you to weigh it.
To access the Internet through your router, then, your current location, must be able to connect to the router's LAN port, then there are three ideas:
In wired mode, put a network cable from the LAN port of your router to your current location. Not to mention the transmission distance supported by the network cable, it is just the work of setting up the network cable, can you complete it? This is patently impractical.
Using wireless means, a wireless bridge is set up between your home and your current location, which allows you to access the WAN port of your router through wireless transmission. Generally speaking, two points of barrier-free visibility are required, and if there is an obstacle in the middle or the distance is too far, a number of relay devices need to be added in between. I once succeeded in 5km point-to-point relayless networking.
For idea 2, make an extension, make full use of the current wireless base station resources, and omit the relay link. For example, as long as your router LAN port (which has nothing to do with the router WAN port) is successfully connected to the wireless base station of China Unicom near your home, then as long as there is a wireless base station of China Unicom in your current location, you can borrow the wireless channel of China Unicom and connect it directly to your router. This method requires in-depth knowledge of the network, otherwise it is difficult to ensure smooth and secure communication.
This method has been successfully measured.
-
First, you need to turn on Remote Desktop Services on your home computer. In My Computer-Properties-Remote. Then open Start-Accessories-Remote Desktop connection on the company's computer.
Or Start-Run, enter mstsc to open the remote desktop connection. Just enter the link to your home's IP address.
-
Hello, 1, the first step, you want to use the laptop to use wifi to surf the Internet, first of all, you need to create a wireless network connection for your laptop, take win7 as an example, click on the "Start button menu" in the lower right corner, and then click on the "Control Panel". 2. Enter the "Control Panel", you can see the text of "Network and Internet". 3. Enter the "network and Internet", and then click to enter the first orange menu at the next level, there is a "network and sharing center", which is a function that must be used for computer networking in the win7 system, and the broadband network or wireless network must be opened to "open the network and sharing center" to set up.
4. Continue to click on "Network and Sharing Center" and enter and see that there is a "Set up a new connection or network". 5. Select "Connect to Internet", Win7 will automatically search for a wireless WiFi network with a signal. 6. At this time, find your own wireless route, click to enter the password, and you can quickly get on the early group network.
If it's wifi outside, most stores have wifi sharing, just ask the clerk. If the wifi does not have a password set. You can access the Internet by connecting directly.
Open it. Router.
Port Mapping. >>>More
To put it simply, the router is used for automatic dialing, as long as your router has a few jacks, it will work, if there are only 2 jacks (one is ** line, one is network cable) then it is terrible. >>>More
You need to set the dial-up type and enter the password for surfing the Internet. >>>More
Dial-up Internet access with cat settings Set permanent**! Or use the router to set up automatic connection PPPOE dialing, routing settings DHCP enabled, computer IP, DNS automatically on the line!
If you use a router to surf the Internet, DNS is the same as the gateway address, that is, the address of the router, which is generally or, and there are but very few. Generally, if you haven't entered the router, it defaults to DHCP is turned on, that is, the machine connected to it is set to automatically obtain, and you can get the network settings. >>>More