Can I hit the wall for decoration? Is it troublesome to hit the wall of the house with decoration

Please be sure to pay attention to the following points when decorating the wall:

1.The load-bearing beams at the top of the house cannot be removed: some people feel that the beams on the top of the house affect the aesthetics when decorating, and plan to knock off the protruding parts of these beams.

In fact, the beam in the middle of the house should never be knocked on, because the beam supports the upper floor, and knocking on the wall or renovation will cause the upper floor to fall.

2.If there is a beam attached to the top of some walls, you can only knock on the bottom of the beam. For example, the wall between the bedroom and the study should be knocked out at this construction site, but there are beams on the wall, which cannot be moved here, otherwise there are potential safety hazards.

If you can't knock on the beam, you can use the ceiling to hide the beam, which will not affect the appearance.

3.Do not knock on the wall connecting the balcony: In order to improve the lighting of the room, some landlords knock out part of the wall connecting the balcony and increase the width of the balcony door, which is not allowed. Because the exterior walls of the house are usually load-bearing walls, it is very dangerous to even dig holes in them and open windows.

4.There was originally a window and a door on the wall between the room and the balcony, and these doors and windows could be knocked on, but the wall under the window could not be knocked off. This section of the wall on the window line is called the "counterweight wall", and it plays the role of provoking the balcony.

If this wall is removed, the load-bearing capacity of the balcony will decrease, causing the balcony to fall.

5.It is forbidden to remove the load-bearing wall: The load-bearing wall cannot be demolished and changed in the decoration, as many people know.

But what kind of wall is a load-bearing wall, not many people can say clearly. The load-bearing wall is the wall surface without prefabricated ring beams on the wall, and the wall thickness of the load-bearing wall on the floor plan is obviously thicker than that of the non-load-bearing wall, and the thickness of the solid wall is generally 24 cm, and the non-load-bearing wall is 10 15 cm. Exterior walls are usually load-bearing walls, and walls shared with neighbors are also load-bearing walls.

Generally, non-load-bearing walls are used in bathrooms, pantry, kitchens and hallways. <>

Load-bearing wall Load-bearing wall must not be moved, not even to dig a large area of holes in it, otherwise the consequences will be serious. Part of the non-load-bearing wall After the building is built, the wall that rises after the span is relatively large, structurally speaking, this kind of wall belongs to the non-load-bearing wall, but it plays a great supporting role in the house, and it can not be demolished and modified at will. For non-load-bearing walls under concrete beams, do not act rashly.

For example, there is no danger in the demolition and modification of light structural walls, such as light steel keels, gypsum board walls or cement board light walls, and such non-load-bearing walls can be demolished. Identification of non-load-bearing walls and load-bearing walls.

Judging by the sound: when you knock on the wall, there is a crisp echo, it is a light wall, and the load-bearing wall should not have too much sound. <>

It is not a hassle to hit the wall of the house with decoration. However, when demolishing and renovating, it is necessary to pay attention to distinguishing between load-bearing walls and non-load-bearing walls, non-load-bearing walls can be demolished, load-bearing walls can not be touched, and before the decoration and construction, it is necessary to report to the rock excavation industry, and it can only be carried out after obtaining consent.

1. The load-bearing wall cannot be dismantled. A load-bearing wall is a wall that supports the load-bearing structure of the upper layer. In general, the location marked in black on the floor plan is where the load-bearing wall is located.

You can also use a tape measure to measure the thickness of the lower wall, which is generally about 24cm thick and is load-bearing wall.

2. The load-bearing beams and columns are not detachable. These beams and columns are used to support the upper layer, which will fall off after being removed, which is very dangerous. Rough lines.

3. Steel bars on the wall. If the structure of the house is anthropomorphic, then the steel bars on the walls are the bones of people. When tangentiating, avoid the rebar and it is best not to cross-cut. If the rebar is damaged when the pipe is buried, it will affect the bearing capacity of the wall and floor slab.

4. The low wall next to the balcony cannot be removed. There is a door and a window between the room and the balcony. These doors and windows can be removed and modified, but the walls under the windows cannot be moved. This part of the wall is called a "counterweight wall", and it acts like a weight to lift up the balcony.

When decorating, the building on the same floor can be opened, but it must be declared first, and it is illegal to open it without permission, and it may also bring harm to the main structure of the house. Before preparing for construction, you need to contact the property to see if the wall can be opened, the load-bearing wall can not be moved, and the professional team should be asked to construct the wall after determining it, and be careful not to damage other walls during the period.

Summary. Yes, but there are some aspects that are not recommended to be smashed:

1. The wall connected to the ventilation duct cannot be removed.

2. The non-load-bearing wall with a distribution box on the wall cannot be removed;

3. The counterweight wall and shear wall of its auxiliary support role cannot be removed.

Can you knock down the wall when decorating?

Hello, I am sorting out the answers according to your questions, please wait a while Is it legal for the property to have water and electricity outages.

Yes, but there are some aspects that are not recommended to be smashed: 1. The wall connected with the ventilation pipe cannot be removed 2. The non-load-bearing wall with a distribution box on the wall cannot be removed; 3. The counterweight wall and shear wall of its auxiliary support role cannot be removed.

If you have not paid the bill, the property is legitimate.

Dear, I'm glad to answer for you: Does the decoration company play the wall and not the concrete wall? A:

First of all, you should talk to the property before you hit the wall: according to the normal situation, when the developer hands over the house, the design unit of the house will leave a drawing to the property company. The thickness and material of various walls such as load-bearing walls and non-load-bearing walls are clearly marked on the drawings.

Based on the drawings, the property company will be able to determine which walls can be knocked on. Therefore, before the wall renovation, the design drawings must be submitted to the property management company, and the construction can only be carried out after the approval of the property, and the load-bearing beams at the top of the house can not be removed, because the beams support the upper floor slab, knocking on the wall or renovating will cause the upper floor slab to fall. If there is a beam attached to the top of some walls, you can only knock on the bottom of the beam.

Do not knock on the wall connecting the balcony, because the exterior wall of the house is usually a load-bearing wall, and it is very dangerous to open a window even if you dig holes in it. There was originally a window door on the wall between the room and the balcony, and these windows could be knocked out, but the wall under the window could not be knocked off. This section of the wall on the window line is called the "counterweight wall", and it plays the role of provoking the balcony.

If this wall is removed, the load-bearing capacity of the balcony will decrease, causing the balcony to fall. It is forbidden to dismantle the load-bearing wall, the load-bearing wall is the wall surface without the prefabricated ring beam on the wall, the wall thickness of the load-bearing wall on the floor plan is obviously drawn thicker than the non-load-bearing wall, and the thickness of its solid wall is generally 24 centimeters, and the non-load-bearing wall is 10 15 centimeters. Exterior walls are usually load-bearing walls, and walls shared with neighbors are also load-bearing walls.

Non-load-bearing walls are generally used in bathrooms, pantry, kitchens and hallways. In addition, the wall is safely knocked off, but the later repair work cannot be ignored. For example, when knocking out the original wall and building a new wall with red bricks, it is necessary to set up a large tension bar on the newly built wall.

Stretching is the construction method of the joint of the old and new walls, that is, the new and old walls are pulled with steel bars to ensure the stability and seismic resistance of the wall. Holes should be dug in the walls, and a reinforced concrete beam should be erected on the T side of the door opening."The pressure of the T-square wall does not allow the pressure above the wall to be pressed directly against the wide frame.

Summary. You can pound a few holes in the wall, thread the rope through both holes, and pull harder.

Or, dig a hole in the wall, thread a rope through the hole, and tie a long stick outside the hole. Then, pull the rope.

If it's a simple brick wall, method three:

By digging at the foot of the wall, you can hollow out the soil under the wall.

Push with a stick, or pull with a rope, so that the wall falls backwards to the hollowed-out side.

Note] Avoid the wall falling down on people.

When a brick wall is torn down, the bricks tend to separate automatically. Generally, just picking up the bricks is successful.

If the four walls are joined together, then:

Manually remove the four corners so that the four walls are not connected. There is no way to save trouble.

Tear down every wall again.

Artificial demolition method of reinforced concrete wall.

Smash with a sledgehammer, little by little.

Decoration needs to hit the wall, what is the correct way to operate?

You can pound a few holes in the wall, thread the rope through both holes, and pull harder.

Or, dig a hole in the wall, thread a rope through the hole, and tie a long stick outside the hole. Then, pull the rope.

If it's a simple brick wall, method three:

By digging at the foot of the wall, you can hollow out the soil under the wall.

Push with a stick, or pull with a rope, so that the wall falls backwards to the hollowed-out side.

Note] Avoid the wall falling down on people.

When a brick wall is torn down, the bricks tend to separate automatically. Generally, just picking up the bricks is successful.

If the four walls are joined together, then:

Manually remove the four corners so that the four walls are not connected. There is no way to save trouble.

Tear down every wall again.

Artificial demolition method of reinforced concrete wall.

Smash with a sledgehammer, little by little.

Many people are willing to re-plan the house when decorating the house, and will knock out part of the wall to increase the space, but many people know less about the wall of the house. These questions are more critical about how to charge for decorating a house and what to pay attention to when decorating a house and building a wall. Today, let me share with you some relevant knowledge about the charges for building walls and the matters that need to be paid attention to when building walls.

1. How to charge for decorating the house and hitting the wall.

1. The price of decoration and demolition of the wall is generally 80 yuan for the interior of the wall, in addition to the relevant labor costs and auxiliary materials, about 200 yuan per square meter, 100 yuan per square meter for a single wall, the cost of different regions is not the same, so there will be some deviations, you can compare more, and then choose the right master to operate.

2. Decoration and demolition of the wall and wall precautions Demolition and wall building is the step of decoration, when demolishing the wall, you need to pay attention to the following two points, the load-bearing wall in addition to bearing its own gravity, but also bearing vertical pressure and lateral tension, the load-bearing wall is the main structure of the building, which in China's building regulations clearly stipulate that the load-bearing wall shall not be removed.

Second, what matters to pay attention to when decorating the house and hitting the wall.

1. The top beam cannot be removed.

Although the roof beams can sometimes affect the aesthetics of the house, they cannot be removed. Removing the roof beam can easily lead to changes in the bearing capacity of the wall bench hollow, and in serious cases, it will cause the wall structure to deform, once the disaster occurs, the earthquake carrying capacity is relatively poor, and the serious will lead to the collapse of the house and personnel, so remember not to remove the roof beam.

2. The load-bearing rough debate wall must not be demolished.

The load-bearing wall supports the structure of the roof with the wall, its longitudinal bearing force is very strong and blind, it is composed of a single row or a double row of steel bars inside, the structure is very reliable and stable, the load-bearing wall not only bears its own gravity, but also bears vertical pressure and transverse tensile force, the load-bearing wall is the main structure of the building, which clearly stipulates that the load-bearing wall shall not be removed in China's building regulations, and the load-bearing wall can not be changed without permission, and the load-bearing wall is not only destroyed but also destroys the integrity of the building. When disaster strikes, we will face a catastrophe. Therefore, it must be scientifically transformed, and it must not be arbitrary.

The above is for you to share how to charge for decorating the house and what to pay attention to when decorating the house, I hope it will help you. If you want to know more about decorating your house and hitting the wall, please stay tuned.