Can floor tiles be attached to the wall? Can you directly put tiles on the wall tiles?

Floor tiles and wall tiles, although they are both bricks, there are still some differences. However, in recent years, floor tiles on the wall have become a more popular decoration method. Why do you lay floor tiles on the walls?

Because many people feel that the floor tiles are more textured and have more textures, the wall will make the space look more fashionable and changeable.

So can all floor tiles be on the wall? What are the precautions for floor tiles on the wall? Let's listen to 818 today!

Can floor tiles and wall tiles really be mixed?

In fact, the wall tiles are pottery products, and the floor tiles are porcelain products, and the two are not free to use and match due to their different water absorption rates, and they must be used professionally. Among them, the water absorption rate of wall tiles is about 5%-8%, and the floor tiles are only or lower.

Since the floor of the bathroom and kitchen often needs to be washed with clean water, the floor tiles with low water absorption should be laid, so that they are not easily affected by water vapor and are not easy to absorb stains. The wall tiles are glazed, with a high moisture content, and their backs are generally rougher, which is conducive to the wall tiles being more firmly attached to the wall.

Therefore, it is best not to mix wall tiles and floor tiles, otherwise it is likely to bring inconvenience to life.

As we all know, the floor tiles have to be laid on the ground for people to step on, and the furniture is placed on them, so the floor tiles are much heavier than ordinary wall tiles, and its water absorption rate is low, so the traditional cement mortar method is difficult to paste the floor tiles on the wall.

At the beginning, people who wanted to put floor tiles on the wall didn't know this, and still used the way of sticking wall tiles to stick floor tiles, and it didn't take long to find that the good-looking floor tiles on the wall were hollow and falling off.

In terms of cost, floor tiles are cheaper than wall tiles, and the construction cost of floor tiles is high, and porcelain tiles are cheap to use cement directly, so that is to say, floor tiles, without professional materials, directly with cement may have potential safety hazards. Therefore, if you need floor tiles on the wall, then you must choose whether the construction is reliable, otherwise it is difficult to ensure the follow-up quality.

The floor tiles are very hard and tight, and if you need to punch holes in the wall later, it is easy to break the floor tiles. Therefore, it is not the best choice for floor tiles to go to the wall, and it is better to have the floor tiles and wall tiles in place!

I think it can be attached to the wall. Because whether it is attached to the wall or the ground, it is a brick, and it feels the same thing.

Floor tiles generally cannot be attached to the wall, because the floor tiles are very large and square, because the general wall tiles are rectangular.

Can floor tiles be attached to the wall? I think the floor tiles should be able to be attached to the wall. As long as the pattern is right. I think it's pretty to fall out. I think the ground should be able to stick to the wall.

It's totally fine, it just doesn't look very aesthetically pleasing, but it's hard enough.

Although many owners have this idea, they all feel that this can save the time and economic cost of demolishing old tiles, but in practice it is not recommended to do so because:

1.The surface of the tile is very smooth, and it is difficult to stick a new tile on the surface of the tile.

2.Whether the original tile is firmly pasted remains to be considered, and the gravity stretching problem also needs to be taken into account when sticking on the wall, if the new tile is pasted on it, the load of the original tile bonding layer will be increased, and the possibility of falling bricks due to the influence of gravity will be increased in the later stage;

3.Tiles on top of tiles will also increase the thickness of the tile paving and take up valuable space.

I hope it can help you, and if you still have questions, click on the avatar and wait for you to tease

Answer: The method of laying tiles directly on the uneradicated tiles not only saves time and effort, but also reduces the pressure on the budget on a certain basis. However, if the original tile is damaged and bulging, it is not possible to re-tile the original tile. If you force a new tile to be pasted, it will cause the new tile to be used for a short time and may fall off at any time.

2. To paste new tiles on the original quota tiles, it is necessary to retain a certain gap, which can prevent the new tiles from bulging.

3. Before pasting new tiles, the surface of the original tiles should be cleaned and there should be no dirt. Then add some tile adhesive to the surface of the original tile, and paste an extra layer on the back of the new tile. Tiling is what you need to pay attention to.

1. Chisel the surface of the floor tiles. We don't need to remove the original tiles, but we can use a percussion drill or an electric hammer and pickaxe to chisel the surface of the tiles that have been paved, and these can be grooved into a rough surface. In this way, it is conducive to the combination of cement mortar and these rough surfaces, and there will be no later delamination.

2. Deal with local loose and hollow tiles. If we find loose and hollow tiles in the process of chiseling, the tiles must be removed and electrified, and then the loose cement mortar also needs to be chiseled off. Hollow drums and loose drums are not allowed.

3. Leveling the ground part of the ground after the chisel is removed. For example, after we remove the original loose tiles, the elevation of these floors is lower than the surface of the original tiles, and these positions need to be leveled with cement mortar.

Personally, I think that the choice of the brick wall directly pasted with the practice of tiles, it is obvious that the brick wall is not enough to understand the role of the batch of ash layer, we use cement mortar to paint the brick wall, not only to ensure the flatness of the wall, but also to enhance the structural strength of the brick wall, to provide very good protection for the brick wall, and also have a certain waterproof effect. Therefore, it is not a good choice to omit this process and directly pave tiles.

As we all know, cement mortar is generally used for tiling, but in recent years, there have been more tile adhesives on the market, and I don't know which one is better to use!

Let's look at the cement mortar first, that is, it is mainly cement, add yellow sand and some waterproof additives, and then stir with water, which is basically zero pollution, high adhesion, and preferential treatment.

But the bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off.

From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles. However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that it is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde.

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

Of course, good things are generally expensive, so there is no need to use tile adhesive in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with general cement.

It is possible to lay new tiles on top of old tiles, but few people do this because there are many disadvantages.

The new tile is not very reliable directly on the old tile, because the old tile, the surface is still relatively smooth, if the new tile is directly paved on it, you need to use the tile adhesive, but the effect is not very good, easy to cause bulging, falling and other phenomena. And tile adhesive is a powdered adhesive that contains a certain amount of formaldehyde, which is not environmentally friendly.

On the surface of the old floor tile brush on the tile surface treatment agent, tile mosaic binder, etc., if you do this, the ground leveling is difficult, you need to re-level the place that produces hollowness, and because the old tile plus the original cement mortar has a certain thickness, after paving the new brick, the ground height will increase. Therefore, in order to use it for a long time, it is better to shovel off the old tiles first, and then paste the new tiles. There are now well-known brands in the market, such as:

Dongpeng, Oushennuo, Marco Polo, etc., mainly depends on your personal preference and suitable for your decoration style, it is recommended to compare the physical object in the physical store, I hope you can choose the right product for yourself.

Floor tiles. On the wall, the effect is atmospheric, wear-resistant, and has a certain texture. However, there is a big difference between floor tiles and wall tiles, wall tiles are pottery products, floor tiles are porcelain products, and the two cannot be used at will because of the different water absorption rates.

The water absorption rate of wall tiles is about 5 8, while that of floor tiles is only 0 5 or less. The moisture content of wall tiles.

high, and its back is generally rougher, which helps it to fit more firmly against the wall. The wall tile body has many pores, which is conducive to bonding, and the water absorption rate of the floor tile is far lower than that of the wall brick, which is easy to cause hollowing when paved on the wall, and the brick is easy to fall off after a long time, and there are potential safety hazards.

The floor tiles can be thinly pasted on the wall. The so-called thin paste is to use adhesive to combine the brick and the wall together. With this method of operation, only adhesives or tile adhesives are used when paving, and no cement mortar is used.

Therefore, the thickness is very small, so it is called thin sticker. The thin paste method will have higher technical requirements for workers. Because the adhesive has a high adhesive strength, it is difficult to correct if the sticker is crooked after it is pasted. Unlike traditional stickers, if you are not satisfied, there is a possibility of correction.

Therefore, the floor tiles on the wall, to ensure good construction, otherwise, the consequences are difficult to predict.

Try not to stick the floor tiles to the wall. It can be used if it is to stick a baseboard 8 to 10 cm high with floor tiles. If it is used to decorate the background wall or play a waterproof function, there are special tiles, which are not only lightweight, but also have strong specificity and play their respective functions.

The floor tiles are relatively thick and heavy, and their wear resistance is outstanding, and the role is different from that of wall tiles.

The specifications and characteristics of floor tiles in home decoration will definitely be higher than those of wall tiles, because floor tiles are the main bearing body in daily life, and the material type, color matching and pattern style of floor tiles on the market are optional, and the space is relatively large. Therefore, the decorative effect expressed by the wall tiles on the wall will be more prominent than that of ordinary wall tiles, making the overall kitchen space more atmospheric. At the same time, due to the relative size of the floor tiles, it is easy to clean and take care of the later life, and the floor tiles on the wall are now popular paving methods, which are good in terms of decorative effect.

X0D X0A 3. The labor cost of the floor tile on the wall is high, and the construction is difficult. Floor tiles on the wall is a popular way to pave now, especially for self-built houses or villas, which does look very atmospheric and beautiful. However, it cannot be pasted with cement mortar, it is easy to fall off the bricks, which will be very dangerous.

x0d x0a From the above problems, the problem of whether the floor tiles on the wall is good or not still needs to be based on the specific preferences and special requirements of each family and each owner, and the construction party needs to carefully do a good job in the process of floor tile wall paving under the requirements of the owner to avoid falling off in the later stage.