How to install the floor socket in the living room, how to install the floor socket in the living ro

1. Confirm the position of the bottom box and pre-embed the bottom box.

2. Pay attention to the embedded bottom box, the bottom box can not be as flat as the ground, and must be 5-10mm lower than the ground, so that when installing the ground plug, it will not cause the ground plug to be higher than the ground, resulting in a gap.

3. Put the power cord through any of the four openings on the bottom box.

4. Fix the bottom box on the ground.

5. Connect the power cord directly to the terminal block behind the ground plug (adapter), and the neutral wire and live wire are marked on the terminal.

6. Use two screws to fix the ground plug on the bottom box.

HAYIKAR Haoyijia, specializing in the production of ground sockets, desktop sockets, power rail sockets, enterprises support OEM, ODM customization.

Step 1: Installation of the back box.

First of all, determine the installation location, the installation of the floor socket in the living room is best to choose a dry space location, reliably connect the bottom box with the metal wire pipe, and pour concrete to fix the bottom box. Secondly, to determine the depth of embedding, generally speaking, in order to ensure that the upper cover can fit perfectly with the ground, the upper end of the bottom box should be 3-5mm below the ground level, so as not to be too protruding to bring potential danger, and not to invert inward and inconvenient to use.

Step 2: Installation of the upper cover.

After pouring concrete and fixing, remove the protective cover of the bottom box, clean the dust and debris in the box, and clean up the places with gaps. Secondly, anti-corrosion paint is applied around the hole and the concrete material around the hole must be completely dried before installation. Since the socket is installed on the ground, it is in direct contact with the tiles on the ground, if there is no anti-corrosion treatment, the concrete material that has not been completely dried will appear after contacting the metal, and the cover will be corroded.

After the anti-corrosion treatment, connect the grounding wire between the bottom box and the upper cover. Finally, secure the upper cover.

Socket installation method in the living room, design a five-hole socket next to the sofa in the living room or at the bend of the living room, design a five-hole socket on the side of the sofa cabinet, install a three-hole socket next to the sofa or the corner of the living room, place 1-2 five-hole sockets on the face of the sofa or on the wall next to it, prepare three switch sockets in the living room, place a socket in the position of the air conditioner, and place a three-hole multi-function socket next to the sofa.

I don't know if you have this kind of experience.,The mobile phone is playing happily.,Suddenly the power went out.,And then Zhenyu looked for a socket everywhere.,Found that the socket was far away from the sofa.,Now I can only watch TV boringly.。 That's when people think: if only the socket was right next to the sofa.

The floor socket in the living room can meet everyone's wishes, let's take a look.

Ground socket Floor socket, abbreviation: ground socket. Full Name:

Household and similar ground outlets. The socket installed on the ground or similar field and used for connection with the fixed wiring is usually used as the terminal and outlet of the ground wiring system to take out the power supply, signal and data in the ground wiring system. It is mainly used in offices, airports, hotels, shopping malls, homes and other large indoor places, and has a wide range of uses.

The floor socket in the living room is the ground socket installed in the living room, which is generally used for TV and network power supply in the living room.

Living room floor socket - installation of the bottom box: First of all, determine the installation location, the ground plug installation is best to choose a dry space location, the bottom box and the metal wire pipe are reliably connected, and concrete is poured to fix the bottom box. Secondly, determine the depth of embedding.

Generally speaking, in order to ensure that the lid fits perfectly with the ground, the upper end of the bottom box should be 3-5mm below ground level, so that it does not protrude too much and pose a potential danger, and it does not sink inward to make it inconvenient to use.

Living room floor socket - installation of the upper cover: After pouring concrete and fixing, remove the protective cover of the bottom box, clean the dust and debris in the box, and clean the places with gaps. Secondly, anti-corrosion paint is applied around the hole and the concrete material around the hole must be completely dried before installation.

Because the ground plug is installed on the ground, it is in direct contact with the tiles on the ground, if there is no anti-corrosion treatment, the concrete material that has not been completely dried will contact the metal, and the alkali phenomenon will appear, and the cover will be corroded. After the anti-corrosion treatment, connect the grounding wire between the bottom box and the upper cover of the Yuwu rock. Finally, secure the upper cover.

The installation of the floor socket in the living room mainly follows two principles, one is the bottom box first and then the cover, and the other is that the installation location must be in a relatively hidden place that is not easy to enter the water to ensure safety. If you want to know more about the floor socket in the living room, you can go to the system introduction page of this site to learn about the relevant knowledge.

There are more electrical appliances used in the living room, and for the daily convenience of the owner, the floor plug is installed in the living room when decorating, so what are the steps for installing the floor plug in the living room? If the owner is sure that he needs to install a floor plug in the living room, he should also be clear about what needs to be paid attention to when installing the floor plug in the living room? Pay attention to ensure the installation effect.

1. What are the steps for installing the floor plug in the living room?

1. Try to choose a relatively dry space for the installation position of the ground plug, connect the bottom box with a metal wire pipe, and then use the pouring concrete mountain soil to fix the bottom box. Then determine the depth of embedding, in order to ensure that the upper cover can be parallel to the ground, the best position of the upper end of the bottom box is 3-5 mm below the ground level, so as to avoid the danger of protruding in the later stage.

2. After waiting for the pouring concrete to be fixed, remove the protective cover of the bottom box, and pay attention to cleaning the box and the gaps at the time. Then apply anti-corrosion paint around the hole in the ground, taking care to wait for the concrete material to dry before installation. Because the ground plug needs to be in contact with the floor tile, if there is no anti-corrosion treatment, the undried concrete is easy to cause pan alkali phenomenon after it comes into contact with the metal.

After the corrosion protection is completely treated, connect the bottom box and the upper cover immediately. Then secure the lid.

Second, what need to be paid attention to when installing ground plugs in the living room.

1. The installation method of floor type. This installation method is usually suitable for the base surface of raised anti-static floors. First of all, open a square hole in the position where the ground plug needs to be installed, but pay attention to the size of the hole should be about 5mm larger than the actual size of the steel bottom box, and the upper face of the steel seat box should be 3-5mm for the floor surface, so that the gasket can be increased or decreased for different thicknesses.

2. The installation method of the embedded type, this installation method is usually used on the base surface of concrete casting. The specific installation method is to fix the steel bottom box first, and then connect the steel bottom box in series with a metal wire pipe, at this time, it should also be noted that the upper end face of the steel bottom box is best kept at a depth of 3-5mm below the ground level, and then cast the coagulation around it and do a good job of fixing.

3. Special attention should be paid to the place during installation is how about the protective wiring measures of the ground plug connection, whether it meets the national construction acceptance specifications, and whether the wire enters the appliance is well insulated, whether there is damage to the wire core, etc.

What are the steps to install a floor plug in the living room? The work of installing the ground plug needs to be handed over to the decoration master who specializes in the industry, and the decoration master will complete it. What do I need to pay attention to when installing a floor plug in the living room?