-
Anonymous users2024-02-061. Problems with the graphics card.
If the graphics card is broken, there will be a blurred screen, and dust will also appear, check the graphics card, open the chassis to remove dust, this reason is the most likely.
2. Problems with the display screen.
Check the monitor to see if it's normal. Here's how:
Put *** into the optical drive to see for 30 minutes,See if there is a phenomenon of a blurred screen,If there is a basic one, you can conclude that the display is broken,If not, it is not a problem with the display。
3. Software conflicts.
Software conflicts can also occur sometimes, but the green stripe is rare.
4. System problems.
If the fault persists, we recommend that you reinstall the operating system.
Even though the graphics card mentioned above is the most problematic, remove the dust, repair and replace it with a new graphics card.
-
Anonymous users2024-02-05There are times when our monitors appear with horizontal streaks, what should we do? Let me give you a brief introduction to the solution to the horizontal stripes on the display! Hope you enjoy it!
The workaround for horizontal stripes on the monitor:
First of all, it is necessary to distinguish whether it is a problem with the signal itself or a problem with the display, you can find a monitor to see the same content and compare, and preliminarily judge that it is not your display problem.
The display is rippled and jitter.
Phenomenon: The display screen is rippling or shaking.
Problem exploration: 1. The resolution or refresh rate is set too high, and the monitor or graphics card is overwhelmed.
2. The quality of the display is poor.
3. Disturbed by magnetic field.
Solution: The display has ripple shaking, which is generally caused by the graphics card or monitor being overwhelmed and thus unstable. In this case, the user should first determine whether it is the cause of the graphics card or the monitor, and then repair or replace it appropriately according to the situation.
As for some false black situations, such as the display does not check the power supply, the socket board can not supply power, etc., these need to be paid special attention by the user himself.
A horizontal line appears on the display screen.
Phenomenon: 1. The horizontal line is relatively stable and fixed.
2. The jumping horizontal line even brings the computer to crash and restart.
Display horizontal line.
Problem exploration: 1. If it is a relatively stable horizontal line, it is generally a quality problem of the display itself, a broken internal screen line or other conditions.
2. The jumping horizontal line is generally a problem with the graphics card. It is possible for the graphics card to overheat or to damage the graphics card.
Solution: 1. If the display is problematic, the user should send it for repair or replace the screen cable by himself to check and repair.
-
Anonymous users2024-02-04Hello, solution 1: The phenomenon of irregular stripes in the laptop caused by the failure of the graphics card is the failure of the graphics card caused by the use of the computer for a long time, if there is such a situation, you should turn off the computer in time, let the computer rest for a while, so that the graphics card of your laptop is buffered slowly, otherwise the graphics card will be damaged after long-term use. In addition, the screen of the laptop should be wiped frequently, so as to ensure the cleanliness of the laptop screen, because once the inside of the screen enters the dust, it will damage the chip of the laptop screen, which is relatively fragile and cannot be restored once damaged, so it is very important to keep the laptop screen clean.
Solution 2: If the refresh rate is set too low, it will cause the screen to shake, the check method is to right-click the blank area of the system desktop, and click the "Properties" command from the pop-up right-click menu to enter the property setting window of the monitor. Click the "Settings" tab in this window, and click the "Advanced" button in the corresponding label page that pops up behind it to open the advanced property settings interface of the monitor.
Then click on the Monitor tab where you can see the monitor's.
The motherboard is a little more likely, or it may be a problem with the graphics card, you first unplug the graphics card and clean it up, as well as the memory, and try again.
There are many reasons for the failure of the computer to turn on the black screen, such as the display is damaged, the motherboard is damaged, the graphics card is damaged, the graphics card is in poor contact, the power supply is damaged, the CPU is damaged, etc. For the treatment of the black screen of the computer, the method of eliminating and replacing is basically adopted, and the principle should be based on replacing and eliminating the most suspicious parts first. >>>More
First rule out whether the display problem causes no display, take your monitor to other computers to try if it can be used normally, if you can't check whether the data cable is broken and internal components, if it can work normally on other computers, then you check the hardware in the host Follow-up question: Last month my monitor also had this situation, the monitor suddenly turned off, no response, and then I don't know how to get the monitor indicator light to turn on and you can use it! ： >>>More
The color of the computer display is incorrect, you can adjust it according to the following steps (take Win7 N card as an example): >>>More
It hurts your eyes even more with an LCD screen!
According to a recent survey by the authoritative German computer magazine "Macwelt", although the radiation of liquid crystal displays is much smaller than that of ordinary displays, because of its high brightness, it is more likely to make our eyes tired, and may even cause symptoms such as headaches. >>>More