What is the standard size of the dance bar

The size standard of the dance bar is that there are two standards: a large base and a small base; The details are as follows:

Large base of the handlebar: weight 25 kg; The column is 60 seamless electroplated steel pipe electroplating treatment, and there are 35 solid round steel as lifting rods, with bumping bead lifting and double lock locking. Chassis 45cm, surface sprayed with plastic.

The lifting height of the base is 800mm to 1100mm, and the lifting height is with bumping beads.

Small movable base: weight, galvanized finish. The lifting height of the base is 800mm to 1100mm, and the latch type is adjusted. The bar is made of cm in diameter and is made of PE or ash with manganese steel diameter and elastic for use by children and adults.

It should be an adult who opens his leg at a height of 90 degrees, and if it is wide, he should be able to put his foot down.

The height is around 1 meter to meter.

Half a meter from the wall is enough.

Dance tutorials are generally available in bookstores where you can buy discs, and you can go to the store where the doors and windows are decorated.

1.5 meters of home dance bar is enough,Generally, families have limited venues for practicing dance, and the number of people who practice dance is also very small, most of them have only one person, so families use dance poles, and choose short shifting poles.

The mobile dance bar can be used casually, and is suitable for temporary venues, such as stages, temporary training, etc., and the height of the bar can be adjusted by lifting the bar. The material of the dance shed collapse handle is better to choose ash, because the material of ash, is good and durable.

Key points for choosing a dance bar.

1. The dance bar should choose PE bar or ash handlebar, which is durable.

2. Choose stainless steel dance handlebars, no fading or aging, safety is the most important.

3. Don't be bent on cheapness.

4. Try to choose a regular company with good reputation and full qualifications to buy the handle.

The standard adjustable height of the dance bar is 40cm, and the average height is 80 120cm.

At present, the general floor-mounted fixed dance bar lifting rod is generally an electroplated steel pipe, with a diameter of about 3 2cm, the base is made of cast iron, with a diameter of about 4 8cm, and the adjustment height is about 70cm and 120cm (it is normal to have an error interval of 2cm).

The wall-mounted dance pole is made of the same material and diameter as the ground-mounted fixed dance pole, and the main flange is close to the ground, the adjustment height (including the rod) is about 67cm 102cm (there is a 2cm error interval), and the distance from the pole to the wall is about 30cm.

The standard for dance handlebars.

Movable handlebar.

As an important equipment for dance practitioners' handlebar training, the pole must first have strong bearing capacity and moderate elasticity, too soft or too hard will have different degrees of impact on dance training, and after a long time, it will also cause damage to the user's body parts in contact with the handlebar, and there is also a risk to safety. As the most professional dance equipment manufacturer in China, we have the obligation to produce professional dance poles for the majority of dancers.

There is no strict standard for the production of the pole, after consulting with expert teachers engaged in dance education and groups who use dance poles in various fields, combined with the technical requirements of dance and physical training, through our market research, we finally selected ash wood as a high-quality material for the production of dance poles.

Combined with practical use, the dance bar can be divided into two types: mobile and fixed. The advantage of the mobile handle is that the actual use is flexible and convenient, not constrained by the site, but the stability is worse than that of the fixed handle, the stability of the fixed handle is good, the safety is strong, but limited by the installation site, the wall or the ground must be solid, otherwise it cannot be installed, even if it is installed, it will fall off, and there are potential safety hazards at the same time.

Wall-mounted handlebars.

In order to increase stability, the mobile base is made of pure cast iron, and at the same time, according to the requirements of different dance training, the bar base is designed with a height adjustment device, the column is 60 electroplated steel pipes, there are 35 solid round steel as lifting rods, the chassis is 430, and the surface is sprayed with plastic. The lifting height of the base is 800 to 1100, with bumper lifting and double lock fast, the lifting operation is simple and flexible. The surface is treated with high electrostatic spraying or bright plating.

The fixed handle bracket column is 60 steel pipes, and there are 35 solid round steel as lifting rods, and the lifting height is 800 to 1100, and the surface is sprayed with plastic. Lifting with bumper beads.

Floor-mounted handlebar.

Now the dance rods sold on the market are uneven in terms of material and quality, and the difference is huge, but they are basically the same from the description of the product, which has caused great confusion to consumers. If you think about it carefully, can there be such a big difference between the same material, process and structure? One point of quality, one part of the most simple truth, I believe consumers still understand.

Don't be bent on cheap, there is a saying "cheap is not good, good goods are not cheap", try to choose a good reputation, full qualification of the regular company to buy ** is not the first, safety is the most important, it is best to go to the manufacturer for on-the-spot inspections in ordering.

Before the dance floor was not used for dancing, people generally chose wooden floors to dance, and in some places even performed directly on concrete floors or floor tiles. However, the material of the wooden floor and floor tiles is too hard, and it is easy to slip and get injured when dancing, which can easily cause fatigue of the dancers. The dance floor glue is made of high-quality PVC resin as raw material, the dance floor rubber is moderately soft and hard, and the special surface treatment makes the dance floor rubber more non-slip and soft foot feel makes your dance more beautiful.

The dance floor glue is easy to install, and the mobile installation can facilitate the movement of the dance floor glue. Added some temporary stage requirements for ground costs. Dance floor glue can be customized according to the customer's requirements, color, size.

Some people have personalized requirements for color, and the dancing floor glue just meets everyone's needs. Customized products according to the size of the site reduce waste and bring cost savings to customers.

The first of the dancing floor glue is more reasonable and more cost-effective. Professional wooden flooring for dancing is expensive, generally a few hundred yuan, and a good one may cost thousands of yuan. The dancing floor glue ** is generally more than 100 yuan, and the thinner ones are cheaper.

However, it has a very long service life, which can reach 10 --- 20 years. Super cost-effective, become your ideal choice.

Youshang dance floor glue can provide professional dance floor glue products and installation services for major stages, dance classrooms, dance academies, dance training classrooms and other stages. In Beijing, Tianjin, Shanghai and other major cities across the country have done many engineering cases, and the products have gone to various provinces and cities across the country. The National Centre for the Performing Arts, CCTV7, ** Dance Academy, and the University's School of Dance Specialties all have successful cases of Youshang Dance Floor Glue.

The floor-mounted fixed dance bar lifting rod is generally an electroplated steel pipe, with a diameter of about about one, the base is made of cast iron, with a diameter of about one, and an adjustment height of about 70cm-120cm (it is normal to have an error interval of 2cm).

The wall-mounted dance bar lifting rod and the base material and diameter are the same as the floor-mounted fixed dance bar, the main flange is close to the ground, the adjustment height (including the rod) is about 67cm-102cm (there is a 2cm error range), and the distance from the pole to the wall is about 30cm.

Professional dance studios have sock rulers and several different height bars. However, the height of the bar is generally a little below the shoulder. For children in kindergarten, it is generally about about a meter.

1.Mobile dance handlebar: It can be used casually, suitable for temporary venues, such as stages, temporary training, etc., and the height of the bar can be adjusted by lifting the pole to tell the height of the handlebar.

2.Fixed dance bar: fixed on the ground, the ground requirements are not high, as long as it can be firmly fixed, the height of the bar can be adjusted by lifting the bar.

3.Wall-mounted dance bar: If it is fixed on the wall, the height of the bar can be adjusted by lifting the bar.

Between 1m---1m2 You can buy a bar that can be adjusted in height, so it is suitable for children of all ages.

Dance bar Product specifications: 2m, dance bar, the diameter of the bar is cm, ash material, manganese steel with a diameter inside, elastic for children and adults to make 800 to 1200. Product Name:

Arm-mounted dance bar bracket Product material: wall-mounted lifting dance bar bracket, the surface is white for spraying plastic treatment The column is made of non-bladed steel pipe, electroplating treatment for the lifting column, and other specifications can be customized according to customer requirements. Product Name:

Mobile Dance Handle Large Base Product Specifications: Lifting Height: 80cm-110cm Product Description:

Handle rod base: weight 25 kg, column for 60 electroplated steel pipe, 35 solid round steel as lifting rod, chassis 450, surface spray treatment. The base lifts from 800 to 1200 with bumper lifts.

Product Name: Mobile Dance Lever Small Base Product Specifications: 80cm-120cm Lifting Height, Product Description:

The chassis diameter is 37cm, weight, full electroplating treatment, smooth surface, double lock design, the lifting height of the base is made of solid round steel, with bumping ball lifting, double lock solid, Product Name: Product Description: Floor lifting dance bar bracket, the surface is white for the spray plastic treatment column is made of non-front steel pipe, the electroplating treatment lifting column is made of solid round steel, with the ball lifting, and the double lock is solid.

Surface spraying. The base lift height is 800 to 1200.

Wall-mounted dance handlebar: The installation flange is 30cm from the ground

When lowering the waist, the bar is just under the waist, which is convenient for throwing the waist.