How to maintain the turf and how to maintain the fur?

1.Weeding and mowingFor lawns, weeds need to be removed regularly. Spring is generally the peak season for lawn growth, and it is also the season when weeds are abundant.

Weeds should be pulled out so as not to affect lawn growth. If weeds grow too much, they can rob the lawn of its moisture and nutrients, causing the lawn to stop growing, with very serious consequences. In addition, it is not okay for the lawn to grow too fast, it will affect the appearance and easily breed diseases and pests, so it is necessary to mow regularly to keep the lawn flat.

2.Loose soil lawns used for ventilation will have dense root systems that become intertwined at the beginning of flat growth, so that low-lying areas are prone to water accumulation and root rot. Moreover, if the lawn is trampled too much, the soil will become compact, affecting root respiration and drainage, so it is necessary to loosen the lawn.

A common method is to punch holes in the lawn with a hole punch to keep the soil ventilated and ventilated. The punching depth is about four centimeters, and the edge can be trimmed after punching. 3.

Fertilizer and water and fertilizer management are also important for lawns. To promote lawn tillering.

For growth, some compound fertilizer should be applied.

It can better promote the tillering of plants, improve resistance, and make the lawn grow better. In general, more fertilization should be applied during the growing season. After fertilization, it should be watered, and there should be enough moisture during the growing period of the lawn.

When the lawn turns green in the spring, there should be enough moisture for the lawn to grow quickly. Water thoroughly every time you water so that the root system can take deep roots. Water more often in the summer.

1. Weeding and pruningFor the lawn is the need to regularly remove weeds, spring is generally the lawn growth season, but also the season of weeds luxuriant, to pull out the weeds, to prevent it from affecting the growth of the lawn, if the weeds grow too much, will rob the lawn of water and nutrients, so that the lawn to stop growing, the consequences are very serious. In addition, it is not okay for the lawn to grow too fast, it will affect the appearance, and it is also easy to breed diseases and pests, so it is necessary to mow regularly to maintain the flatness of the lawn.

2. Loosen soil and ventilateAt the beginning of the growth of the lawn, the root system will be relatively dense and intertwined, so that it is easy to accumulate water in low-lying areas, resulting in root rot, and if the lawn is trampled too much, the soil will become compact, affecting root breathing and drainage, so the lawn needs to be loosened. A common method is to use a hole punch to punch the lawn to keep the soil ventilated and breathable, and the depth of the hole is about four centimeters, and the hole can be mowed after punching.

3. Fertilize and waterWater and fertilizer management is also very important for the lawn, in order to promote the tillering growth of the lawn, it is necessary to apply some compound fertilizer, which can better promote the tillering of plants, improve resistance, and make the lawn grow better. Watering should be carried out after fertilization, and there needs to be sufficient water during the lawn growth period, and there must be enough water to make the lawn grow quickly in the spring, and each watering should be thoroughly watered to let the root system deepen, and the number of watering times in summer should be more.

1. Soil, leveling soil, loose and breathable, poor or cohesive soil for improvement, using organic fertilizer or peaty soil to improve the soil, with soil disinfection, sterilization and insecticide, to create a good environment for the roots.

2. After paving, it must be compacted, closely combined with the underlying soil, and watered after compaction to ensure thorough watering. It can also be flooded once before the paving to effectively ensure that the lower soil moisture is sufficient.

3. Use Helindao rooting liquid + root rot + polypeptide blue to water the roots to promote the rapid rooting of the root system, supplement nutrition, and quickly restore growth. Timely prevention and control of underground pests if there are underground pests.

4. Pay attention to the prevention of brown spot and wilt in high temperature in summer, and spray with Xiuze, photosynthesis, ground color, etc.

The core of turf laying is to solve the soil problem, the lawn takes root relatively quickly, as long as the soil is suitable, there will generally be no major problems in the later stage. Therefore, it is important to pay attention to the problem of soil, and of course, watering and other links must also be in place.

If conditions permit, it is recommended to sow seeds directly, sowing with grass seeds such as Qingsi or Lanjing No. 3, so that the seedlings can adapt to the environment, grow strongly, resist stress, and the probability of death will be reduced a lot. In short, lawn maintenance work needs to be in place in every link, so as to achieve fine maintenance, in order to ensure the normal growth of lawn.

Watering. The lawn should be watered continuously, especially in dry periods, such as April-May and September-October in the north. In the early days of the lawn, pay attention to watering.

Weeding. When the lawn is not yet full, weed control is an extremely important task. Weeding should adhere to the principle of removing small and clean weeds. If weeds grow up and then removed, it will increase the difficulty of weeding, and it is very harmful, often making the lawn unable to grow.

Trim. After the lawn is formed, it should be mowed frequently to make it neat, flat and beautiful. In the peak growing season, the number of pruning should be increased, as much as 2-3 times in two weeks, but the amount of grass cut should not be too much each time, not more than half of the grass height.

Pay attention to the height. Pruning when the grass is too high is not only difficult to mow, but also minimizes the loss of grass. Mowing the lawn can increase the density of the grass. It can prolong the green period of the grass and keep the bright green color of the grass.

Fertilize. 10-15 kg of ammonium sulfate and 3-5 kg of urea per mu can be mixed with fine wet soil and sprinkled.

Poor air permeability. Holes can be drilled in the lawn with a hole digger, which on the one hand improves the soil and allows the grass to grow along the new holes.

Care and care of fur:

A precious piece of fur needs proper care and will always be new, with the following points to be taken care of:

1. Use a wide-shouldered coat rack to hang your fur.

2. Do not use tape covers, cover mink coats, it is best to use silk covers, cotton belt breathable covers, and cotton clothes with breathable clothes covers are also very good.

3. If the fur is wet with rain or frost and snow, use a dry towel to wipe it first. Blot the water dry, then hang it in a cool and ventilated place, air dry naturally, do not heat and bake or blow in the sun, after the fur is dry, gently rub the leather board to avoid the skin board from becoming hard.

4. Do not modify or use a general comb to brush the bristles without authorization, but use a special comb for combing fur.

5. Do not use ordinary methods to clean fur, should be regularly cleaned in a professional fur shop to keep it clean and beautiful, generally once every two years.

6. Do not spray perfume and touch cosmetics on the fur, and do not put mothballs and flavors in the dust cover, because the fur has been treated with insect and moth prevention, so as not to produce chemical reactions and affect the quality of the fur.

7. Do not wear any jewelry on fur.

8. Avoid carrying leather bags, so as not to rub the backpack straps with the fur and cause damage.

In summer, it is best to keep the fur in the refrigerator to avoid high temperatures, humidity and insects and ants.

The enemies of heat and humidity fur are sunlight and moisture. Therefore, when placing fur, avoid direct sunlight and hot and humid places. It is best to keep the room temperature at 15 degrees Celsius and place a moisture-proof pipe.

There is a way to hang it. Use hangers with shoulder pads to hang fur, and do not use wire hangers to avoid damage or deformation of the fur.

Breathe well. People have to breathe, and so does fur. When storing fur, make sure that it is highly breathable, do not use plastic bags, and use a wide cloth bag to cover the fur if necessary to keep out the dust.

Avoid chemicals.

Try not to wear perfume or hairspray when wearing fur, as the chemicals in these products contain alcohol that can dry out the fur.

To buy something, you need to buy a bottle of oil, it's very fast, it's super convenient.

Reasonable pruning Reasonable water and fertilizer, mowing height needs to be controlled, do not mow too much at a time, mow off the total height of the lawn 3 1 each time, gradual pruning, generally keep it in 1-2 or so is more beautiful, you can also leave a high lawn according to your own needs.

How much is a square meter of green natural lawn**.

1.Manila Lawn: $5 12

2.Green grass lawn: 6 18 yuan

3.Scissors lawn: 45 80 yuan

4.Dogtooth root lawn: 7 11 yuan

5.Four seasons green lawn 6 12 yuan

6.Ryegrass lawn: 8 $11

7.Bermuda lawn: $6 15

8.Knotweed lawn: 12 20 yuan

9.Tall fescue ryegrass early maturing grass mixed lawn: 6 13 yuan

The cost of laying is about 3 5 yuan per square meter, including unloading, transfer, paving, watering, compaction, etc., and the land preparation depends on the terrain in the calculation.

For example, Bermuda's average price in the fall of 2020 is 1 square meter, the highest price in the spring of 2021 is 17 yuan per square meter, and in the autumn and winter of 2021, Bermuda** has returned to 7 8 yuan per square meter.

So more prepared **, please consult the lawn base.

1.First of all, choose the right variety according to the region.

2.Calculate the amount you need, considering the irregular terrain of the turf, it is recommended to calculate carefully and purchase in sufficient quantities.

3.Choose the nearest turf base to buy, and save a lot on shipping costs.

4.Consult more and inquire more, choose the most moderate, don't buy the lowest price!!

How to choose a lawn species.

Cool-season lawns.

Warm-season lawn.

Mixed lawn.

Lawns should be selected according to the climate and environment, there is no perfect, and whether the evergreen period is the longest or not depends on the local climate, not the variety.

Please click Enter a description.

Please click Enter a description.

Fur garments should be kept in a cool, dry environment, and should not be exposed to water or direct sunlight, as damp fur is easy to shed. Before collecting the fur you have worn, brush it with a suitable brush in the direction of the bristles to avoid dander and insects. After the rainy season, the fur must be covered with a layer of cloth to avoid direct sunlight, and then the temperature of the fur should return to normal temperature before storing it.

Use a wide-shouldered coat rack to hang your favorite fur.

Do not use plastic bag covers to cover your mink coat, preferably with silk covers.

If the fur is wet with rain or frost or snow, it should be hung in a cool place to dry naturally, and should not be heated or exposed to the sun.

Do not modify or brush the bristles with a normal comb.

Do not wash your fur in the usual way, but visit the fur shop regularly to keep it clean and beautiful.

Never allow perfumes, cosmetics, hair sprays, etc. to come into contact with fur.

Never buckle anything on the fur.

Avoid carrying a leather bag to avoid damage caused by the strap of the backpack rubbing against the fur.

In summer, it is best to keep the fur in the refrigerator to avoid high temperatures, humidity and insects and ants.

Mink fur cleaning: mix magnesium oxide powder and talcum powder in a ratio of 1:1.

After mixing the cleaning materials, lay the fur flat and wipe the stain with a sponge or cotton swab dipped in the prepared detergent, if the stain is stubborn, then wipe it several times. Then let it sit for a day, blow off the detergent with a hair dryer, and finally it is recommended to wear the fur on the model.

Sheepskin ordinary fur cleaning: 95% alcohol: 200-250ml with talcum powder:

500-1000g mix. Spray the mixed detergent in an atomized watering can, then wipe it with a sponge or cotton swab, and finally wear it on the model, using a thin-toothed comb to dredge the quilt in the forward direction.

White plush yellowing treatment: hydrogen peroxide mixed with water in a ratio of 1:10. The processing method is basically the same as the above two.

Rabbit fur cleaning: Rabbit fur is more delicate, because the fiber surface of rabbit fur is composed of many scales, once stirred in the washing machine, it will make the rabbit fur felt, destroying the suppleness and beauty of rabbit fur. Therefore, it is recommended to take the rabbit fur to dry cleaning or send it to a professional after-sales service for cleaning, although the rabbit fur is not expensive, but it is necessary to maintain it well after buying.

We all know that fur should be well maintained, and when cleaning, it is not just a casual wash, you need to use a special cleaning method, but you don't want to spend too much time on cleaning, so today I will introduce the simplest fur cleaning method, saving time and effort.

1. The sheepskin fur needs to be softened with alcohol, and then used a sponge dipped in powder to apply it to the dirty place, wipe it, and then blow the hair clean with an air spray gun.

2. Mink fur only needs to be wiped on a dirty place with a sponge dipped in powder, then wiped on it, and then blown clean and dried with an air spray gun.

3. If the fur simply gets some dust and turns yellow, you only need to spray hydrogen peroxide and water according to the 1:1 mixture, then wipe it, and then blow it clean and dry it with an air spray gun.

4. If the fur hair becomes dull, you can mix the white vinegar and water according to 1:1, and then spray it on the fur, spray it every 5 minutes, spray it 3-5 times, and then wait for 15 minutes, wipe the fur hair with a dry sponge, and then dry it. 5. Note:

When the fur is dry, you can use a brush to comb the hairs on the fur to make it look more natural.

How to care for fur.

1. Prevent dampness and heat: The great enemy of fur is sunlight and moisture. Therefore, when storing and maintaining fur, it is necessary to avoid direct sunlight and hot and humid places.

2. Cool hanging method: When hanging fur in the cold, use a hanger with shoulder pads to cool the fur, and do not use a steel wire hanger to avoid damage or deformation of the fur.

3. Keep breathable: When storing and maintaining fur, ensure high air permeability, do not use plastic bags, and use wide cloth bags to cover fur when necessary to separate dust.

4. Avoid chemicals: Try not to spray perfume or hairspray when wearing and maintaining fur, as the chemicals in these products contain alcohol, which can dry out the fur.