How do you turn on Samsung phone S6 when it freezes?

Method 1: First of all, press and hold the power button for more than 10 seconds, and it will restart.

Method 2: If the Samsung S6 is dead and cannot do anything, the user can press and hold [Volume-Key (Down)] + Home Button + [Power Button] at the same time, and press and hold it for about 5s or so, and the Samsung S6 will automatically force restart.

On March 2, 2015, Beijing time (March 1, 2015 Barcelona time), Samsung released the Samsung Galaxy S6 in Barcelona and appeared at the MWC2015 product launch. The Galaxy S6 is covered in glass at the front and back, and has curved metal bezels on the sides. Equipped with its own Exynos 7420 octa-core 64-bit processor, 14nm process, 3GB of running memory upgraded LPDDR4, the overall configuration is also top-of-the-line.

Cheetah has announced a partnership with Samsung, which will include the cleaning function provided by Cheetah Cleaner Master in this flagship phone. For the first time at the system level, it is equipped with services such as visual IVR voice menus provided by **Bang.

1. The boot line is abnormal: use an external power supply to supply power to the mobile phone, use the electric meter to detect whether the indication has changed, if there is no change, it is likely that the boot line is broken or the boot button is not in good contact.

2. The power supply circuit of the battery is abnormal: use the external interface to supply power to the mobile phone, see if it returns to normal when it is turned on, if it is normal, it is determined that the power supply circuit of the mobile phone is abnormal.

3. The IC of the mobile phone power supply is abnormal: test the test point of the peripheral circuit of the power supply IC according to the circuit schematic diagram to see whether the test value is normal.

4. The system clock and reset of the mobile phone are abnormal: you can use the dual total oscilloscope to detect the CPU power supply of the mobile phone to check whether the waveform in the reset is correct.

5. Problems with logic circuits: that is, faults in the circuit version of mobile phones, which can generally be solved by repair welding.

6. Software conflict: The installed software does not match the system of the mobile phone, which may also cause the mobile phone to fail to boot, you can connect the mobile phone to the computer to delete the program.

7. If it is a copycat mobile phone, then I estimate that it can't be turned on because the chip inside is burned, or some of the small parts inside are loose, but this situation will only appear if you drop it, the chip burns may be because you charge it for too long, burn the chip, if the battery has electricity, that is these aspects, if it is a brand-name mobile phone, such as Nokia, Motorola. These situations are rare, unless it is artificial, if it is a brand-name smartphone, and it is not used improperly, it is a software problem, it may be a system crash, or because of the mobile phone poisoning caused by software damage, generally this can only go to the maintenance office, however, I think the biggest possibility is caused by static electricity, it is recommended that you do not open the blind repair, or go to the maintenance office!

We recommend that you do the following:

1.If it can't be turned off, it is recommended to press and hold the power button for 8-10 seconds to restart the machine to try, shut down, restart the machine to try, if it still can't be turned off, you need to send your phone to the service center for processing, if it can be turned off, you can continue to operate the following steps.

2.Test the third-party software that was operated before the crash to rule out the third-party software that is incompatible with the phone and cause the crash.

3.Back up your phone's important data and restore it to factory settings.

If the fault persists, it is recommended to bring the machine, purchase invoice, and warranty card to the nearest Samsung service center for testing and repair.