HP probook6550b wifi how to turn on

1. This model is with a wireless network card.

As long as you install the driver of the wireless card.

Turn on the switch of the wireless network card to connect to wifi with the wireless network card.

2. Then search for the wireless signal, click the name of the searched wireless signal, enter the correct connection password, click OK, if the password is correct, the connection will be successful and you can connect to the wifi.

3. If you install the driver of the wireless network card and turn on the switch of the wireless network card, but it cannot be used normally, it is recommended to contact the official after-sales service center and the engineer will help check and deal with it.

HP 5820 printer connection wifi is as follows. 1. On the premise of ensuring that there is printer sharing, open Online Neighbor or Control Panel, select Printer and Fax, or select Add Printer from Start. After popping up the Add dialog box, select the option of the network printer, then proceed to the next step, select Browse Printers, select the name of the shared printer in the list of shared printers, and after confirming the settings, you can choose it as the default printer, so that it is connected, and you can print directly through the wireless network.

Select Connect a new printer. 5.The connection mode is wireless.

6.The printer is connected to a wireless network. 7.

Select Yes, Next. 8.The wireless printer is successfully connected.

Summary. 1. Open the "Start" option of your computer, find the "Settings" option after entering the start menu and click to enter;

2. Then find the "Device" option in the "Settings" interface and click to enter;

3. Then find the "Printers & Scanners" option on this page and click to enter;

4. Finally, just select "Add Printer or Scanner" on this page, and then set the connection method to wireless connection, so that the printer can be connected to the wireless network.

How to connect the HP 5820 printer to wifi

Hello, we are happy to answer for you and are helping you with relevant information. Please wait two minutes.

Dear, the HP 5820 printer can be connected to wifi like this".

1. Open the "Start" option of your computer, find the "Settings" option after entering the start menu and click to enter; 2. Then find the "Device" option in the "Settings" interface and click to enter; 3. Then find the "Printers & Scanners" option on this page and click to enter; 4. Finally, just select "Add Printer or Scanner" on this page, and then set the connection method to wireless connection, so that the printer can be connected to the wireless network.

5. Back up the data and try to restore the system to the previous restore point: Open Start - All Programs - Accessories - System Tools - System Restore - Select the time point when the system can be used normally before.

6. Restore the system to the factory default state.

Using the HP pre-installed operating system, you can try to solve the problem by restoring the system with the shortcut key "F11" and restoring the computer to its factory state.

Note: HP recommends backing up important files or data before doing a system restore.

7. Reinstall the operating system.

If the computer has installed the operating system on its own, and the fault persists after the above operations, you can try to reinstall it.

Note: HP recommends not using Ghost's installation disc to reinstall the operating system. The security, stability, and compatibility of these operating systems are not guaranteed, and it is recommended to use the original system to install them step by step.

1. The method of turning on the wireless switch is not necessarily the same for different notebook models. Some laptops use the F12 key (or FN+F12 key combination) to turn on the wireless switch, and some models have a "separate wireless switch button" to turn on the wireless switch. When the wireless switch is on, the wireless indicator is generally white or blue.

2. It is recommended that you can provide "the specific model of this machine", and then we will inquire about the wireless switch method for you to deal with.

There is a button in the upper right corner of the keyboard, or it is turned on in the settings.

There are a few ways that a laptop can turn off wifi:

1. Click the wireless network icon in the lower right corner of the screen with the right mouse button, and select Disconnect on the pop-up menu, the wireless network icon looks like the red circle in the figure below

2. Use a physical wireless switch to turn off the wireless network card, laptops generally have a physical wireless switch, usually on the side of the chassis, use this switch to turn off the wireless network card directly, and the wifi will naturally be disconnected, as shown in the following figure:

Different laptops have different shapes and positions of physical switches, and you don't necessarily have to find the same shape, you need to look carefully.

3. Turn off the wireless network card with a combination key switch, the current laptop may not have a physical wireless switch, but there must be a combination key switch, it may be FN+F2, it may be FN+F5, or it may be FN+F9, the specific situation can be determined according to the wireless icon on the keycap, as shown in the following figure:

4. The last way is to shut down the computer, the operating system is out, and the wireless network is naturally disconnected.

Turn on the Wi-Fi switch, find the Wi-Fi near you, and enter the Wi-Fi password to access the Internet.

Note: During the warranty period, hardware failures that are not caused by human beings can be repaired free of charge; If your machine is out of warranty**, you can contact your local HP Care Pack Service Center directly for a consultation.

We hope you find the above reply helpful.