Why is my Rolex watch slowing down unconsciously? Without warning.

Hello, the general watch slows down by the following three reasons, I hope to help you.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when they are slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

Although everyone knows that there is no watch with 0 error, what is the reason for wearing the watch for a period of time and getting slower and slower?

First of all, we must understand that the calculation of the watch error is cumulative, for example, a day is about 20 seconds slower, of course, you can't see anything after a few days, and naturally you won't adjust the time, half a month is 5 minutes, and a month is 10 minutes. This gives many people the illusion that they are going slower and slower. The error criterion is:

30 seconds day.

1), insufficient power (2), the movement is dirty, poor lubrication, too much sludge (3), the weather is cold and slows down (4), the watch is slower and slower due to walking and stopping (5), the water is not thoroughly treated (6), the watch is magnetized The above points are not difficult to find that under normal circumstances, slowing down does not mean that the watch is broken, and it is closely related to our wearing environment. First of all, we need to ensure that the amount of exercise is enough, and wear it for more than 8 hours a day. If not, it is recommended to go to a professional watch for repair and testing, and accurately guide the cause of the watch slowing down before it can be dealt with.

Why is my Rolex slowing down unnoticed? If there is no warning, it may also be, the watch may be a long time, dust will appear in it, it will go slowly, or the run-in time is long, and some parts are loose, and he will also be slow.

The watch will slow down unconsciously, it may be that the battery inside is reduced after a long time, you can change a battery to see, when the battery is sufficient, generally not.

It may be the reason that the machine has been used for a long time and is seriously worn, so it is recommended that you wipe the oil.

Hello, your Rolex watch is slowing down unconsciously, so if you are this, you can take it to the store where you bought Rolex to consult, and see if there is a problem?

Maybe there's something wrong with your oil, maybe it's blocked, or maybe there's less mechanical oil in it, right?

Rolex watches are very high-end watches, so he doesn't rely on batteries, you have to shake his hand every day, and he will automatically wind it.

Well, if you turn off your Rolex watch, it means that you don't know it, and it's normal, but there are a lot of mice like this.

Why is my Rolex slowing down unnoticed? Without warning. Rolex watches.

It is a particularly expensive watch. Before you know it, it's slowing down. You have to go to the watch store.

Our master will tell you what to do? He'll take care of it for you.

Hello friend, first of all, make sure that it is **, and then go to the after-sales service to check it.

Why does my Rolex watch slow down unconsciously, without warning, I think it must be the battery in it.

Reasons and how to deal with the slowness of the watch:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the watch to a special maintenance point to check the power or replace the battery.

3. Having been beaten or hit by a wild attack. The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to a special repair shop for testing.

4. Maintenance is required. Lack of oil or wear and tear of internal parts of the movement can cause time problems, which require maintenance and need to be sent to a designated repair point for maintenance.

Here's how to deal with a Rolex watch slowing down:1. The battery is broken and needs to be replaced with a new one;

2. The circuit board needs to be replaced;

3. When the coil is broken, the multimeter can detect it, and the common demand changes again;

4. The watch is magnetic, just go to the repair shop to demagnetize;

If the watch you just bought is fast, then it is likely to be magnetized. Because after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short loop, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will aggravate its radial movement, resulting in fast walking.

Here should be sent to a professional repair shop with a professional demagnetizer to demagnetize it, do not be greedy to go to the roadside stall for maintenance, so as not to repair the more bad, in addition to the watch demagnetization does not need to disassemble the watch, the cost is generally not high.

If the test result is still fast after demagnetization, it may be that the pendulum frequency of the mechanical watch has become larger, and the general watch relies on the hairspring to retract and control the swing, which is the basic principle of adjusting the speed and slowness. Make the hairspring available for retraction shorter, the swing will be smaller, the frequency of the swing will be larger, and the watch will be faster. If you need to open the lid for comparison, it is recommended to send it to the store for processing, and some complex watches also need to be sent back to the production factory by the store for processing.