What should I do if the web page is 360 locked, and what should I do if the computer browser is 360

Plan 1 [New P].

Note [Original]:

1 In safe mode, the effect is even better!

2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

3.It is not antivirus, and the following methods can be used directly. If it doesn't work, use a high-quality antivirus (e.g. Kaspersky) in safe mode to kill it, and it's best to use 360 Security Guard as well.

Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. ）

You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, and select "Home Repair", "System Repair" and "IE Repair" as a tick (you can also select all.) At least select "System Repair"), and then click "One-click Repair".

Too lazy to install it, just use the 360 first aid kit) .

Then use the 360 first aid kit. [Follow the steps: "Start First Aid" first; After scanning, if a Trojan horse appears, click "Isolation"; Then click "Repair" (you can select all of them to Fix Now".

Next, click on "Recover Lost DLL Files", add the missing DLL files that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not. When you're done, you should restart.

Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

You can also consider using the Kingsoft First Aid Kit [After point scanning, if there are items that can be repaired, after selecting all, point repair can be done. 】

Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

2.When the effect is not good, look at the three points in "Attention". 3.

After that, if the effect is not good, you can also consider system restoration (choose a restore point).

Summary. 1.Turn on 360 Security Guard:

3.Among the many added features, find "360 Web Shield" and click to enter:

4.Entering the 360 Network Shield, we see the "Lock IE Home Page Settings" at the bottom right, and see that the home address is the navigation home page of 360, if we don't like it and need to replace it, click "Modify".

5.Pop up the settings interface to modify the home page, it is obvious that we see that the input box is gray and cannot be operated, because there is a "lock" in front, which means that the home page has been locked, so the home page cannot be modified because of this, we need to click the "unlock" below:

6.At this time, the program will pop up a warning prompt: "If unlocked, it will bring risks, it may lead to the IE homepage being tampered with by Trojans, whether it is sure to be unlocked", here we click "OK", because if it is not unlocked, we will not be able to modify other homepages:

What to do if your computer browser is 360 locked.

Hello,This means that the home page is a 360 page,It's the first page you see after the browser opens This is the default setting。

Secure Ha access is not open**.

There is a lock and! Number.

Can't other web pages be opened?

Yes. Whether it is normal or not.

1.Open 360 Security Guard: 2

4.Entering the 360 Net Shield, we see the "Lock IE Home Page Settings" at the bottom right, and see that the home address is the navigation home page of 360, if we don't like it and need to change it, click "Modify"5Pop up the settings interface to modify the home page, it is obvious that we see that the input box is gray and cannot be operated, because there is a "lock" in front, which means that the home page has been locked, so the home page cannot be modified because of this, we need to click the "unlock" below:

6.At this time, the program will pop up a warning prompt: "If unlocked, it will bring risks, which may lead to the IE homepage being tampered with by Trojans, whether it is sure to be unlocked", here we click "OK", because if it is not unlocked, we will not be able to modify other tomato homepages:

This is the installation of 360 related software will lock the home page, ha, the web page can not be opened, it is definitely not normal.

If the webpage still can't be opened, you can click on the 360 toolbox to fix the network disconnection.

Win7 system is installed with 360 security guard,It is a security antivirus software,360 security guard will automatically turn on the browser home page lock function,Although it can prevent malware from tampering with the home page,But the user himself has no way to set the home page。 So how to solve the problem that the 360 security guard under the win7 system locks the browser mainly? Next, I will share with you how to solve this problem.

Recommended:

The solution is as follows:

1. Open 360 Security Guard and click "Protection Center" in the lower left corner of the interface;

2. Click "View Status" under Browser Protection on the Protection Center interface, and find and click the setting button after "Internet Home Page Protection".

3. Turn off the browser homepage protection function here, and you can also select and lock the default browser below;

4. After unlocking the home page of the browser, you can open the browser and set the home page in the Internet options;

5. Or we can also click "Modify Homepage", and then click "Custom" in the homepage settings, and then enter the homepage you want, and then turn on the homepage protection function to prevent others from maliciously tampering with, and you can use the homepage you want.

The above tutorial content is the solution to the main lock of the browser under the win7 system360 security guard,After a few simple steps to set,360Security guard will not lock the browser。

1、First of all, we can view the tools of the 360 browser - the default is checked as the default browser 2、Then at this version we select the tool - option,Not the right Internet option,Because it will be blocked when the IE browser is set by default,All we enter here and click to modify the home page。

3. Then we choose the default browser, change the original 360 to IE and then lock it. It is possible to set a lock on the 360 browser and it works.

4. Now we are looking at the tick set as the default browser in the tool, or how to set it up can't be set up, only by removing this tick is easy to operate.

Open the 360 Guardian software, click the [Security Protection] option, click [View Status] under the [Browser Protection] option, click the gear icon behind the [Internet Home Page Protection] option, and click the button behind the [Lock IE Home Page To] option to unlock the home page.

1. Turn on the 360 security guard, and click "Security Protection Center Source".

2. In the box of the Security Protection Center, "Browser Protection" -- View Status -- Internet Home Page Protection

3. In the pop-up browser protection settings, lock the home page of the browser as: 360 security** navigation "cancel", and you can also set IE browser as the default browser.

360 Browser --- Tools --- options --- modify the homepage.

Find the settings item on the 360 browser and unlock it.

In the upper right corner of System Repair, there is the option to lock the IE home page.

[Problem description]:

Cause Analysis]:

The IE homepage is locked; The relevant Group Policy setting is abnormal.

Easy Steps]:

Solution 1: [360 Security Guard] - [System Repair] - [IE Home Page Lock] - Modification.

Solution 2: [Start] - [Run] - Enter [Enter] - [User Configuration] - [Management Template] - [Windows Components] - [Internet].

Explorer – Double-click Disable Change Home Page Settings – Set Enabled and Set Home Page.

Solution]:

Solution 1: Change the IE homepage lock.

Figure 1 Figure 2 Option 2: Change system settings.

Figure 3, Figure 42In the pop-up window, open [User Configuration] - [Management Template] - [Windows Components] - [Internet].

Figure 6 [Problem Description]:

Always show 114 navigation.

Cause Analysis]:

The IE homepage is locked; The relevant Group Policy setting is abnormal.

Easy Steps]:

Solution 1: [360 Security Guard] - [System Repair] - [IE Home Page Lock] - Modification.

Solution 2: [Start] - Enter [Enter] - [User Configuration] - [Management Template] - [Windows Components] - [Internet].

Explorer – Double-click Disable Change Home Page Settings – Set Enabled and Set Home Page.

Solution]:

Solution 1: Update 360 Security Guard.

Figure 1 Figure 2 Option 2: Change system settings.

Figure 32In the pop-up window, open [User Configuration] - [Management Template] - [Windows Components] - [Internet].

360 Security Guard - System Fix, there is IE lock on the right.

Click on 360 Security Guard - then click on System Repair - and then click on the IE home page in the upper right corner to lock and modify.

Browser tools.

There is one option in it.

Homepage Modification Options!!

Open the web page, click on the tool, find the options, then find the basic settings, and then press to lock the home page, and then press the above two clicks to unlock them once, and then you can modify the home page.

2,After entering, directly enter the word home page in the input box,It will automatically pop up something like home page protection,Click to set it。

3. Click the green button in the new interface to unlock it first.

4, and then select the home page that appears or select Customize.

5. Click the orange button after the setting is completed, and it can be locked.

Open 360 Security Guard, System Repair, IE Common Settings, Home Page Lock is: Enter the blank space to lock that web page.

Open 360 Security Guard, click on IE common settings, click on Modify homepage, and modify the homepage that needs to be set.

It's very simple,Open 360 security guard,System repair,IE common settings,Home page lock is:,,If you want to lock that web page, enter it OK。

System repair option, click on it, there is a common IE option in the upper right corner.