The computer uses a mobile phone to access the Internet only and does not receive it!

Set up**.

Try out a few of the new access points below! It's a lot faster! Well worth a try.

Open UC, gglive, QQ, IE are faster than the original] **Server address Port 2992 **Server address Port 54832 **Server address Port 54832 **Server address Port 80 **Server address Port 9201 All ports have been tested and are indeed available! It's all CMWAP!

Modify the server address under the browser, port 80

I know how to get it! I've been in a situation where you open the modem in the control panel and double-click on the one you want to connect to! Point Advanced, the extra initialization command inside, enter like that bunch of letters you found on the Internet! If you don't understand, ask me again!

Depending on what kind of phone you are, install the mobile phone PC kit and connect to the Internet.

Turn off the broadband and turn it back on and on.

Hello! This should be connected to the router, right?

If you only send bytes but do not receive bytes, it means that the port of the router to the Internet is not connected, and you should check the router settings. Above.

This means that you are not connected to the Internet at all. Or that the network cable does not have the ability to connect to the Internet.

In this case, it is necessary to investigate them one by one

1.Whether the crystal head of the network cable is connected or not, the network cable has two pairs of wires, 1, 2 is responsible for transmitting data, 3, 6 is responsible for receiving data, if the crystal head is not connected, it will be like this. Connect the network cable to another computer and try it.

2.If it is available on other computers, then check the network card. This is also the case with poor contact between the crystal head and the network card. Plug it in a few more times, or unplug the network card and try a different slot.

3.If it doesn't work, it depends on whether the network settings, such as IP address, DNS, etc., are set up.

If these areas are normal, then the motherboard or system may be broken.

Check your network cable, that is, from the router to your computer, to see if there is any problem with the network cable, click start-run-cmd, and use the command ping This is the router address) There will be data return for normal routing, otherwise there is none.

Check that there is no problem in the previous step, call the local network operator to ask if it is because of the operator's own problem, after ruling out that it is not the operator, it is recommended to reset the router to factory settings from the new settings and set up the network connection from the new.

To repair your computer IP, right-click on your online neighbor and click Auto-Repair.

Run cmd inside, enter ping to check whether there is a data stream, and if there is, it means that it is successful.

Let's check for Trojans and viruses.

If your home is telecom, don't use broadband in my world.

If it's a network, don't use a broadband connection.

Now broadband is using PPPoE technology, although the physical line is connected to the network card, but the use of virtual dial-up, the network card must be displayed like this.

Only when you click on the virtual NIC can you see that the packets sent and received are normal.

It does not affect the Internet access.

Plug and unplug the network cable, or disable the network card and turn it on, if it doesn't work, see what's wrong with the cat or the switch, generally speaking, it's not your own problem, it's a network problem.

How to test network stability:

Hope it helps.

If your phone is working properly, the problem should be in your computer. It is recommended that you reinstall the NIC driver. If the reinstalled NIC driver does not work, there may be a problem with the NIC or NIC interface. You need to change the network card.

This should be a problem with frequent disconnections, so the fix will sometimes return to normal. But it will also be reversed.

This means that the desktop computer can connect to the router, but the router is not connected to the Internet.

In this case, you should check whether the network settings on the router are correct and whether the network cable of the WLAN port is plugged in. It can also be judged by looking at the router's indicator light.

If there is no problem, then you can call ** to consult the operator to see if the overall network is faulty.

What phone? Is it connected with a cable or Bluetooth?

Do you use a PC suite to dial or use the dial-up software that comes with the system, is the setting true?

The meaning of 692 is a wrong password

The mobile phone is connected to the computer to dial up the Internet without entering the user name and password, as long as the port is set correctly, it is still very simple

You add a clarification point

692？？Wrong password.

I guess you're not right!

The landlord reported the brand and model of the mobile phone, so as to tell you in detail!

Dizzy! Oh heavenly! What system do you have, vista, re-install a few more mobile phones to drive the Internet! It's basically a matter of driver compatibility!