How to make a win7 installation disk can be installed and used on any computer with different config

At present, Microsoft itself does not have the ability to do this!

(1) Set up the optical drive to boot (according to your main version of the BIOS, the interface used is also different, below I will take the Award BIOS settings as an example).

Award BIOS settings.

Reboot, press Del to enter the BIOS, find the Advanced BIOS Features and press Enter to enter the Advanced BIOS Features interface.

Find First Boot Device, turn the page with PGUP or PGDN to change HDD-O to CDROM (Optical Drive Boot), press ESC, press F10, press Y, press Enter, save and exit.

2) Disc installation (take the pure installation judgment as an example).

a. Put the disc into the optical drive, restart it, and see the CD ...... appear at the bottom of the screenWhen the word is written, press any key in time, otherwise the computer will skip the light and start from the hard disk again.

b. Use the arrow keys on the keyboard to select "Install XP system to the first partition of the hard disk" and press Enter.

C, into the copy installation interface, the following is automatic, do not move anything, if you do not want to install some drivers, you can manually select the process is roughly: display the copy progress, restart, automatic installation driver, XP installer, please wait (take a long time, wait patiently), is performing the last task, automatic restart, display "Welcome to use" after entering the desktop.

d、Manually set the display resolution and refresh rate,It's doneIf it's a ghost version of the system,Then use the "Ghost backup restore" software to restore the GHO file。 I don't know where to ask again.

Boot into the system CD, enter the BOIS settings to boot from the optical drive, enter the disc installation interface, first partition the hard disk, and then automatically install OK to complete.

Boot into the CD, press F12 to select Start from the CD-ROM drive, it will automatically run the installation after starting, and you can operate according to the prompts on the installation screen.

Just wait after starting, there are automatic installations.

Hello. Disc mounting system(with disc or burn disc).

1. Boot - insert the disc - press del or other keys to enter the BIOS - set the computer to boot from the disc - F10-Y- enter, the computer will automatically restart into the system installation.

2. After the installation is complete, reboot. Boot - Enter BIOS - Set up the computer to boot from the hard disk - F10 - Y - Enter. After booting up, it is booted from the hard disk.

3. After installing the system, update the driver with Driver Life.

After plugging in the optical drive, the computer sets the optical drive to start, and then it will be installed automatically.