Is it still useful if the airbag gets wet?

Airbags are useless if you don't wear a seatbelt while driving. Although the airbag has a protective effect, it is limited in scope, and only within a certain range and if it hits in a special direction, the airbag can have a protective effect. However, if you don't wear a seat belt, in the event of an impact, the huge impact force will make people fly out entirely, and it is impossible to face the direction of the airbag, so it is likely to hit somewhere else, and the airbag will be useless.

So if you want airbags to work, the first step is to fasten your seatbelt. The relationship between airbags and safety beltsThe role of airbags and safety belts is mutual and indispensable. If the seatbelt is fastened but the airbag does not deploy, the safety of passengers and drivers cannot be guaranteed.

If only the airbag is not fastened, safety cannot be guaranteed. Therefore, if you are riding in a car, it is necessary to fasten your seat belt, and the airbag will automatically deploy in case of danger, but in order to avoid the airbag getting stuck or malfunctioning, it is also necessary to check it regularly. The advantages of airbags are that airbags can actually protect the head and chest more intensively, and when the vehicle is in a collision, if the seat belt is fastened, people will instinctively lean forward.

And because of the collision, the force is generally very large, this force is almost uncontrollable, under the action of the huge impact, even if the seat belt is fastened, the person will hit the steering wheel, but such a force is obviously unbearable. Therefore, if the airbag can be blocked in front, it can reduce the pressure on the chest and head, and can also reduce the damage to the body, which can play a good role in protection. Therefore, airbags are likely to be life-saving in the event of an accident, at least without causing rib fractures or direct "headshots".

Hello, it is generally no longer available, it is recommended that you can drive to the repair shop and let the staff check it for you. If it needs to be replaced, it will be replaced in a timely manner.

This needs to be checked by the repair shop, sometimes it is not necessarily the problem of the airbag itself, it may be the cause of the airbag sensing device.

As long as it doesn't affect the circuit. The circuit is intact and ready to use.

Hello, as long as it doesn't affect the circuit, it's no problem.

To put it simply, it is explosives, there are several kinds of distribution, which is more troublesome, and it is kept secret by various companies, and only a part of the ratio is written on the patent.

I'm not a chemistry student, so I don't know how to make them react, but as long as you detonate the explosives, the explosives inside will detonate and burn out. But the process has to be very careful, we do it with professional fixtures and instruments.

Once the airbag detonator is flooded, it cannot be used.

An airbag detonator is a device that detonates an airbag in a time of crisis, and most of the detonators detonate the airbag through gunpowder. If water enters the detonator, the gunpowder will naturally fail, which will be very dangerous.

After entering the water, the airbag cannot be opened, and it must be replaced, which affects the safety [If the car has a problem, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello car owner. As long as the airbag light is on, the airbag will not work [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

When the car falls into the water, it is necessary to comprehensively check the electrical components and various computer versions, of course, including the computer version of the airbag, and there will generally be no other major problems in addition to this.

If there is no impact, it is estimated that the airbag will not detonate.

Hello, as long as there is no fault The data is normal, you can use it, I hope it will help you [The car has to ask questions, and I ask the car master. Professional technician of 4S shop, 10 minutes to solve the bend. 】

You can use [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, if you install the missing type, you can only guess that there is no fault code, and the instrument light is not lit [If you have a problem with the car, ask the car master. The 4S shop is dedicated to Li Ye technician, and it will be solved in 10 minutes. 】

Install it and read the fault code, if it is normal, there is no problem. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Load the car to see if there is a fault code to know, generally speaking, soaked in water must be broken, the airbag computer board is generally in front of the gear lever or under the gear lever.

Where there is an airbag in the car is an airbag.

Use a computer airbag system to detect the fault, and then repair it according to the meaning of the fault.

If there is no fault, the computer can directly clear the fault.

If you can't solve it, you can go to No. 11, District 13, Wuzhong Auto Parts City, Minhang, Shanghai to help you solve the problem.

The car has been blistered, and the cause of the airbag failure is the failure of the airbag's computer board due to water entering the car.

The solution is: if the computer board of the airbag is faulty, you need to go to the 4S shop or repair shop of the car in time to overhaul or replace the computer board of the airbag, which can solve the problem of showing the failure of the airbag.

The airbag indicator flashes or stays on for 6-8 seconds after the vehicle is started, or the airbag indicator flashes for 5 seconds during the operation of the vehicle, indicating that the airbag may be malfunctioning. Then you should go to the 4S shop for maintenance as soon as possible.

The solution to the car airbag failure light is as follows:

1. The indicator light will be on when the engine self-checks the carBut the self-test will be extinguished at the end, about 5 seconds, this is a normal phenomenon, if it does not extinguish, it means that there is a fault;

2. False failure. The airbag is a line control, and there are many reasons why the airbag light is on, for example, if the battery loss is serious, the airbag will feedback the signal of low voltage of a certain airbag, and a fault code will be generated, which can be cleared;

3. If there is a real failure,There are many reasons for the failure involved, such as airbag failure, airbag hairspring failure, collision sensor failure, airbag plug loosening, line breaking, etc., which need to be read by the diagnostic instrument in time to find the fault point and eliminate the fault. Historical faults reach the ECU (Airbag System Control Unit) fault tolerance limit. Use a diagnostic instrument to clear the fault**, and if the light continues to be on, it means that there is still a current fault.

How to deal with cars after they are blistered.

The first thing is insurance, many car owners will ask, my car has not bought wading insurance, is the insurance useful? As long as it is static, that is, the vehicle parked there is not opened, such as parked in the parking lot, if it is flooded, basically all car owners will take out vehicle damage insurance, which is vehicle damage insurance, so the insurance company will make a claim.

Since under natural circumstances, the vehicle is damaged due to natural disasters such as rain and floods, the insurance company will be responsible for compensating the insurance company for the loss.

If the water overflows the workbench, it is recommended to change the airbag, and it is possible that the airbag has entered the water.

Hello car owner suggests that you replace the airbag coil.

Water ingress in the car's cab can cause most of the car's electronic systems to malfunction and even render the car unusable. It's good Zheng.

After the car cab is flooded, airbags.

The light is always on, indicating the failure of the airbag system, and the reasons for the failure of the airbag caused by water ingress, generally the following points:

1. Water ingress leads to short circuit and oxidation of the airbag wiring harness plug.

The plug harness in the cab generally has no waterproof measures, and when water enters, the plug will be short-circuited and oxidized, which will cause the system to fail.

2. The airbag control computer malfunctions due to water ingress.

Water enters the inside of the airbag computer, causing a short circuit in the computer circuit board, which causes the airbag system to malfunction.

3. Failure caused by the failure of other electronic systems of the car.

Nowadays, there is a little connection between the various electronic systems of the car, when a certain system fails, it will cause other systems to also fail, so when the water enters the cab, it will cause the failure of other electronic systems, and it will also lead to airbag failure.

The degree of water ingress is light, and the airbag system may return to normal after drying, and if the water ingress is severe, it is unlikely that the sock car will return to normal.

Regardless of whether the degree of water inlet is light or heavy, the best solution is to disconnect the battery cable in time, remove all the covering parts of the water inlet part, and dry the water. The wiring harness, plug and computer are all cleaned, dried and checked for normality.

Only when the water is completely dried, the wiring harness, computer and plug are all normal, and then loaded into the car, can the electronic functions of the vehicle be used normally.