Why can t I connect to wifi when it s so close?

Causes: 1. Mobile phone firmware problems.

2. The wifi parts need to be repaired.

3. Router setting problems.

4. The mobile phone wifi setting is wrong.

Solution: 1. Wipe and restore all previous WiFi settings.

2. Turn on the wifi option again.

3. In many wireless networks.

There is a blue arrow next to it, click on the blue arrow and then click Ignore this network.

4. Go back to the main interface and turn off your iPhone mobile phone and restart.

5. After restarting, enter the WiFi settings page to set up the WiFi.

6. Reset the router.

7. Go to the mobile phone repair point to check whether the wifi parts of the mobile phone are damaged.

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

1) The wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password connection in the mobile phone [Settings] - [Wireless LAN] - [Other Networks].

2) If the router is faulty, try to restart the router.

2. Prompt that the connection to the wifi is refused, and the fault phenomenon: others can be connected, but they can't connect to the wifi, and the connection is refused. Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac];

2) If the router is faulty, try to restart the router.

3. The mobile phone connection to wifi prompts that it has been saved, but the connection fails. Here's how to fix it:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

Good evening pro wifi connection is not good so that there may be the following reasons and solutions for your reference:1Make sure that the camera and phone or computer are on the same network, if not, you need to connect them to the same network.

2.Check that the distance between the camera and your phone or computer is too far, and if so, you need to move them closer. 3.

Check whether the wifi of the mobile phone or computer is turned on, if not, you need to turn on the firewall settings of the mobile phone or computer to check whether the wifi connection of the camera is restricted, if the limited stool system, you need to modify the firewall settings. 5.If none of the above methods solve the problem, you can consider restarting the camera and your phone or computer, or reinstalling the camera's wifi driver.

1. Check whether the wifi password is correct.

It is recommended to click when entering a password"Eye icon"to display the password and make sure that the password is correct.

2. Reconnect to WiFi

Please go to Settings --WLAN, click on the wifi you need to connect to, and click"Forgot Network Forgot password"reconnect.

3. Check whether the wifi network is normal.

Please compare whether the same wifi connection is normal with other mobile phones, and confirm whether it is the wifi or mobile phone. If it is due to Wi-Fi, please restart the wireless router to check. At the same time, you can enter the router management interface to check whether there are special functions

Such as the number of connections limit, MAC binding, Internet time management, etc.

4. Reset network settings.

Make a backup of wifi and other data, go to Settings - System Management - Backup and Reset - Reset Network Settings - Reset Settings, and then use it to view.

Note: Resetting the network settings will clear the connection records such as Wi-Fi, Mobile Frontier Data Network, Bluetooth, etc.; If you have dual SIM, you need to select the corresponding SIM card.

5. Reset all settings (do this when you can't see the reset network settings menu).

Note: Restoring all settings will not delete any software and files, only all settings of the phone will be restored, and some third-party app accounts need to be re-logged in, please confirm that it does not affect the use of the software before operating.

Method. 1. Turn off and restart the Wi-Fi connection.

If you use your phone to surf the Internet, the phone will keep a network IP address assigned by the Wi-Fi connection, it will be applied to the current Wi-Fi, if there is no address conflict, you don't have to worry, if there is a conflict, you have to close and restart the Wi-Fi connection.

Solution: Open the phone menu, enter the "Settings" bar, select "Wireless & Network Settings", enter the "Wi-Fi Settings" item, select "Turn off Wi-Fi" in the new window, and re-enter the project after completing the shutdown operation, and select "Turn on Wi-Fi" to restart the Wi-Fi connection.

Method. Second, the focus is on the Internet.

Method. 3. Check the Wi-Fi password.

Entering the wrong wireless wifi password is the most likely to cause the mobile phone to be unable to join the wireless network, such as forgetting the correct wifi password and entering it; The router has changed the wifi password, and the mobile phone still retains the wifi password before the change, etc.

Method. 4. Turn off the Wi-Fi hibernation policy.

If the problem of mobile phone not joining the wifi network often occurs, we should try to see if the router has set a Wi-Fi hibernation policy. If it is, set it to never.

Causes: 1. Mobile phone firmware problems.

2. The wifi parts need to be repaired.

3. Router setting problems.

4. The mobile phone wifi setting is wrong.

Solution: 1. Wipe and restore all previous WiFi settings.

2. Turn on the wifi option again.

3. There is a blue arrow number next to many wireless networks, click the blue arrow and then click Ignore this network.

4. Go back to the main interface and turn off your iPhone mobile phone and restart.

5. After restarting, enter the WiFi settings page to set up the WiFi.

6. Reset the router.

7. Go to the mobile phone repair point to check whether the wifi parts of the mobile phone are damaged.

WiFi is close or not, and can not be connected, is not an inevitable relationship, wireless routing settings have a high degree of encryption, such as filtering MAC, limiting illegal access to the network speed, and specifying the allocation of IPComplex password compilation. Wait, I'll give you the password, connect it, and you can't access the Internet, but you understand.

Ok, good luck.

1. All wifi can be connected before, indicating that the problem of not being able to connect is a temporary failure, and there are generally two possibilities:

One is the problem of wifi itself, the wireless router is overheated or there are too many wifi access devices, which will cause wifi to be unavailable. You can restart the wireless router first, and then connect to the wifi. If it doesn't work, restore the factory settings of the wireless router, input, .

Log in to the router with the default username and password admin, click on the setup wizard, follow the prompts step by step, reconfigure the wifi, and then link.

The second is the problem of the mobile phone, the DNS server address that connects to the wifi occupies too much of the device, or the mobile phone wifi firmware failure will also make the mobile phone unable to connect to the wifi. Ignore the wifi first, restart the phone, reconnect the wifi, if it doesn't work, it should be a wifi firmware problem, and you need to go to after-sales maintenance.