Why can t the little Ben robot connect to wifi?

Through the ** app, connect the robot to wifi, the whole process is very simple. Only the robot can only connect to the network, and the connection to the network is less than 5GHz. The pudding robot connection is relatively simple, after the robot is connected to the power supply, scan the bottom of the robot to install the client software, and then the client is registered, after the registration is completed, scan the bottom again for network configuration, wait for a moment after completing the operation, and the robot will be successfully connected through the voice prompt.

Summary. Take Xiaodu intelligent robot as an example,The reasons and solutions for the robot network can't be connected are:

1、First of all, you need to rule out whether it is a wifi password input error,Resulting in the small robot can not connect to the Internet;

2. If the connection fails after the first successful networking, you can check whether the router is working normally, and see if the name of the router has Chinese characters, and the router name cannot contain Chinese characters. Secondly, see if the router is a network, not a 5G network. If you are using a smart router, the router may be actively intercepted without actively setting the list, so you need to disable the router security settings first.

The robot cannot be connected to WiFi.

Restart the bot.

Take Xiaodu intelligent robot as an example,The reasons and solutions for the robot to connect to the Internet are:1、First of all, you need to eliminate whether Tantong search is incorrect wifi password input,Resulting in Xiaodu robot can not connect to the Internet; 2. If the connection fails after the first successful networking, you can first check whether the Lunqing router is working normally, and see if the name of the router has Chinese characters, and the router name cannot contain Chinese characters. Secondly, see if the router is a network, not a 5G network.

If you are using a smart router, the router may be actively intercepted without actively setting the list, so you need to disable the router security settings first.

Summary. 1. Configure the network, choose to configure the network, open the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support 5G network for the time being) and return to the client APP or WeChat *** Click to configure the network, enter the name of the wireless network at home and click the password to connect, remember to press and hold the robot for 3 seconds.

2. Sonic networking. Select Sonic Networking, open the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support 5G network for the time being) and return to the client APP or WeChat***Click on the sonic network, enter the name of the wireless network at home and click on the password to connect.

How does the robot connect to wifi?

1. Configure the network, choose to configure the network, open the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support 5G network for the time being) and return to the client APP or WeChat *** click on the hall to configure the network, enter the name of the wireless network at home and click the password to connect, remember to press and hold the robot for 3 seconds. 2. Sonic networking. Select Sonic Networking, open the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support 5G network for the time being) and return to the customer stool Biduan APP or WeChat***Click on the sonic network, enter the name of the wireless network at home and click on the password to connect.

Dear: If I'm happy with you, remember to give me a thumbs up.

Dear: If I'm happy with you, remember to give me a thumbs up.

Thank you. <>

2.If you don't support wired mode, you can find the wifi setting option through the robot's operating system, and manually add the wifi name and password that need to be connected to the wifi list. 3.

If the robot does not have a built-in operating system, you can use an external device to connect to the wifi, such as a wifi sharer, connect the device to the wifi, and then connect the robot to the hotspot wifi of the device. It should be noted that when connecting to WiFi, you need to make sure that there is no input error when entering the secret fiber code, and that the WiFi module of the robot can work normally in order to successfully connect to WiFi.

Hello, I'm glad to serve you, Xiaoduo intelligent robot can't connect to wifi for the following reasons:1Wrong wifi password:

If the wifi password entered is incorrect, Xiaoduo intelligent robot will not be able to connect to wifi. At this time, you need to check whether the wifi password is correct and re-enter the password to connect. 2.

Unstable WiFi signal: If the WiFi signal is unstable, it may cause Xiaoduo Intelligent Robot to be unable to connect to Shirt Shuhuai WiFi. At this point, you can try moving the robot closer to the WiFi router, or restart the WiFi router to improve the signal quality.

3.WiFi router setting problem: If the WiFi router is set with security settings such as MAC address filtering and IP address restrictions, it may cause Xiaoduo intelligent robot to fail to connect to WiFi.

If there is a problem with the Xiaoduo intelligent robot system, such as a system update failure or an incorrect network setting, it may also lead to the inability to connect to WiFi. At this time, you can try to restart the Xiaoduo intelligent machine, complete the matching, or update the system. It should be noted that when connecting to WiFi, the Xiaoduo smart phone or friend needs to ensure that the WiFi router and the Xiaoduo smart robot are in the same LAN, and at the same time, the signal quality and security settings of the WiFi router need to be ensured.

Hello, 1, configure the network, choose to configure the network, open the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support 5G network for the time being) back to WeChat***Click to configure the network, enter the name of the wireless network at home and click the password to connect, remember to press and hold the robot for 3 seconds. 2. Sonic networking. Select Sonic Networking, turn on the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support 5G network for the time being) Return to WeChat***Click on the sonic network, enter the name of the wireless network at home and click on the password to connect.

A robot is a machine device that performs work automatically, including any machine that simulates human behavior or thoughts and simulates other creatures (such as robot dogs, robot cats, etc.). There are many taxonotypes and controversies about the definition of robots in the narrow sense, and some computer programs are even called robots. In contemporary industry, robots refer to man-made machines and equipment that can perform tasks autonomously, replacing or assisting human work, generally electromechanical equipment, controlled by computer programs or electronic circuits.

The way the bot connects to the network is:

1. Configure the network, select the configuration network, open the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support the 5G network for the time being) return to WeChat***Click to configure the network, enter the name of the wireless network at home and click the password to connect, remember to press and hold the robot for 3 seconds.

2. Sonic networking. Select Sonic Networking, turn on the robot at this time, press and hold the robot wifi button for three seconds (the smart companion machine does not support 5G network for the time being) Return to WeChat***Click on the sonic network, enter the name of the wireless network at home and click on the password to connect.

A robot is a machine device that performs work automatically, including any machine that simulates human behavior or thoughts and simulates other creatures (such as robot dogs, robot cats, etc.). There are many taxonotypes and controversies about the definition of robots in the narrow sense, and some computer programs are even called robots. In contemporary industry, robots refer to man-made machines and equipment that can perform tasks autonomously, replacing or assisting human work, generally electromechanical equipment, controlled by computer programs or electronic circuits.

The robot body, its arm generally adopts a space open-chain linkage mechanism, in which the moving pair is often called a joint, and the number of joints is usually the number of degrees of freedom of the robot. According to the different types of joint configuration and motion coordinates, the robot actuator can be divided into Cartesian coordinates, cylindrical coordinates, polar coordinates and joint coordinates. For the sake of anthropomorphism, the relevant parts of the robot body are often referred to as the base, waist, arm, wrist, hand (gripper or end effector) and walking (for mobile robots).

Click on the desktop to enter the settings application, click on the WLAN option to enter, click on the WLAN option switch, in the list of searched WiFi signals, click on the need to connect to the wifi and enter the password and click to confirm. If there is a situation where the Internet is not connected to the Internet, you can take the following solutions: 1. Try to re-select and reset the WLAN wireless router at the end of the WiFi hotspot, etc., and set the WAP WAP2 encryption 8 10-digit pure numeric password; 2. It is best to choose to manually assign IP and bind your iPhone to the LAN list, and if there is a homegroup or other firewall established by win7 in the hotspot, it is better to turn it off; 3. Restore factory settings and reboot Then it is recommended to manually connect the wifi hotspot; 4. Check the kernel firmware version and core information of your MID tablet, and then try to update and upgrade the firmware.

Hello, I'm glad to answer for you: Xiaobai intelligent robot is networked like this: press and hold the top button of the robot to turn on the machine, at the same time, the button is also a volume adjustment button, and the volume can be adjusted by pressing twice quickly.

2. Register and log in with your mobile phone to scan ***, ** and install the Wang Ke client, note the bureau and log in to the client robot network robot needs to obtain the current network access point name and password information by scanning ***. After entering the information on the mobile phone, *** can be generated. The steps are as follows: Tongling 1 After registering and configuring the host information, follow the APP process, the wifi name is the wifi connected to the mobile phone by default, enter the wifi password, and generate***.

2 According to the voice prompt, press the top button of the robot's head, aim at the camera to scan ***3 The scan is successful, the robot obtains the registration information and wifi information contained in ***, the robot is successfully bound, and the networking is successful. The network connection is successful, and the childe Xiaobai robot starts broadcasting, and you can start talking.