What kind of material is the mobile phone protector, or something like that?

At present, there are many kinds of materials for protective film on the market, and the materials used in high, medium and low grades are different. Generally, the low-grade is made of PVC material, the definition of the protective film made of this material is not enough, with adhesive, it is not easy to take it after pasting it on the screen, even if it is taken off, there will be residual glue left on it, which is very difficult to deal with, and it is not recommended to use. The medium and high-grade protective film is made of PET material, and the PET material imported from Japan is better, and the protective film made has very high light transmittance and clarity, and has a certain thickness and hardness, which can play a role in anti-scratch and wear-resistant.

Generation PC film Generally, the film is made of pellets, and PC is generally extruded or calendered.

The second-generation PET film is the kind that you usually go to your mobile phone to stick to.

The third-generation ARM is best without glue imported from Japan and may be a little more expensive.

At present, in the mobile phone accessories market, there are three common screen protector materials: PVC (mainly improved version), PET and ARM. As for the earliest PP material, because it does not have adsorption power, it completely relies on glue to stick on the screen of the mobile phone, and its service life is short, and it will leave obvious glue traces on the screen of the product after tearing off, which has now been eliminated.

The film is to better protect the mobile phone, but it is more harmful than good for the user of the mobile phone, not to mention that the film itself may reduce the brightness of the mobile phone and affect the eyesight, the film itself is scratched faster than the film, because the strength of the film itself is much worse than that of glass, and the film is to replace the spent film many times within a certain period of time. In fact, most of the time, the consumers of the film are just facing a fancy screen and deceiving themselves. Now that the mobile phone is updated so quickly, what is the point of waiting until you change the phone to find that the original mobile phone screen is as bright as new???

Pay attention to the details when running naked, in fact, the life of the mobile phone screen is very long, and you can also coat the screen with a layer of Xiayu mobile phone liquid film, which can effectively protect the naked screen, prevent scratches and sterilization.

Common mobile phone film materials include tempered glass film, TPU film, PET film, etc. Among them, tempered glass film is the best material on the market to protect the mobile phone screen. It has the advantages of drop resistance, scratch resistance, fingerprint resistance, etc., and it is also relatively suitable, so it has been chosen by many consumers.

In addition to tempered glass film, there is also a mobile phone film called TPU film. The advantages of TPU film are mainly that it has anti-oxidation and anti-aging properties, and is very soft and has a long service life. However, its transparency and clarity are relatively poor, which reduces the display effect of the mobile phone screen.

Compared with the first two, PET film is relatively cheap, but the protective performance is much worse than that of tempered glass and TPU film. Therefore, for the precious mobile phone, choosing a cost-effective tempered glass film is the best choice.

In addition to the above-mentioned mobile phone film materials, there are also some new mobile phone film materials, such as bionic knife material, soft gel material, etc. These materials have the advantage of being more durable and have a longer service life, but they are relatively expensive, and have disadvantages such as low light transmittance and unsatisfactory presentation.

To sum up, tempered glass film is the most ideal mobile phone film material on the market, because it is not only the most suitable, but also does a good job in protecting mobile phones. However, consumers should make a choice according to their own needs and financial ability when choosing. <>

The materials of mobile phone protective film are as follows: PP material, PVC material, PET material, AR material, PE material, OPP material and other materials.

PP material does not have any adsorption capacity, generally glue to glue, after tearing off will leave a glue mark on the screen, will corrode the screen for a long time.

PVC material is soft in texture and easy to paste, but this material is thicker and has poor light transmittance, which makes the screen look hazy. Tearing off will also leave an imprint of glue on the screen. At the same time, this material is also relatively easy to turn yellow and oil with the change of temperature, and the service life is relatively short.

PET material is the most common protective film material on the market, which is relatively hard and scratch-resistant.

AR material is currently the best screen protector on the market. AR is a synthetic material, which is generally divided into three layers, silica gel is the adsorption layer, PET is the middle layer, and the outer layer is a special treatment layer. The special treatment layer is generally divided into two types, AG treatment layer and HC treatment layer, AG is anti-glare treatment, and the frosted protective film is treated in this way.

HC is a hardness treatment, which is a treatment used for highly transmittance protective films. This screen protector is characterized by its non-reflective screen and high light transmittance (more than 95%), which will not affect the display effect of the screen.

The raw material of PE material is LLDPE, which is relatively soft and has a certain stretch.

The mobile phone protective film made of OPP material is relatively close to the PET protective film from the appearance, its hardness is large, and it has a certain flame retardancy, but its paste use effect is poor, and it is rarely used in the general market.

Puya Electronics specializes in the production of mobile phone protective film, the product is made of original imported materials from Japan, three layers of film in one, super scratch resistance and wear resistance, electrostatic adsorption without glue, can be pasted many times without leaving residual glue.

The screensaver we use is a hard-treated PET material. It's like a layer of glass. I can't tell that the film is pasted! And it's hard and scratch-resistant!

There are PE, PET, OPP, PP, PVC and other protective films, but depending on which one you use, now the protective film of OCA glue is used more for mobile phones, and now the OCA protective film is a special protective film for Apple, so if you want a protective film, you can go to see OCA!