How to solve the problem that the Apple 6S cannot be activated after flashing

First, after the Apple phone is flashed, activate the forgotten LD password, and retrieve the ID password through the mailbox.

Second, the specific operation method:

2. You can also find this page on the homepage of Apple's official website, on the home page, click on Technical Support, click Apple ID after entering, and then click "Find Apple ID", and then click"Go to My Apple ID"。

4. Fill in the last name, first name, and email address, and then the next step, if you have changed your email address before and don't remember what email address you use now, you can also fill in the previous email address, and the system will help you search for your Apple ID.

5. Select Email Verification or Full Security Prompt Questions.

6. Try email verification first.

7. You will receive a verification email to your mailbox, open the email and click Reset Now.

8. Then enter a new password to complete the password reset.

9. Try to verify with security questions again.

10. Continue with the verification questions set before.

Send ** to help you take a look.

1. Restart the phone: When our phone can't activate the system, it may be a problem with our phone's system and may be stuck. At this point we can restart the phone and then turn it on again to give it a try.

2. Replace SIM card: Sometimes it may be a problem with the SIM card of our mobile phone, which leads to problems with the mobile phone signal and the mobile phone cannot be recognized. At this time, you can try it with a friend's mobile phone card to know whether it is a SIM card problem or a mobile phone problem, and finally go to make up a card and reactivate it.

3. Restore factory settings: When there is a problem with the mobile phone system, there will be a phenomenon that the SIM card of the mobile phone cannot be recognized or the contact is poor. At this time, we can do a factory reset of the phone and have a try.

Settings - General - Restore - Erase All Content (Note: Before restoring, please do a good job of backing up your phone data to avoid unnecessary losses).

4. Downgrade processing or upgrade processing: Since this situation is caused by us after flashing, we can downgrade the mobile phone and uninstall the high-cost installation package. Or upgrade the system and replace the original system to give it a try.

5. Mobile phone repair: Finally, we can solve it by repairing the mobile phone, because none of the above methods will work, only the problem of the mobile phone may be possible. Because we have a problem with flashing the machine, we can't brush it well, just find a technician to solve it.

6. Replace the mobile phone: If the repair of the mobile phone is expensive, or it cannot be repaired, or it is ineffective to replace other systems, then replace it with a new mobile phone.

There is no way, now the network needs to be verified by the server before it can be activated.

Prepare the phone card (i.e. nano-SIM card or micro-SIM card) to be used by Apple iPhone, if you do not insert the mobile phone card, you will not be able to activate the phone.

1.Start pressing the power button of your iPhone to power on.

2.After waiting for the initial boot of the system, you will be taken to the welcome screen of the activated device, starting with swiping to unlock.

3.You will then be taken to the language selection screen, select China, and click the "Next" button.

4.Since during the activation process, you need to connect to the network and verify the phone with the Apple server to activate it, so you need to use the network. Select Wireless Network.

Once connected, click the "Next" button.

5.This is followed by the selection of some phone accessibility features, such as the "Location Services" feature, which is generally recommended to choose to activate.

App store, here you can enter or not, click to skip this step.

7.Then it is prompted whether to enter the dense mu shed code, Yubi is the same, you can create a password, if you don't create it, click not to add.

8.For example, iCloud and other settings are optional, and Genqing Naiju can choose according to your own needs.

9.When everything is set up, you will see the welcome screen in Chinese, click to start using, and then the activation has been successful. In addition to some options that must be selected, such as iCloud, passwords, etc., you can choose to skip during the activation process, and you can set it slowly during the use process later.

1.The following is an introduction to the activation lock skip method, when activating the iPhone6, you can choose to skip the step of creating an Apple ID, and you don't need to log in when you log in with your Apple ID and create a registration.

2.Skip the iPhone 6 activation lock function to avoid flashing or updating the system in the future to display the verification activation lock prompt.

3.If the activation on the iphone6 has been turned on, and the activation lock cannot be skipped

Many users flash their phones.

, the iPhone cannot be activated when the device is activated, and the retry is still the same. If your iPhone won't activate, you may hear that the activation server can't be connected or your SIM card isn't supported, see what to do here.

What should I do if the iphone6 can't be activated after flashing the iphone and can't turn it on? You just need to do ......

Check the device as follows.

1. If you are activating your iPhone, please make sure the SIM card.

Plug it into your iPhone properly. Even if it is a non-contract machine, the SIM card needs to be inserted to activate the iPhone;

2. If you insert a SIM card and still prompt "no SIM card" or "invalid SIM card", please admit whether your mobile phone has a network lock.

3. If you are prompted to log in to your Apple ID during activation, it means that your device has started Activation Lock, and it is necessary to enter the correct Apple ID password for the next step of activation.

What should I do if the Apple mobile phone update system fails to flash? There are many reasons for the failure of flashing,First of all, we have to determine what causes the failure of flashing,If there is a problem with the hardware of your mobile phone,The possibility of success of flashing is relatively small,Then it is advisable to repair it。

If the mobile phone can be used normally, just want to update the promotion system and fail to flash, the reason may be the data cable connection or network problems, then we can test the flashing a few more times.

After flashing, you must log in with the ID account you previously logged in to activate, if you have forgotten your ID password, you can use your email to retrieve your ID.

Cause: The reason for this problem is that the phone has logged in to the ID and enabled the "Find My iPhone" function before flashing, and after flashing, the Apple ID that was previously logged in to the phone is required to activate. This is an anti-theft measure from Apple, and it must be activated with a previously logged in Apple ID, because once this feature is turned on, the various DFU modes cannot be activated no matter how much you swipe.

I'm also experiencing this kind of problem, how did you solve it, please.

Hello, my phone is also like this, yours have solved it.

You can re-flash the phone to see.,It's really not good to go to the mobile phone repair to see.。

Is it solved? I'm having the same problem.

sliding to power off. Sometimes iPhone freezes or is unresponsive, at this time it can't be shut down by normal methods, you can use force restart and force shutdown to get iPhone back to work. Force shutdown.

At the same time, press and hold the power (power button and power button) + home button, and release the button after the black screen appears, the white apple logo will appear within a few seconds after the home button is released, at this time, the power button is released, and the white apple logo disappears and the screen is turned off to complete the shutdown.

Force restart as follows:

Press and hold the power button on the right side of the fuselage. Press and hold the Power lock button and then press and hold the volume down button on the left. When these buttons are pressed and held at the same time, the screen will turn off until the screen lights up again and the Apple logo appears.