How many keels are needed for a 40 meter wide gypsum board partition wall?

1. The spacing of wall buds is 400 center spacing, and 100 wall studs are needed. With a spacing of 300 centers, 133 studs are required. There are 29 heaven and earth bones, 45 heart bones, and 300 or 399 card pieces.

Two of the bones are for the wall, which can also be removed and replaced with other materials, such as blockboard or wall bones.

2. Light steel keel ingredients per square ceiling, main bone meter, auxiliary bone meter, main hanger, 4 pendants, expansion sleeve, M5 or 6 cross-arm screw sleeve, 14 nuts. The boom of 8 is calculated according to the specific ceiling sinking height of the site.

3. Gypsum board is a material made of building gypsum as the main raw material. It is a kind of building material with light weight, high strength, thin thickness, convenient processing, sound insulation, heat insulation and fire resistance, etc., and is one of the new lightweight boards that are currently focused on development.

The number of light steel keels required per square meter of gypsum board partition wall depends on factors such as the size, spacing and thickness of the light steel keel. Generally speaking, the light steel keel specification of the commonly used shed Qingsheng is 50*35mm or 75*35mm, and the thickness of the wall panel is divided into mm. Assuming that the spacing of each light steel keel is 60cm, then the number of light steel keels required per square meter is approximately as follows:

50*35mm light steel keel, thick gypsum board partition wall needs roots, 12mm thick gypsum board partition walls need roots, 15mm thick gypsum board partition walls need roots. - 75*35mm chain old light steel keel, thick gypsum board partition wall needs roots, 12mm thick gypsum board partition wall needs roots, 15mm thick gypsum board partition wall needs roots. It should be noted that this is only a rough estimate, and the actual number of light steel keels required by Zhengxun also needs to be calculated according to the specific situation.

In addition, when carrying out the construction of gypsum board partition walls, it is necessary to follow the relevant building codes and safety standards to ensure the quality and safety of the construction.

The specifications of the commonly used light steel keel for partition walls are 75mm and 100mm, depending on what kind of material is needed, you can choose according to different materials, and each place is also different. How much is needed depends on the construction requirements. Click to get the latest

Extended information: Calculation of the area of the partition wall of light steel keel gypsum board.

1. The national fixed amount plus the fee.

The light steel keel gypsum board partition wall is based on the national quota plus fee, and the ** of single-row keel single-sided gypsum board is 54 56 yuan per square meter. If it is a single-sided keel double-sided gypsum board, it is to add a side of gypsum board on the basis of the above-mentioned material costs and labor costs, etc., roughly ** in 79 yuan 84 yuan per square meter.

2. Keels are used on each side of the partition wall.

If each wall in the partition wall is keel, and then the gypsum board is sealed outside, it is called double-row keel double-sided gypsum board.

3. Classification of partition wall types.

According to the national quota, if there is only a single row of keels and a board on one side in the partition wall, it is called a single row of keel and single-sided gypsum board.

If there is a single row of keels and gypsum board on both sides of the partition wall, this is called a single row of keel double-sided gypsum board.

4. Home decoration partition wall**.

Due to the small area of the home decoration partition wall, the decoration company will be more expensive: the single-row keel single-sided gypsum board is suitable at about 64 yuan per square meter. And the single-row keel double-sided gypsum board ** is suitable at 94 yuan and 110 yuan per square meter.

If you want to know more about it, you can consult Huicheng keel. Jinju Huicheng Keel Factory has always been known for its quality, and the keel produced by the factory is not easy to be corroded and damaged, and is very durable. It is a light steel keel production and processing company, with a complete and scientific quality management system, and perfect and reliable production equipment.

Deeply loved and trusted by our customers. <>

A piece of gypsum board (Taishan's, 6 yuan per square, 12 yuan on both sides. The keel is about 10 yuan per square (including along the ground, vertical, main keel, screws, etc.), and the manual is about 8 yuan. Soundproof cotton is added an additional 8 yuan per square meter. This is the cost**.

A square partition wall should be at least 6 meters keel. The spacing specification of the keel of the partition wall shall be implemented according to the national standards for interior decoration of buildings.

Yes, it is 30 centimeters, and in the past it was generally 60 centimeters, but now it is generally 40 centimeters.

Light steel keel partition wall.

The height should be within six meters, and the top must be to the top, so that the whole degree will be firm, the light steel keel partition wall in the construction, if the main structure of the indoor has been started and slippery, the ambient temperature should be more than 5 degrees. The construction personnel should first be familiar with the drawings, and then carry out elastic line positioning according to the requirements.

Construction requirementsHanging bars. Distance: 900mm1200mm When the ceiling wall and column are brick masonry, the anticorrosive wood bricks should be embedded at the elevation point (the distance from the 9001200mm auxiliary dragon is normally about 300mm, and the wire octagonal box on the top is in place, and the light vent and the orientation of the exposed orifice are determined.

veneer (drywall.

Requirements: 58mm gap should be left in the seam, and the cross-section should be made "V-shaped!" The corner splicing uses 5 centimeters board to make a base, or laminated gypsum board and digs "7, t, L-shaped and then quietly splices to prevent cracks in later paint construction!"

The gypsum board surface should be covered with the sky (not and the laminated gypsum board does not show the gaps), and self-tapping screws should be used.

Fixed. Do not have too many nail holes (temporarily fixed during construction).

The thickness of the light steel keel varies from to.

In terms of length, gypsum board has seven specifications such as 1 meter, 2 meters, and 3 meters6, and in terms of width, there are two specifications of 90 cm and 1 meter 2, and there are eight specifications in thickness.

Under normal circumstances, most people will choose light steel keel when using paper gypsum ceiling, Pu's gypsum board uses Pu's keel, and the gypsum is thick to use a thicker keel. There are two kinds of galvanizing of keel, one is hot-dip galvanizing and the other is cold-dip galvanizing. Hot-dip galvanizing is high, cold-dip galvanizing is low.

The ceiling keel is composed of a bearing keel (main keel), a covered keel (auxiliary keel) and various accessories.

The specifications of the light steel keel commonly used to make partition walls are generally 75mm and 100mm, and this specification is to determine the wall thickness of the partition wall, and its length is generally 3m and 4m. The specifications and thickness of gypsum board are some and some are below the thickness, but they are generally non-standard; The length is 2400mm, 3000mm, and the width is mostly 1200mm.

Light steel keels generally have:

There are 70 wide: 25 high x 3 m long thick vertical bones.

20 meters high * 3 meters long thick bones.

75 width: 30 height x 3 m long thickness vertical bone.

22 meters high * 3 meters long thickness of the bones.

100 width: 40 height x 3 m long thickness vertical bone.

30 meters high * 3 meters long thick earth bones.

50 cassette main bones: 28 high*m long thickness cassette.

32 high * m long thickness card bone.

50 accessory bones: 17 high * 3 m long thickness accessory bones.

38 main bones: 10 high * 3 meters long thickness main bones.

Triceratops: 75 wide galvanized thick 90 wide galvanized, gold thick.

The ceiling keel has:

Aluminum keel: The main bone is 16 wide * 23-32 high 3010 long and the size is 603 * 603 595 * 595

Accessory bone 16 wide * 16-22 high 3010 long size 603 * 603 595 * 595

The side bones are 12 wide * 18 high * 3 m long 20 wide * 20 high * 3 m long.

Painted iron keel: main bone 22 high * 3 m long plane Auxiliary bone 16 high * 3 m long plane.

The main bone is 22 high * 3 m long groove The accessory bone is 16 high * 3 m long groove.

Galvanized keel: main bone 22-32 height * 3 m long plane accessory bone 16-32 * 3 m long plane.

The main bone is 22-32 meters high * 3 m long groove The accessory bone is 16-32 x 3 m long groove.

Side bones 16 high * 16 wide sides 18 high * 18 wide sides.

Taishan gypsum board:

Generally, it is 1220 cm wide * 2440 cm long and 8 cm thick - 12 cents.

Calcium silicate board: Tongfu 1220 width * 2440 length thickness 6 cent-8 cents.

Sanle 1220 width * 2440 length thickness 6 cents - 8 cents.

Nanhai Jinping keel factory in Foshan City, Guangdong Province.

Summary. Dear, I'm honored to have your question The information that the teacher found for you here is: how many main keels are needed for the gypsum board partition wall 35 squares:

The gypsum board partition wall 35 square needs 5 main keels. If gypsum board is used as a partition wall, you need to make a frame first, and the keel used in the general frame needs to be strong, and then install gypsum board, and then carry out joint treatment, and after the installation is completed, you also need to brush latex paint. Gypsum board to partition the wall, its partition wall effect is still very good, because although the weight is light, but the strength brought is relatively high, don't worry, the partition wall with gypsum board is not strong.

The light steel keel is a metal skeleton for construction made of high-quality continuous hot-dip galvanized strip as raw material and rolled by cold bending process.

Dear, I'm honored to have your question The information that the teacher found for you here is: how many main keels do you need for the 35 sides of the gypsum board partition wall: 5 main keels for the 35 sides of the gypsum board partition spine head bench wall.

If the old plaster board is used as a partition wall, you need to make a frame first, and the keel used in the general frame needs to be strong, and then the gypsum board is installed, and then the joints are treated, and the latex paint needs to be brushed after the installation is completed. Gypsum board to partition the wall, its partition wall effect is still very good, because although the weight is light, but the strength brought is relatively high, don't worry, the partition wall with gypsum board is not strong. The light steel keel is a metal skeleton for construction made of high-quality continuous hot-dip galvanized strip as raw material and rolled by cold bending process.

Suggestion: Dear [Xian Hall File Flower] Now that the epidemic is repeated, you must pay attention to the <> of the slag when you go out and pretend to be chaotic

Wear a mask when you go out, wash your hands frequently! Have a great day, <>

Answer]: C According to the provisions of Article 1 of the Code for the Construction of Residential Decoration and Decoration Engineering (GB 50327-2001), the installation of light steel keel shall comply with the following regulations: The keel should be fixed along the ground, along the top keel and the frame keel according to the position of the elastic line, and the edge line of the keel should coincide with the elastic line.

The end of the keel should be installed firmly, and the distance between the fixing point of the keel and the substrate should not be greater than 1m. The installation of the vertical keel should be vertical, and the keel spacing should meet the design requirements. For damp rooms and steel mesh plastering walls, the keel spacing should not be greater than 400mm.

When installing the support keel, the support card should be installed in the direction of the stool pin of the vertical keel, and the card spacing should be 400 600mm, and the distance from both ends of the keel should be 20 25mm. When installing the through-series keel, one partition wall below 3m is installed, and two partition walls are installed at 3 5m. When the transverse joints of the veneer are not along the ground and along the top keel, the cross brace keel should be fixed.

The installation of additional keels at doors, windows or special contacts should meet the design requirements.

The thickness of the gypsum board used for the partition wall is 12mm, the width of the board is 900mm and 1200mm, and each board should be supported by three vertical keels, so its spacing should be 450mm and 600mm. Therefore, the maximum spacing of the slender pins of the vertical keel of the light steel keel gypsum board partition wall should be 600mm.

Summary. This problem can be caused by poor quality or improper installation of drywall. Workaround:

1.First of all, the quality of the drywall should be checked to ensure that they are of high quality to ensure that they can resist multiple pressures. 2.

Secondly, it should be ensured that the drywall is installed correctly to ensure that they can resist multiple pressures. 3.Finally, it should be ensured that the keels are installed correctly to ensure that they are able to resist multiple pressures.

Personal Tips:1When installing drywall and keels, it should be ensured that their quality and installation are correct to ensure that they can resist multiple pressures.

2.When installing drywall and keels, you should make sure that they are installed correctly to ensure that they can resist multiple pressures. 3.

When installing drywall and keels, you should make sure that their installation is secure to ensure that they can resist multiple pressures. Related knowledge: gypsum board is a commonly used building material, it has good sound and heat insulation properties, can effectively block external noise and heat, and make the indoor environment quieter and more comfortable.

Keel is a commonly used building material, which can effectively support the wall and make the wall more solid and stable.

The height of each structure is meters, the width is meters, the thickness is 12 mm, and the weight of each structure is about 20 kilograms. Total weight: 4000 x 20 = 80000 total volume:

4000 x x x = 1152 cubic meters.

Fellow, I really didn't understand, I can be more specific.

This problem can be caused by poor quality or improper installation of drywall. Workaround:1

First of all, the quality of the drywall should be checked to ensure that they are of high quality to ensure that they can resist multiple pressures. 2.Secondly, Ying Hui should make sure that the drywall is installed correctly to ensure that they can resist multiple pressures.

3.Finally, it should be ensured that the keels are installed correctly to ensure that they are able to resist multiple pressures. Personal Tips:

1.When installing drywall and keels, it should be ensured that their quality and installation are correct to ensure that they can resist multiple pressures. 2.

When installing drywall and keels, you should make sure that they are installed correctly to ensure that they can resist multiple pressures. 3.When installing drywall and keels, you should make sure that their installation is secure to ensure that they can resist multiple pre-pressure dust trails.

Related knowledge: gypsum board is a commonly used building material, it has good sound insulation and heat insulation performance, can effectively block external noise and heat, and make the indoor environment quieter and more comfortable. Keel is a commonly used building material, which can effectively support the wall and make the wall more solid and stable.