What are the steps to install a steel dense rack? How to disassemble and assemble the dense rack?

The installation of the dense rack (倬佰dense rack) is mainly composed of 7 steps:

The first step is to install the track, the role of the track is to slide the dense rack, it is one of the most important components of the dense rack, the installation of the track is to ensure the level, only the track installation level can make the dense rack slide more smoothly, and want to ensure the level of the track first to ensure that the ground is flat, if the ground is uneven, then when laying the track to lay the horn on the ground.

The second step is to install the chassis. The chassis is placed on top of a laid track, which is generally made in advance.

The third step is to fix the column, after the chassis is installed, you need to fix the column, pay attention to tighten the connecting screws between the column and the chassis, if not tightened, then the dense frame will shake after installation.

The fourth step is to install the side panels and debug the crank of the dense rack. The movement of the rack requires the rotation of the rack, so it must be adjusted until the rack can control the slide of the rack flexibly and lightly.

The fifth step is to install the partitions, hanging plates and top plates, which is the easiest step, as long as they are installed and fixed in the designated location.

The sixth step is to install the door panel, the installation of the door panel should pay attention to see if the door crack is tightly closed after closing, if it is not tightly fitted, then it is unqualified, and it should be re-debugged.

The seventh step is to install dust plates, sealing strips and catalogue plates, etc., and finally to accept the installation of dense racks.

Step 1: Install the manual dense rack rail. Precautions: When installing the guide rail, it should be noted that the parallelism of the guide rail must be less than about one millimeter per meter, and the height difference of the butt of the guide rail is less than.

Step 2: Install the manual dense rack chassis. Note: When installing the manual dense rack chassis of the archive room, the floor beam must be straight, and the straightness should be less than each meter.

Step 3: Install the manual dense frame column and assemble the dense frame frame body part. Precautions: This step is very important, so special attention should be paid to ensure that the perpendicularity between the column and the guide rail is less than 2mm, so as to increase the stability of the manual dense rack in the archives.

Step 4: Install the top plate, brake disc, hanging plate, side guard plate and other components. Note: In this step, the more important thing is to operate in some details.

Step 5: Install manual dense shelf shelves and door panels. Note: When installing these two parts, it is necessary to pay attention to the slow adjustment during installation, and it must be installed in place.

Step 6: Install the manual dense rack baffle. Note: This is also the last step of the manual dense rack installation step in the archive room, as long as we find the right card position.

Some customers need to relocate the original dense shelves due to the change of office location or the re-planning of archives and databases. will come acrossDense rack disassembly and assemblyAs a custom office furniture, the dense shelf needs to be disassembled and assembled by professionals, and a certain fee needs to be paid. After consulting a number of companies that undertake the disassembly and relocation of dense racks, many customers will find that they have exceeded their expectations and imagination.

Why is the cost of disassembling and assembling dense racks so high? Let's explain it to you.

The disassembly and relocation of dense racks is different from the relocation of other ordinary office equipment, because of its huge volume and weight, it cannot be relocated as a whole, so it must be completely disassembled. People who have witnessed the installation of newly purchased dense racks will understand that the process of disassembling and installing dense racks is actually very cumbersome.

Because of the large volume, basically each structure is in bulk, in order to facilitate delivery and handling, it is assembled after arriving at the customer's installation site. Because the dense shelf is a kind of office furniture, the appearance requirements are quite high, horizontal and vertical, neat and beautiful, even if the gap is aggregated together, it should be adjusted as small as possible. The technical workers who install the dense frame are generally multi-skilled installers with a higher level, and ordinary people are not competent, because the installer needs to adjust the coordination and balance of the transmission mechanism, need to debug the levelness of the floor, need to overcome the deformation of the steel plate and the clearance error of the installation, and adjust the shape of the dense frame as a whole, how to achieve a solid structure and beautiful and neat at the same time, which seems simple, but in fact it is very difficult to operate.

The wages of the installers who install the dense racks are generally higher, and their income is not calculated by the core socks on weekdays, and they are basically contracted according to the number of dense racks installed. The main cost of dense frame relocation is the salary of the installer, and now the current situation of talent and labor shortage, it is not surprising that the salary of the dense frame installer is high. Relocation of dense shelves, many people have forgotten to consider the installation of workers to dismantle the wages of the dense rack, dismantling the dense frame is also a very laborious work, you need to loosen hundreds of screws to take out, and these screws have been tightened very tightly as early as the first installation, dismantling is very hard-working, the time of dismantling the dense frame is basically the same as the time of installing the dense rack.

We hereby solemnly remind all customers who are about to purchase new dense racks and customers who already have dense racks should make more planning considerations when purchasing new dense racks, and determine a stable and reliable relatively long-term installation plan to prevent the situation of having to adjust the dense rack due to the development and change of the enterprise, because the relocation of the dense rack will really generate many unnecessary costs.

We may have encountered such a cabinet in the office unit, which is the place where the unit is used to put documents, but when buying a dense shelf, I don't know what methods there are when disassembling and assembling, and how to buy a dense shelf, so let's introduce it to youDense rack disassembly and assemblyOne. What are the methods of disassembling and assembling dense racks.

1.When we disassemble and assemble, we must first remove the upper dust plate and the lower shelf, but pay attention to dust in the process.

2.Also, the lock is disassembled, but when disassembling the lock, you should also pay attention to the strength of the hand, otherwise it will be damaged, but if you want to install it again, there will be a lot of problems.

3.But when dismantling, it is mainly necessary to go from top to bottom, from the outside to the inside. There is the most important lock after dismantling, but the main frame is to be disassembled, but the volume of the main frame is larger, we should pay attention to safety in the process of disassembly, but also handle it gently, and there are some small parts of the disassembly to pay attention to storage.

Two. How to buy a dense shelf.

1.When purchasing dense shelves, don't pay too much attention to low **** and value, cost is usually closely linked. There are also dense shelves that are too low, usually low cost and poor quality, but generally their appearance and design are poor, and there is no cultural value.

However, some experienced purchasers know that there will be many unforeseen hidden dangers when buying products that are too low, which leads to many problems after purchase, which is regrettable. It is relatively appropriate to choose this type of dense rack product.

2.There is also when buying, it is usually not a mistake to buy a famous brand to buy a famous brand, then the purchase quantity is large, you must do what you can, the famous brand dense rack (especially the imported dense rack) compared with the general domestic high-quality dense rack, or quite expensive, less than 50-100%, more than 200-300%. There are also brand promotion costs for famous brand dense shelves, but it is still necessary to pay a lot of real gold **; Besides, how good the brand is, it is only a detail that can be distinguished by some professionals.

3.And for most of our companies that pay attention to practical performance, it is better to carefully consider the brand, at this time, although he is in line with the psychology of the Chinese name-by-name, but it must be really used by the clan. There are also many brands of dense shelf products that pay special attention to the design of appearance, high intelligence and other characteristics, and there will be common sense mistakes, spending more money does not mean that you can buy good dense shelf products.

When we buy dense shelves, we don't know what are the disassembly and assembly methods, the above article is about the dense rack disassembly and assembly methods, and how to buy dense shelves.