After installing win7, I can t connect to the campus network

Here's how to fix it:

1. First of all, you need to automatically obtain the IP and right-click the local connection.

2. Click Properties, then double-click Internet Protocol (ICP IP) or IPv4.

3. At this time, you can automatically obtain IP and DNS.

4. Then enable network discovery to start the feast.

5. Select Network & Internet in the Control Panel.

6. Click on Network & Sharing Center, then Advanced Sharing Settings.

7. Finally enable network sharing.

The specific steps are as follows:

1. First of all, click on the network connection sign in the lower right corner of the computer, there will be an exclamation mark when there is a problem, and it will show that the network is not recognized, and there is no Internet link.

2. Then click Change Adapter Settings on the left.

3. Open the local connection and set it up.

4. Click on the properties in the three options below.

5. Then find the option with IPv6, remove the previous checkmark, and click OK.

6. At this time, go back to the page in step 4 and click Disable.

7. At this time, double-click the local connection to start, and you can generally access the Internet, if you are afraid that you can put the IPv6 checkmark on again, and you can also access the Internet like a letter dust.

After confirming that the browser is completed, open the browser first, and then click on the browser's tools - Internet options - connection - LAN settings respectively.

If you are using Internet Explorer, remove the tick ( ) before using the ** server for LAN.

Then we can refresh the browser again, or close the browser and restart the computer, and then log in to the campus network again.

Question: I can't get this thing down.

First, connect the network cable between the server and the client, either directly through the switch or with a crossover cable, and set the IP address of the server, such as the one I set.

The compressed package, after unzipping, should have four files:

In the privacy section, change the use of local mac to use random mac; Click on the wifi details, switch the IP setting from automatic to manual (i.e., DHCP to static), and start to modify; Turn off the wifi and turn it back on; Contact the departments of the complex campus network on campus.

The problem that the campus network cannot be connected, but usually in the following two situations: Unable to obtain the IP address; Unable to jump out of the authentication page (connected, but unable to access the Internet, need to be authenticated by the collapse fiber) (wifi status will tell you which situation it is). Workaround:

Target: Method 1: Change the use of local MAC to the use of random MAC (switch between them) in the privacy column.

Method 2: Click on the wifi details, switch the IP settings from automatic to manual (i.e. DHCP to static), start to sell imitation modification, the following provides a modification scheme, IP address, sub-close mask shirt Sun code if needed), router, if there are other defaults, store, reconnect. Disconnect again, switch back to automatic (DHCP), and reconnect to the campus network.

For the first case: you need to know the IP address of your campus network, and manually open the authentication page from the browser. In addition, the easier way is to turn off the wifi and turn it on again, or turn it off and on again.

If none of the above methods work, you will need to contact the department in charge of the campus network of the school.

The following steps can be used to resolve the campus network connection:Tools: Lenovo laptop E460, Windows 10 system.

1. Right-click on the computer screen to open the Slim Control Panel, click Network & Sharing Center, and click Set up a new connection to Zhaoshan or Network.

2. Click the workspace you are connected to and click Next.

3. Enter the server address of the school in the red box and click Create.

4. On the Network and Sharing Center page, select Change adapter settings, right-click Properties.

5. Click Security Options - select the type as the Layer 2 Tunneling Protocol (12TP IPsec) using IPsec - the data plus password type is optional encryption - check the unencrypted password in the Allow the use of these protocols, and click OK.

6. Dial-up connection, enter the student number and password, and click to connect to the network.

Campus network is the standard configuration of every university, once the campus network is not connected, every student's heart will be very anxious, want to see the best but reluctant to use their own precious traffic, I don't know how to be good, today for you to solve this problem.

01 The first step is to turn on the mobile phone, start [WiFi Management], the mobile phone is scanning for the WiFi signal that can be used on Friday, after the scanning is completed, select the name of the campus WiFi, and click [Connect].

02 Wait for the connection to be successful, you will enter the "WiFi Authentication Page", because the campus network is mainly for students and teachers, after the connection, the login authentication page will automatically pop up, click on the pop-up page.

03 Enter your password, and check "Remember password" to log in directly next time. It is important to note here that and the format of the password. The initial is generally your own student number, and the password is generally the last six digits of your ID number.

04 Generally, it can be connected, but sometimes there are a large number of people connected, and there will be a situation where you can't log in, and you will be stuck on a page, and a ** will appear on the page, prompting loading, but it can't be loaded.

07 At this time, a new login interface will pop up, you need to enter the password again, the left side of the login interface will prompt the form of password, such as: w19900221, click [login], you can go to the prompt login success interface.

1. Right-click on the network on the desktop and click Properties.

2. After opening, click on the adapter settings on the left.

3. Right-click the wireless network card and open Properties.

4. Find IPv4 and double-click to open it.

5. Set up automatic IP acquisition and DNS automatic acquisition. Click OK.

1. First turn on the computer, find "My Computer" on the desktop, and right-click.

2. Then click "Properties" at the arrow to enter the system interface and click "Control Panel Home".

3. After entering the main page of the control panel, you can see many setting items, and you can see "Network and Sharing Center" in the box.

4. Click the "Network and Sharing Center" button, the interface is shown in the figure below, and you can see the "Change Network Settings" column.

5. A window will pop up on the right side as shown in the figure below, click the "Connect" button at the arrow.

6. Next, enter the username and password (campus network account name and password), and click "OK" at the arrow to start connecting to the campus network.

Set the local connection to automatically obtain the IP address, and then go to open the IP address given by the school, which has the wide opening of the campus network.

Set your local connection to automatically acquire an IP address.

You have to change the physical address, but you also have to change the IP address. Find the local connection, click Properties, then click Configuration, then click Advanced, then click Network Adress is the physical address, and then enter the physical address corresponding to the account, and you can confirm.