What to do if the wooden floor is always oily after waxing

1. The wooden floor of the basketball court should not be waxed.

The coefficient of friction of sports wood flooring.

There are strict requirements and regulations on the surface, if the ground is raised, the newly installed floor should also be waxed and maintained? Not really. The surface of the board is too smooth, and the athletes in the process of sports, due to the low friction coefficient, can easily lead to foot slippage, which affects the normal performance of the competitive level, and may also slip and fall accidents in serious cases, so the maintenance of the sports venue that has just ended can not be waxed.

2. Paint the wooden floor of the basketball court.

The wooden floor of the basketball court should not be waxed, but the wooden floor of the basketball court can be painted with anti-corrosion protective paint. Professional sports wood flooring manufacturers will not only purchase solubility.

Higher water-based paint.

And the shabu-shabu process will not be stolen. According to the actual needs, brush a few times when you should brush it. Basketball court wood floor painting can protect the surface layer of wood and prolong the service life of sports wood flooring, so in order to slow down the rate of wear and tear of sports flooring, laminate flooring.

The anti-slip and abrasion resistance is necessary for the maintenance of the wooden floor panels of the basketball court.

Waxing steps for wooden floors:

1. It is necessary to see what the weather is on the day of construction, it is best to avoid rainy days or weather with relatively low temperature, too high humidity is easy to produce white turbidity, and the temperature is lower than 5 degrees Celsius The floor wax is easy to harden, which is not conducive to construction.

2. Prepare the tools required for construction, if there is no waxing machine, then you can use simple tools such as dust push, soft cloth, etc., do not look at the simple tools, but the waxing effect is not necessarily bad, but may be more detailed.

3. Stir the floor wax evenly, then use a clean rag or special waxing dust to fully dip the wood floor wax, and carefully apply it in the direction of the wood grain of the wood floor, not too fast, do not miss the coating or uneven thickness, and keep the thickness even.

4. Before waxing the floor, the furniture should be tidied up, and every position of the floor should be evenly waxed, and the floor area should be cleaned to ensure that there is no dust or other dirt before waxing to prevent the finish of waxing.

How to Operate:1First of all, the area to be waxed is thoroughly and carefully dusted, and the dust sprayed with dust pulling agent in advance is pushed back and forth repeatedly.

2.Use a damp cloth dipped in all-purpose cleaner to treat the dirty areas on the floor.

3.It is used to dust the area to be waxed again with a rag to ensure that the ground is free of any impurities.

4.Fill the wooden floor wax into a watering can and spray it on a clean floor.

5.Do not spray too large an area to prevent the wax from solidifying.

6.The operator starts the polishing machine, adjusts the height of the polishing pad, and polishes the polishing line by line from the inside to the outside.

Care Methods:1After waxing, the wooden floor should be dusted frequently.

2.If the floor part is seriously polluted, it can be cleaned locally with a neutral all-purpose detergent.

Wood flooring is now a kind of flooring material that many people will choose when decorating their homes, because it is made of wood, so after a long time, it will inevitably rub and fluff, lose its original luster, and look much duller. Moreover, if it is exposed to the sun or soaked in water for a long time, it will also cause the wooden floor to deform and break. Therefore, we can usually do several times to take care of the surface of the wooden floor to prolong the service life.

There are generally two types of care, waxing and oiling, so which one is better?

In terms of effect, the wood floor will be better oiled, and the wood floor has a special wood oil essence that can be used. It has strong penetration and long-lasting brightness, and will form a protective film on the surface of the wooden floor, deeply moisturizing the wooden floor, so that the wooden floor is not easy to crack and deform, and the same as new. Waxing can only make the wood floor shiny, and the floor wax will also seal the gaps in the wood floor, making the floor less breathable and making the floor easy to deform.

It is difficult to maintain wooden floors with essential oils, and the cost is not high, and it also solves the lack of wax.

Playing wood oil can moisturize and protect the wooden floor, so that the wooden floor is not easy to crack and deform. In order to protect the shine and longevity of the wooden floor, wood oil can be applied at the beginning of use.

You can apply wood oil once a month, and after a year of continuous use, there is no need to apply oil again due to the formation of a protective film on the surface of the wooden floor. Wipe the floor with a semi-dry rag before oiling, and the wood oil should be evenly applied to the floor so that it soaks. Once it has dried slightly, wipe the floor back and forth with a soft, dry cloth until it becomes smooth and translucent.

1. After installing the new floor, do not open the window for ventilation within a day, and do not wipe it with a wet mop. Avoid moisture entering the room, because if the moisture is too heavy, it will cause damage to the new floor, cause deformation, etc. It can be wiped with a vacuum cleaner or towel.

It is strictly forbidden to wipe with acid or alkaline organic solvents to prevent corrosion and abrasion of the surface coating.

2. Be sure to avoid contact with sharp and flammable things, especially dangerous goods such as cigarette butts, which are easy to cause irreparable harm to the floor.

3. In the case of turning on the air conditioner or heating for a long time in winter and summer, you need to use a humidifier or put a basin of cold water in the room to increase the humidity of the air and prevent the floor from drying out.

4. If the room on the floor is sunny and the sunlight is strong during the day, be sure to close the curtains to avoid warping the floor due to high indoor temperature. In addition, it should be noted that for a month after the installation of the flooring, try not to turn on the underfloor heating.

1. Waterproof.

As we all know, wooden floors are very afraid of water, so we must pay attention to avoid water accumulation, close doors and windows on rainy days, and prevent rainwater from hitting the wet floor, resulting in deformation and bulging.

If you accidentally suffer from a large area of rainwater soaking, you should use a dry cloth or mop to blot it in time, open the window to let the air out, let the floor dry naturally or use the cold air stall of the hair dryer to dry, not dry with an electric heater or expose to the sun.

2. Cleaning method.

When cleaning the solid wood floor, it is recommended to wipe it with a semi-dry non-dripping rag or a washing plate mop, not directly with a mop containing a lot of water, and do not wipe with organic solvents such as acid, alkali or gasoline.

If you encounter stubborn stains, you can buy a special cleaner for wood floors to wipe them, and then clean them with a wrung out rag or cotton mop.

3. Maintain indoor humidity.

You can place a humidifier in the room to increase the humidity appropriately to avoid the room being too dry and causing the floor to dry out and age, and reduce the lifespan.

4. Fire prevention. Do not throw flammable and explosive items such as unburned cigarette butts and match sticks on the ground, and do not touch open flames or place high-power electric heaters on the floor.

5. Damage prevention.

The wear resistance of solid wood flooring is relatively poor, and sharp objects such as metal sharps, glass porcelain tiles, and shoe nails should be avoided from scratching the ground. Wear soft-soled slippers or walk barefoot on the floor, and place an insole at the door to avoid bringing sand or rubbing dust to the floor. Heavy furniture should not be dragged directly on the hardwood floor, and soft protective pads can be attached to the feet of the furniture to prevent scratching the surface of the floor.

In case of accidental scratches, lighter marks can be treated with flooring oil or polishing wax.

6. Anti-solid liquid.

Sprinkle red wine, drinks, fruits and other juices on the floor, and wipe them directly with a damp rag. Special stains such as oil stains and paint need to be cleaned with professional stain remover oil. If the gum is on the floor, it should be cooled and shrunk with ice cubes, scraped off with a knife, and then wiped off with a damp rag.

7. Regular waxing maintenance.

After using the solid wood floor for a long time, the finish will be reduced, so it is recommended to wax and maintain it 1-2 times a year. Wipe the floor clean first, dip the rag with floor wax, evenly apply it to the surface of the floor, and after it dries slightly, wipe it with a soft cloth.

The general maintenance of solid wood flooring is in the form of waxing, which is good for the longevity and life of solid wood flooring.

Solid wood floor maintenance is very necessary, can protect the floor and prolong the service life of the floor is also beautiful, oiling or waxing can be, but do not pay attention, if you choose to oil, then you must always keep oiling, choose waxing must always be waxed, can not be cross-used, this maintenance oil, and then the next maintenance and waxing, because the composition of oil and wax is not exactly the same, there will be a reaction, affect the effect, it is very troublesome to deal with.

The maintenance of solid wood floors requires frequent waxing and oiling. Solid wood flooring has high requirements for paving, and once it is not paved well, it will cause a series of problems, such as sound. If the indoor environment is too humid or dry, hardwood flooring is prone to arching, warping or deformation.

After the paving is done, it is necessary to wax and oil frequently, otherwise the luster of the floor surface will disappear quickly.

In order to maintain the aesthetics of the solid wood floor and extend the service life of the lacquer. Wipe the floor clean before waxing, then apply an even layer of floor wax to the surface, and wipe with a soft cloth after a little drying. until smooth and bright.

If a large area of water is accidentally flooded or partially soaked in water for a long time, if there is open water retention, it should be blotted dry with a dry cloth in time and let it dry naturally, and it is strictly forbidden to use an electric heater to dry or expose it to the sun.

Prolonged exposure to strong sunlight, or the sharp rise and fall of the temperature in the room may cause premature aging of the paint surface of the solid wood floor, which should be avoided as much as possible. If the installation is completed, it will not be lived in for the time being. To maintain indoor air circulation, do not cover it with plastic paper or newspaper, so as not to make the surface paint film sticky and lose its luster for a long time.

First, you can use mineral oil to clean the floor. Pour mineral oil over the cloth and wipe the floor with the cloth. Pay attention to detail when wiping, and the special wheel is to wipe the dirtier areas thoroughly.

This method requires a longer period of care, but care should be taken when using it.

Second, solvents can be used to clean the floor. Use a pro-cloth to apply to the floor surface and wipe it off. Be careful when using transitions, as the transitions in the process should be slow, halfway in circles. This prevents discoloration of the floor and amplifies any areas of damage.

Third, if you've used solvents and mineral oil and still can't clean off the wax, you can try using vinegar to clean the floor. Dissolve the vinegar in warm water at a prepared concentration of 1:10, then wipe the floor with a cloth dipped in the liquid.

In short, the above methods can help you solve the problem of excessive waxing on wooden floors. Be careful when using these square families. Choose the one that suits you best in order to fully restore the floor.

Waxed floors need frequent maintenance and cleaning to keep them shiny and beautiful. Here are some common ways to deal with it:

1.Clean regularly: Clean the floor with a soft carpet or mop to remove dust and dirt.

Specific floor cleaners can be used, but you need to know if they can be used on waxed floors. Do not use a stiff brush or mat to clean the floor, as this will scratch the surface and weaken the protection of the wax layer.

2.Rewaxing: If the floor starts to lose its light and hail, it needs to be re-waxed.

Before rewaxing, the floor needs to be thoroughly cleaned to ensure that the surface is clean, otherwise the new wax layer will be unstable due to the attachment to the old wax layer. Choose the appropriate wax product and wax the floor according to the manufacturer's guidelines.

3.Removal of wax layers: If there is too much wax layer accumulated on the floor, it needs to be removed first and then re-waxed.

Wax layer removers can be used, but care needs to be taken to avoid scratches and damage to the surface. You can choose to have the remover handled by a professional to ensure safety and effectiveness.

4.Repair scratches: If the floor is scratched or damaged, it needs to be repaired before waxing to keep the surface flat and beautiful.

Scratches and damage can be filled with a floor repair agent and then waxed. It is necessary to select a restorative that matches the color of the floor and follow the manufacturer's guidelines.

In short, waxed floors need to be maintained and cleaned frequently to keep them shiny and beautiful. If rewaxing or removing wax layers is required, choose the appropriate product and method and handle it carefully to avoid surface damage. If the floor is scratched or damaged, it needs to be repaired before waxing to ensure that the floor surface is flat and beautiful.