If you want to change the lights of a new car, will it have an impact on the warranty

Changing the headlights of a new car will affect the warranty of the headlights, but will not affect the warranty of other aspects of the vehicle.

According to Article 30 of the Provisions on the Liability for Repair, Replacement and Return of Household Automobile Products, during the warranty period and the validity period of the three guarantees for household automobile products, if one of the following circumstances exists, the operator may not bear the responsibility for the three guarantees stipulated in these provisions for the quality of the products involved:

1) The household car product purchased by the consumer has been notified in writing that there is a defect;

2) Household automobile products are used for leasing or other business purposes;

3) The instruction manual clearly states that it must not be modified, adjusted, or disassembled, but the consumer modifies, adjusts, or disassembles it on his own, causing damage;

4) Where product quality problems occur and consumers improperly dispose of them and cause damage;

5) Damage caused by consumers failing to properly use, maintain, or repair the product in accordance with the requirements of the instruction manual;

6) Damage caused by force majeure.

Modified lamps are not warranted, but do not affect others, such as the engine.

Will The headlights will not be covered after the modification.

With the popularization of car culture, many car owners want to modify their vehicles with some personality, but for car owners who are still in the warranty period, it should be noted that many manufacturers do not guarantee the modified vehicles.

1. The modified vehicle is not completely without warranty: of course, the so-called non-warranty parts here are limited to the modified part, for example, if your car has changed the circuit and audio part because of the replacement of GPS or audio, then the circuit and audio part will no longer enjoy the manufacturer's warranty policy, and the rest will continue to enjoy the warranty.

2. If you change it, you won't guarantee it, and other places still enjoy the warranty: if there is a manufacturer who does not guarantee the whole vehicle because of your modification, then the owner has the right to sue the dealer or manufacturer to protect their legitimate rights and interests.

3. It is very important to safeguard their own legitimate rights and interests: with the enhancement of our legal concept, the protection of legitimate rights and interests is no longer empty talk, as the first one, we are very happy to see that the people can stand up to protect their own rights and interests, at the same time, we also hope that the manufacturers themselves can also be self-disciplined, and at the same time earn profits, more for the end users to consider.

It doesn't have much impact on the car, but the grip will have an impact on the surrounding cars, and a large number of headlights will still affect the sight of the opposite car

1. During the annual inspection, the appearance of the vehicle must be the same as that on the driving license, and the modification that changes too much cannot pass the annual inspection. However, the modification of the lamp is only the modification of the inside of the lamp, as long as the light irradiation meets the regulations, it will not have an impact;

2. As we all know, everything has a service cycle, and the lights are no exception, which will be normal and aging, resulting in dim lights, and some of the lights used are of good quality and lack of lights. Whatever the reason, as long as the light brightness is insufficient, it will not be able to pass the annual inspection;

3. The annual inspection of the brightness section of the headlights stipulates that the low beam shall not be less than 1050 lumens, and the high beam shall not be less than 1450 lumens. However, if the brightness of the lamp bulb used is too high, it may also lead to the failure of the annual inspection.

Regarding the landlord's concern about "what is the impact of changing the lights on the car?" "Here's my personal opinion:

If you change the hernia, with hernia package insurance, it will not affect the car circuit, it is recommended that you go to a professional cave Zen modification shop, and the car must be changed back to the original car lights:

1. The modified xenon lamp must add a lens, preferably a double-light orange key lens, in addition to the lens itself has the role of concentrating, the bifocal lens has 2 light types at the same time, which is equal to 2 lights to 4 lights, and the brightness will be greatly improved;

2. The color temperature of the headlamp is not higher than 6000K, and the color temperature of the light exceeds 6000K during the annual inspection, which will affect the annual review; Moreover, the color temperature of the xenon lamp is higher than 6000K, and the color of the light is blue, which will easily cause fatigue for the eyes of the person and affect the spirit of the driver;

3. Car bulb lumens, low beam light can not be less than 1040 lumens, high beam can not be less than 1540 lumens, as long as the lumen of xenon lamp can reach this brightness, the brightness of the car lamp is qualified.

The hazards of car lamp modification are as follows:

1. If you think that the current car lights are not bright enough, then you are now using the original car halogen bulb that was equipped with the car when it left the factory. The bulb is generally 55w, if it is in the urban area is generally enough, if you go on the high-speed, run long-distance, the higher requirements are not enough. The lights can be changed, and many people change them now;

2. In order to improve the brightness, there are now two methods, one is to replace the high-power lamp brigade bubble, just like the one upstairs said, use 100W high-power bulbs, but I want to Yan Zhenbi also know that the 100W halogen bulb bulb is too power-consuming, one on the left and right is 200W, and two on each is 400W, which is very, very high pressure on the car battery;

3. The luminous efficiency of LED lamps is relatively high, which is more than twice that of fluorescent lamps. However, if we use household energy-saving lamps to compare, it can save about 1 time energy compared with incandescent lamps, and energy-saving lamps can save more than three times energy compared with LED lamps. The same is true for car use, the same daytime running lights, LED energy consumption only accounts for 1 20 halogen lamps, and the current cost of LED is also declining year by year, according to statistics, the ** LED light is reduced by 20% every year;

4. At present, the average life of automotive LED lights can reach more than 50,000 hours, and some well-known lighting manufacturers can provide LED components with a life of more than 100,000, which is equivalent to eleven years without replacing the bulbs. The structure of LED lights is very simple, its impact resistance and shock resistance are very good, there is no need to worry that the bulb will be easy to break, and it can adapt to various harsh environments;

5. The spectrum of LED lights has good monochromaticity, no excess infrared rays, ultraviolet lamp spectrum, neither heat nor radiation, small glare, and waste can be **, no pollution, no mercury elements, can be safe to touch, and belongs to a typical green lighting source. Small size, light weight, using its characteristics can be designed thin, light, compact all kinds of lamps and lanterns, to provide space for car styling design. The LED headlights are encapsulated by resin, which is not easy to break, easy to store and transport.

Millions of car purchase subsidies.

Modified lights have no effect on the car, but it may affect the annual review. First of all, your lighting change must meet the following requirements:

1. Astigmatism is prohibited. The best solution to change the light is to add a bifocal lens, the modified light will not be dazzling or astigmatism, and will not affect the safe driving of others;

2. The height of each car is not the same as that of hand-attacking, so adjust the angle of the light to avoid affecting the safe driving of others;

3. The low beam is not less than 1050 lumens, and the high beam is not less than 1450 lumens;

4. The light intensity of the driving vehicle is not less than 15000cd and not higher than 120000cd;

5. The color temperature is required to be no higher than 6000K, otherwise the annual inspection equipment will not be able to detect the light.

Regarding the annual inspection of automotive lights, in fact, it is not difficult, to meet or not exceed the annual inspection requirements, mainly in the following three aspects.

The color temperature cannot exceed 6000K. The light detection instrument of the motor vehicle monitoring station can only detect the light source of the color pie tease temperature below 6000k, if it exceeds this value, the machine will not be able to detect, and it will naturally not pass the annual inspection. And more than 6000K xenon lamp, the color generally begins to gradually turn blue, the appearance looks cool, but the illumination effect is not ideal, in case of rain and fog, there is almost no penetration.

This is one of the reasons why large manufacturers such as Philips and Osram do not promote more than 6000K automotive front lighting products. Therefore, when upgrading xenon lamps, you should choose products with a color temperature between 4200 (4300) K and 6000K.

<> click Enter a description.

2.The light source diverges.

China's road traffic safety law stipulates that "the vehicle shall not affect other road traffic participants when driving". If only LED bulbs (we commonly call bare bulbs) are selected when upgrading the lights, and no lenses are added, then the lights will diverge, seriously affecting the vision of oncoming drivers and pedestrians on the opposite side, which has a great impact on road safety. This is also why some netizens have installed LED bare light bulbs, and at night on the road, they are always sold by the opposite car dust and turn on the high beams, because the opposite vehicle thinks you have turned on the high beams, and he doesn't flash who you flash, (

Moreover, the LED bare bulb looks good when lit, but because of the light divergence, the actual illumination effect is not up to the ideal value at all.

<> click Enter a description.

3.The brightness is too low.

This situation basically only occurs on older cars that are more than 5 years old. The light bulb will also age and decay, and after a few years of use, the brightness of the bulb (in lumens) is even lower than the minimum standard of 1200 lumens for annual inspection, and the annual inspection will not pass. The lumen on the market are basically between 3000 and 10000 lumens, so there is no need to worry about this.

As shown in the figure below, the lumens of Philips 5000k+ custom sea 5 lens can reach 6520k (652*10).

<> click Enter a description.

Therefore, to sum up, as long as you choose the right product, you don't have to worry about not passing the annual inspection.

Does the change of the headlights affect the review of the car The following conditions of the modified headlights will affect the review of the car: 1. Astigmatism is prohibited. The best solution to change the light is to add a bifocal lens, the modified light will not be dazzling or astigmatism, and will not affect the safe driving of others; 2. The height of each car is different, so adjust the lighting angle to avoid affecting the safe driving of others; 3. The low beam width is not less than 1050 lumens, and the far Zen cherry light is not less than 1450 lumens; 4. The light intensity of the driving vehicle is not less than 15000cd and not higher than 120000cd; 5. The color temperature is required to be no higher than 6000K, otherwise the annual inspection equipment will not be able to detect the light.