How to easily divide rolls of pearl cotton with simple tools

The answer on the 2nd floor is correct, I will add: use a straight heating wire (for soldering iron and electric heating rod, sold in larger electronic stores), below 100w, make a simple device, similar to a gate knife, make a bow back shape with insulating materials (such as plastic), make a bow back shape with an electric heating wire, and use the whole bow as a gate knife body, requiring this bow to be able to open and close freely, and there is no left and right displacement. After the power is on, the whole roll of pearl cotton is sent to the gate knife according to the required size, and the bowstring is pressed down like a straw, and the cotton is heated and melted after the bowstring is in contact with the cotton, and the heating wire stops as soon as it leaves the melting, and the bowstring is gradually pressed down, and the whole roll of cotton is neatly separated after the end.

This method is used in sponge mattress and sofa making workshops, and the effect is very good.

Simple EPE cutting tools are made as follows:

1. The market buys special nickel-chromium electric heating alloy wire, which has the advantages: higher high-temperature strength than iron-chromium-aluminum, not easy to deform under high-temperature use, power, wire diameter;

2. Length selection: according to your own needs, if the heat is large, lengthen the heating wire, and reduce the length on the contrary;

3. Fix it on an iron frame (the shape you want) and build a few points on the iron frame;

4. Connect several points with an electric heating wire, and the iron frame cannot be directly connected with the heating wire;

5. Use ceramics to insulate, with good high temperature resistance;

6. The two ends of the heating wire are connected to the 220V power supply, and it is best to add a manual switch to make it easy to use;

7. If you can make a countertop, it is better and easy to operate, the size is 110*77cm, and the height of the working surface is 83cm;

Note: The furnace wire is too thin and easy to break at high temperatures, and the temperature drops too much after contact with the foam, which is not easy to operate. Be sure to operate it safely.

Why don't you cut it? I have finished products wholesale and processed wholesale.

Use a vertical cutting machine or a horizontal and vertical slitting machine Ordinary use a vertical cutting machine, don't waste materials and labor on the line, the horizontal and vertical slitting machine is the last two pieces just came out, the machine is relatively high, it is not recommended to buy directly, first use a simple machine to do it.

You can consider buying a special cutting machine for EPE, there are more than 60,000 pieces on the market, the cutting thickness is up to 8cm, the table top can be basically customized, what kind of graphics are needed to be made on the computer, and the cutting machine will be automatically cut.

Isn't it OK to buy a punch press and make a knife mold of the size you want. Or just ask the EPE manufacturer to cut it for you directly and add some money

Our factory also uses a knife to cut pearl cotton sheets, and if there is a good way, tell me.

It is now possible to cut with a pneumatic knife.

Cut by hand with large pieces, or make abrasives and punch with punches.

Let's learn together, in which direction is it good to cut?

Cut a little well with a horizontal and vertical slitting machine for pearl cotton. However, I also have a Hengxiang cutting machine in my own factory, which is easy to use, I recommend you to take a look.

Pearl cotton foaming machine is used in the production of pearl cotton, pearl cotton thickening machine is used for composite thickening, pearl cotton laminating machine is used for pearl cotton lamination, pearl cotton granulator now has a single screw granulator, 200 kg per hour, high output, cost saving, you can take a look.

Laizhou Jinlida Machinery is specialized in pearl cotton production and processing machinery, and has a special pearl cotton cutting machine. It is advisable to visit the site before making a decision.

If the cutting machinery has environmental certification, it must be produced by a famous brand enterprise. For example, Guerqi, I personally feel that machinery and environmental protection do not seem to have much to do with it, you can ask which brand of peers is good, the main thing is durability, and the follow-up service can keep up.

It is the CO2 laser cutting machine to cut the pearl cotton material, and there are many manufacturers of this model.

Hello, we are Changzhou Mingyi Environmental Protection Technology ****, specializing in the production of pearl cotton, our partners to the drawings are usually CAD format, concise and clear, convenient for our proofing master to operate. There are also pdf ones that are used for general simple product drawings. Hope it helps.

Directly with line drawings and descriptions.

If possible, it is best to give the 3D and 2D drawings together to the ** business reference. This material is a material that we use a lot.

The designers of the SSK passed by.

There are many kinds of software that can be used, but CAD is still the most used.

What software is there to see what the design requirements, the general drawings like CAD can be completely completed.