I installed a new network card, why can t I connect it all the time?

Nonsense: Just reinstall the network card driver.

Summary. My computer has a new network card, but I just can't get on the Internet, what happened? Hello, the computer has a new network card, but can not access the Internet, it proves that the driver of your new network card is not installed, or you are not installed the latest network card driver, it is also possible that your network card and the network card slot of the desktop computer are not plugged in, you can unplug it and re-observe, and then set an IP address, combined with the environment where you are located, after setting your IP address, restart the computer to access the Internet.

My computer has a new network card, but I just can't get on the Internet, what happened?

Good. My computer has a new network card, but I just can't get on the Internet, what happened? Hello, the computer has a new network card, but can not access the Internet, it proves that the driver of your new network card is not installed, or you are not installed the latest network card driver, it is also possible that your network card and the network card slot of the desktop computer are not plugged in, you can unplug it and re-observe, and then set an IP address, combined with the environment where you are located, after setting your IP address, restart the computer to access the Internet.

You say be specific.

Hello pro may be that your network card does not automatically install the driver by itself, desktop my computer --- right-click --- properties --- device manager, click to see the "network adapter" below the item will lead to a network card (display model) in front of the question mark: 1, if there is a network card driver is not installed: right-click it --- update the driver; 2. If not, it means that your network settings are not set up, or if you don't have a network card, it means that your network card is not plugged in, I hope it can help you.

<> the computer can't start normally after changing the new network card, which is because the network card driver does not match.

1. First of all, you must determine the model of this computer, and whether the system is 32-bit or 64-bit. Open Rock.

3. Extract the file and click on the steup. Run and install.

4. Then restart the computer to access the Internet.

<> the computer cannot boot normally after changing to a new network card, this is because the network card driver does not match.

1. First of all, determine the model of this computer, and whether the system is 32-bit or 64-bit.

3. Extract the file and click on the steup. Run and install it in the Royal Loss Sales Bank.

4. Then restart the computer to access the Internet.

There can be many reasons why your computer can't connect to the network when it's plugged in to a wireless card. Here are some suggestions for your reference:

1.Check the Wi-Fi driver: Make sure your computer has the correct Wi-Fi driver installed. You can access the device manufacturer's official and up-to-date drivers and follow the instructions to install them.

2.Whether the wireless switch is on: Make sure that the wireless network switch on your computer is on. Some computers have a physical switch that needs to be turned on. Some computers use a key combination on the keyboard (e.g., FN+F5) to turn on the wireless network.

3.View wireless network settings: In the Windows operating system, you can view wireless network settings through the Settings app.

In macOS, you can turn on the "Network" option in System Preferences. Check the list of wireless networks to make sure they include available networks. Sakuraeda.

4.Disable wired connections: If your computer is connected to both wired and wireless networks, try disabling wired connections to see if the wireless network works.

5.Restart your computer: Sometimes, restarting your computer can fix some temporary issues. Try shutting down your PC and then restarting it.

6.Check the wireless signal strength: Make sure that the distance between your computer and the wireless router is moderate, not too far. If possible, try using a wireless network close to your router.

7.Restart your router: Try restarting your wireless router, then try connecting to your wireless network again.

9.Reset Network Settings: In Windows, you can reset your network settings through the "Reset Network Settings" feature in "Network Settings".

In macOS, you can reset your network settings through the "Network Reset" feature in System Preferences.

10.Check for hardware issues: If none of the above methods can solve the problem, then there may be a hardware problem with the wireless network card itself.

You can try installing the wireless card on a different computer to test it. If the problem persists, then you may need to replace your wireless card.

Install the Driver Wizard with the wireless card driver.

There are diagnostics in it.

Wiring and routing issues can cause the wireless network to be automatically disconnected.

1. Check the quality of the line first, including the first line and the power cord, to see if there is any poor contact, and the quality of the wire should also be selected as much as possible.

2. Whether the voltage is stable, and whether there is electrical equipment with flat start, large load and strong radiation nearby.

3. Whether the quality and voltage of the power adapter meet the requirements, if possible, change it to see.

4. Whether the disconnection occurs is easy to occur when answering the first time, you can judge whether there is a problem with the quality of the distributor and the wiring method, and you can replace it.

5. If there is no problem above, there is only a suspicion of routing quality problems, which cannot be repaired, you can find a routing to replace it to see if there is any improvement.

Signal transmission and network card problems may be the reason for the automatic disconnection of the wireless network, if the above reasons can be ruled out, it can only be a problem with the setting method.

Look at the situation,I think the network card can't be connected,It's a certain problem with the motherboard inside.,So it's recommended to just exit.,Re-enter it later.,See if it's okay?

Not being able to access the Internet is not necessarily a problem with the network card, there are many situations, further testing is needed to know that the fault point appears in **, and then according to the scope of the fault point to troubleshoot, the test method is as follows:

1. Set up the dial-up connection according to the requirements of the operator, connect the stand-alone device to the operator's optical modem, and ping the operator's gateway or DNS server address after dial-up the Internet;

2. If the ping is not working, it means that the operator's external network network is not connected, just call ** to find the operator to report for repair;

3. If the ping means that the external network network is normal, it has nothing to do with the operator's network, and the fault is on the router, restore the router to factory settings, and then reset it to eliminate the fault.

Disable the integrated NIC on the motherboard BIOS.

Delete the previous NIC driver, restart and install the NIC driver.