What materials should be used to make up for leakage in floor joints?

Floor cracks and leakage, it is best to use silicone waterproof material BXHT super waterproof glue to fill the leakage. One is that due to the unique structure of silicone, it has the properties of both inorganic and organic materials, and has surface tension.

It has the basic properties of low viscosity temperature coefficient, high compressibility and high gas permeability, and has excellent characteristics such as high and low temperature resistance, oxidation stability, weather resistance, flame retardancy, water repellency, corrosion resistance, non-toxic and tasteless, and physiological inertness, among which silicone is mainly used in sealing, bonding, coating, waterproof, moisture-proof, etc. With the continuous growth of the number and variety of organic silicon, the application field continues to expand, forming a unique and important product system in the field of new chemical materials, especially in the application of waterproof industry.

The second is due to reinforced concrete.

Determined by its own characteristics, if you choose to use rigid JS waterproof coating.

And the method of grouting is easy to burst, and the weather resistance is poor, if you do not do another protective layer, there will be water leakage in three or five years, or even shorter. Once cracks occur in concrete, the cracks will continue to expand and grow, and the thermal expansion coefficient of rigid materials.

It is inconsistent with cement concrete and can easily crack.

There are many common ways:

1), pour water thoroughly at the leakage, buy a bucket of waterproof paint and pour it on the leakage (only use waterproof waterproofing), and after drying, pour waterproof and cement in a ratio of 1:2, and mix and pour it on the leakage. It works great.

That's what it's done in a short-term way.

2) Floor leakage is a building defect, mainly because of the weather, cement, improper construction of these three reasons.

The best way to fill the leakage on the floor depends on the cause and degree of water seepage. Here are some possible ways to fill the gaps:

1.Find out the cause of water seepage: First of all, you need to find out the cause of water seepage, such as leaking pipes, roof leaks, wall seepage, etc. Only by finding out the cause can we take the right way to fill the gap.

2.Use waterproofing paint: If the water seepage on the floor is caused by the damage or aging of the waterproofing layer, waterproofing paint can be used to repair it. Before applying, the floor needs to be cleaned and the surface needs to be dry.

3.Use waterproofing membrane: If the waterproofing layer of the floor has been severely damaged, you can use waterproofing membrane to repair it. Before laying, the floor needs to be cleaned and the surface needs to be dry.

4.Plugging loopholes: If water seepage on the floor is caused by leaking water in walls or pipes, plugging agents can be used to plug the loopholes. Before using the occluder in the booth, the surface around the hole needs to be cleaned and made sure that the surface is dry.

5.Replacement of waterproofing: If the waterproofing of the floor is severely aged or damaged, it may be necessary to replace the entire waterproofing layer. This requires a professional to carry out the construction.

It should be noted that the above methods are for reference only, and the specific method of filling the gap needs to be selected according to the actual situation. If you are unsure how to deal with water seepage on the floor, it is advisable to consult a professional.

The best way to fill the leakage on the floor depends on the cause and degree of water seepage. Here are some possible ways to fill the gap:1

Find out the cause of water seepage and fix it. For example, if it's because of a leaking roof, the roof needs to be repaired. 2.

Use waterproof paints or coatings. These coatings prevent water from seeping into the floor. 3.

Install a waterproof layer. This can be a special material, such as rubber or polymer, that can be covered on the floor. 4.

Install a drainage system. If the water seepage on the floor is caused by poor drainage of the bright hole, a drainage system can be installed to solve the problem. 5.

Use sealant. These products can fill cracks and holes with wide key ignition and prevent water from penetrating. 6.

Replacement of floors. If the floor has been severely damaged, the entire floor may need to be replaced. Before choosing a leak repair method, it is best to find out the cause of water seepage and assess the degree of water seepage.

If the water seepage is severe or the cause is not clear, it is best to have a professional check and repair it.

There are several ways to fill the leakage on the floor:

1.Waterproof glue. Use waterproof glue and latex cement to re-seal the floor surface. The effect is better for small areas of trouser wheels with shallow water seepage.

2.Impermeable and insulated. The impermeable material can block the gap in the floor like thermal insulation, and play a role in blocking the penetration of water, which is very suitable for temporary leakage.

3.Grouting sealing. Huimei injects a special concrete slurry into the cracks of the floor by high-pressure injection, and then seals it. However, it is highly professional and requires professional operations.

4 Glued waterproof membrane. Paste the waterproof membrane directly on the surface of the floor, and then fill the leak seal. The result is a waterproof protection that completely blocks moisture penetration.

5.Reinforcement and remediation of pits. For pits or sinking areas with serious water seepage, it is necessary to completely dismantle, rebuild and strengthen the foundation parts, and then carry out Hu Bixin sealing treatment to solve the fundamental problem.

The advantages and disadvantages of the above methods are different, and it is recommended to choose the appropriate method to fill the leak according to the water seepage. To address the root cause, it is best to carry out a careful inspection to find out the cause of water seepage, and then repair and seal the leak.

Water seepage occurs on the concrete floor, generally because there are cracks in the concrete floor, you can use cement glue to repair the cracks in the mixed orange-based concrete, you can effectively prevent the situation of water seepage on the floor, if the water seepage on the concrete floor is more serious, the surface of the water seepage is relatively large, it is recommended to re-lay a layer of 3 4 cm thick concrete soil layer on the floor to prevent the mixed floor from seeping again.

Roof leakage is a relatively common problem, which can be solved by two methods: chemical grouting to fill the leakage and redo the frontal surface to prevent the stove and slow down the water. The specific choice of which method needs to be comprehensively considered according to the actual situation. If the leakage of the seepage town is more serious, it is recommended to use the waterproof surface to do waterproofing, and for the local water leakage, the method of chemical grouting can be used to fill the leakage.

The method of repairing water leakage in the house is as follows:

1. If there is a problem of water leakage in the building, first of all, you need to find out which part of the water leakage, for example, if you buy a house on the top floor, the roof is prone to water leakage, which is basically because the waterproof of the top floor has failed, and you need to prepare waterproof paint or membrane, and you can also re-do the waterproof demand for the top floor by building tiles.

Relatively speaking, it may be easier to apply waterproof coatings, and it can also bring a certain waterproof effect in the later stage.

2. If there is a leakage problem on the wall of the room with the bathroom wall, it is generally because the bathroom is not waterproof, and it may not be found until several years later. We need to do a waterproof remedy for the wall, and the waterproofing should be done all over the wall, especially where the same wall as the bathroom, maybe the decoration company will only do rice. However, after making a full wall, the waterproof effect will be better.

3. There are some problems of local leakage of the wall, basically because there is a problem with the pipe, such as a sand hole or a loose connection, or a rupture of the water pipe. In this case, it is necessary to plug the leak or replace the water pipe with a new one.

Precautions for roof waterproofing and leakage

If the gap in the wall does not widen due to the change of time, it means that the gap is caused by the temperature change, and the glass glue can repair the gap. However, if the gap will become larger over time, then it means that it is a crack in the structure of the house, and it is very complicated to repair, so you need to contact a professional to deal with it so as not to bring safety problems.

When we live in a building, we may be enjoying its convenience, but sometimes there will be some accidents, such as floor water seepage, which can have a great impact on people's lives, if it cannot be repaired in time, it is likely to cause economic losses, then, how to make up for floor leakage? Next, let's find out together!

One way is to knock off the tiles on the ground, deal with the base surface, and do waterproofing again as a whole, and the other way is to check from the ceiling downstairs, find the leakage point, and use the high-pressure grouting method to plug the leakage.

What is the cause of water seepage on the floor.

1. According to the experts of Qeeka Home, the upper and lower pipes are not tightly combined with the floor slab, and they are not treated as an important process during construction. There is no waterproof floor, and although some are done, the height of the waterproofing around the pipe and around the floor is not enough, resulting in leakage.

2. The water casing is too short, not 50mm above the ground as required, so that the casing and riser leakage. The squatting toilet outlet in the bathroom and the leather bowl of the water supply riser are not tightly tied, resulting in long-term leakage.

3. Water leaks downward in the bathtub of the bathroom. These locations are humid all year round, and there is white frost and white hair, which not only affects the aesthetics, but also shortens the life of the building. The cause of water leakage is mostly perennial water accumulation in the low-lying area under the bathtub of the upper floor of the house, which infiltrates the side wall, and then leaks down the lower layer along the foot of the wall, which can be clearly found on the façade of the exterior wall and the side wall of the stairwell.

Conclusion: The above content is about how to fill the leakage of the floor? I hope it can help you. I believe that after the introduction of the content, what will you know about the cause of water seepage on the floor? If you have more understanding, if you have a need in the future, you can refer to it.