Can you mix both types of motor oil?

It is generally not recommended.

If both are fully synthetic oils, it is best not to mix them. There are generally additives in synthetic oil, and different brands of synthetic oil add different ingredients, and chemical changes may occur after mixing, causing the overall engine oil quality to deteriorate, and some even tend to solidify.

The ingredients in mineral oil are relatively single, generally do not contain additives, and after mixing, it is nothing more than a mixture of high and low quality, and there is no abnormal chemical reaction, so it can be mixed in the short term to solve the urgent need.

It is best not to do this, although the first oil is refined by oil, but the other ingredients in different brands and models of engine oil are different, that is to say, each engine oil brand has its own characteristics, if mixed, it may cause oil deterioration, emulsification, resulting in serious motor wear and tear!

The two oils can be mixed together.

The engine oil is made of base oil, but the viscosity index will change, as for the chemical reaction engine oil is anticoagulant and dispersed, it is generally not, and the viscosity is adjusted by itself with the remaining or oil change, so that it is not wasted.

Engine oil is made up of two parts: base oil and additives. Base oil is the main component of lubricating oil, which determines the basic properties of lubricating oil, and additives can make up for and improve the shortcomings of base oil performance, give some new properties, and are an important part of lubricating oil.

You can mix it, but it's not recommended, and if it's for emergencies, you can deal with it. It should be noted that no matter how many types of engine oil are mixed, the oil label and grade need to be consistent

Hello! Although the oil is refined by oil, different brands and models of oil are not the same, if mixed, it may cause oil deterioration and emulsification, resulting in serious wear and tear!

Hope it helps!

It is better not to, it is better to use the same engine oil to avoid danger.

The two oils can't be mixed! It will affect the life of the starting car.

Do not mix different brands and models of engine oil.

Can the oil be mixed? Let's talk about engine oil.

No.

If you need to mix the oil, then you need to see whether the oil is mixed in strict accordance with the mixing principle. It should be noted that mixing different types of engine oil may produce turbidity, due to the different chemical additives of different brands and different types of oil, these chemicals have the opportunity to undergo chemical reactions after mixing, reducing the lubrication effect, and may produce acid and alkali compounds, which can aggravate the corrosion of engine components.

Precautions for the use of engine oil.

It should be noted that when adding lubricating oil, it is advisable to keep it slightly lower than the scale on the oil dipstick. In addition, it is necessary to grasp the type of engine oil, season, climate, engine displacement, technical performance and many other factors. Therefore, it is best to choose a professional car maintenance center, after careful judgment of the car, choose the appropriate engine oil, and carefully operate the maintenance process to prevent hidden dangers.

Of course, the general car maintenance center will not add more oil (cost control), but if it is the oil brought by itself, the car maintenance center will not pay too much attention, so be careful not to add more lubricating oil.

No. The internal additives of the engine oil produced by different manufacturers are different, not to mention different brands of engine oil. From the perspective of use, once mixed, not only may not achieve the lubrication efficiency of any of these brands of engine oil, but also may cause physical and chemical reactions due to the different additives in different brands of engine oil, which will aggravate the deterioration of the engine oil and cause damage to the engine lubrication system.

Therefore, when adding, it is best to release all the original engine oil and add new engine oil. It is recommended to use lubricating oil with higher viscosity in summer, such as 15W W W-50, etc.; In winter, use a lubricating oil with a lower viscosity, such as 5W W-30 or 10W W-40.

Yes, the engine oil is made of base oil, but the viscosity index will change, as for the chemical reaction oil is anticoagulant and dispersed, it is generally not, and the viscosity is adjusted by yourself with leftover or oil change, so it is not wasted.

The mixing of different grades of engine oil will destroy the quality of the engine oil, affecting the performance and life of the engine. Restore the most powerful motor oil to change the car with high-quality fully synthetic engine oil. I now use GT Magic Red oil to maintain my car, and the power is too good to say.

The semi-synthetic engine oil used in the car originally had a stiff throttle and slow power. Now the four types of PAO are changed, the throttle is lighter, the power response is fast, the traffic lights are the first to start, and the car drives very smoothly. And the power decline period is 10,000 kilometers, a little bit of decline, and eventually you can drive to 15,000 kilometers.

The engine oil can not be mixed casually, not to mention the different brands of engine oil, choose a better quality engine oil to change, I now use the GT Magic Red engine oil power and silent situation is particularly good, the car power is particularly good, often run high speed, power without decay. And it is also very quiet to drive, and the liquid molybdenum in the oil is really good for anti-wear.

Can different brands of the same brand of engine oil be mixed with each other, and what are the consequences?

The engine of the vehicle needs to be regularly maintained by the owner, and the oil inside the engine needs to be changed to keep the engine in the best condition.

The mixing of the two oils has a certain effect on the engine of the vehicle.

1. Due to the different models of engine oil, its composition is also different, and the mixing of two types of engine oil together can easily cause chemical reactions.

Corrode the engine of the vehicle and damage various parts of the engine.

2. The two kinds of oil mixed together will also affect the lubricity of the oil, the main role of the oil is to lubricate the gears inside the engine, reduce the engine temperature, when the engine is running, the oil lubrication is not good, the engine gears are dry grinding with each other, which will damage the gears inside the engine and reduce the service life of the engine.

3. If the two oils are of different models, they may deteriorate when mixed together, resulting in sludge, reducing the heat dissipation effect of the engine, and blocking the oil filter element and oil pipeline of the engine.

Different brands and grades of engine oil are added with different additives according to the working characteristics of various engines and the requirements of the working environment, so that its viscosity, wear resistance, corrosion resistance, explosion resistance and volatility are different. ButIt is best not to mix the wiggle, although everyone has the same label, but the additive composition is different between different manufacturers, which leads to the difference in the composition between the two types of engine oilDifferent. The consequence of mild is that it cannot be mixed, and in severe cases, it will even produce a chemical reaction that will cause the oil to fail, thus making the engine moistSlip system failure.

<> car oils can be mixed, but they are not recommended. While oil is made up of base oils and additives, the properties of the oil will vary depending on the base oil and the composition of the additives in each oil. Mixing may cause the following adverse effects:

The oil is cloudy and the quality is reduced. Reduced lubrication and cooling and heat dissipation capacity. Affects the service life of the oil.

The specific method of changing the oil is as follows: lift the vehicle with a jack, find the bolt of the oil-draining eggplant beam, and take out the oil. Unscrew the oil filter and place the container under the filter.

Fill up the new oil filter and add new oil. Different brands of oils can be mixed, and it is generally not recommended to use them in tight and rapid situations. Regardless of the mix of several oils, the labeling and grade of the oil need to be consistent.

Different brands of oils can be mixed, but mixing is not recommended. Here's what you need to know about oil blending. No matter how many kinds of oil are mixed, the grade and grade of the oil should be the same, such as fully synthetic 5w30 or fully synthetic At present, most of the dispersed oil detergents are sulfonates, and some dispersed oil detergents are salicylates, which are incompatible.

When mixed together, it will cause delamination, cloudiness, and poor cleaning ability. Abnormal exhaust gas: Mixing different brands of motor oil may cause abnormal exhaust such as black or blue smoke.

The mixed oil may be diluted and the oil can easily enter the cylinder for combustion, creating blue smoke in the exhaust pipe. The oil mixture can also loosen the cylinder seals and produce black smoke.

It is not allowed to mix different brands of engine oil, as different brands of engine oil have different chemical additives. When mixed, these chemical additives may react and reduce the lubrication of the oil. After mixing, the performance of the engine oil will be reduced.

Of course, different brands of engine oil can be mixed, and his models are all of this model, but the brands are different, and there is no harm to the car.

It's better not to mix it up, because it's not good for the engine of the car, especially the big brand car.

Different types of oil contain different chemicals, mixing may lead to accidents, there are huge safety hazards, and mixing should be avoided as much as possible.

Precautions for changing engine oil:

1. Pay attention to the time of changing the oil, the time of changing the oil is generally based on the number of kilometers and time, whether you listen to the old driver or read the instructions, you will give a suggested value, for example, ordinary mineral oil in 5000 kilometers or half a year, semi-synthetic oil 7500 kilometers a change, fully synthetic oil 10000 kilometers a change.

2. Pay attention to the amount of oil added, the amount of oil should be slightly lower than the scale on the oil dipstick, and do not add too full. Engine oil is extremely important for the movement of the engine, as it is responsible for lubrication and heat dissipation. Therefore, at any time, oil must not be lacking for the engine, but excessive addition (exceeding the upper limit of the scale) has bad consequences.

Too much oil will increase the rotational resistance of the crankshaft, reduce the output power of the engine, and the excess oil will enter the combustion chamber to participate in combustion, causing the vehicle to burn oil, emit blue smoke, and increase fuel consumption.

3. Choose a good engine oil, from the perspective of the type of engine oil, the most common on the market is semi-synthetic engine oil and Quanxiao Rankai synthetic engine oil, this is because the technology of automobile engines is becoming more and more advanced, and the requirements for engine oil are getting higher and higher. (Photo by Chen Jie2) @2019

Generally speaking, different varieties of oil with different compounds, mixed application will lead to safety accidents, there is a great safety risk. Mixing should be minimized, otherwise it will not be possible to conduct a definitive examination of the quality of the oil. If mixing is necessary in special circumstances, some mixing criteria may be relied upon.

Does oil mixing have an effect on the car?

If the oil is mixed strictly in accordance with the mixing standard, it is not easy to have much harm to the car, but it may cause turbidity after mixing different models and specifications of engine oil, because the organic chemical additives of different well-known brands and different models of engine oil are different, and this chemical product has the opportunity to produce chemical changes after mixing, reducing the actual effect of moisturizing, and the town will cause strong acid and alkali chemicals, which will aggravate the erosion of automobile engine parts.

The vast majority of oil dispersion detergents use sulfonates, while some oil thickeners are sodium salicylates. The two are incompatible. If the two lubricants are mixed together, it will cause layering, turbidity, and reduced cleaning ability.

Mixing standards: 1. Under normal conditions, mixing should be minimized, otherwise it is difficult to carry out accurate detection of oil products.

2. The oil can be mixed under the following circumstances:

1) The quality of similar equipment is basically similar, or the high-quality oil mixed with the low-quality oil is still treated as the low-quality oil;

2) Adjust the chemical and physical properties of the oil, such as viscosity, so that different grades of the same oil can be mixed.

3) Different varieties of oil, if you know that there are no additives in the two mixed oils, or there are additives in one of them, or the two oils have additives, but it is not easy to reflect each other, they can generally be mixed, but after mixing, the quality of high-quality oil products will be reduced roughly.

4) General mineral engine oil can be mixed, and a large amount can be mixed between mineral engine oil and semi-synthetic engine oil. Mix fully synthetic and mineral oils with caution.

3. For the oil with unclear characteristics and additives, if it is indeed necessary to mix, it is necessary to carry out a mixing experiment before mixing (for example, mixing two kinds of oil with a volume ratio of 1:1) to observe whether there is abnormal conditions such as heavy odor and deposition in the mixed oil. If there is a strong odor or deposition, it should not be mixed.

The key physical and chemical properties of the grease are good for measuring left and right before and after mixing.

4. Attention should be paid to the application of mixed oil, if you do not have a good grasp of the oil to be mixed, the very simple way is to mix the same brand of oil with the same coding sequence.

Therefore, for the question of whether the engine oil can be mixed, it can be judged whether it meets the mixing standard, and if it does not meet the mixing standard, it can be distinguished according to the third point whether the characteristics of the mixed engine oil have changed.

Millions of car purchase subsidies.