Why is the hair dryer suddenly unusable, it s good to leave it for a while

Updated on number 2024-03-16
23 answers
  1. Anonymous users2024-02-06

    This condition of the hair dryer is caused by overheating and causing a short power outage, and it can be used safely and normally after it has cooled for a while.

    A hair dryer is a combination of a set of heating wires and a small fan with high speed.

    When the electricity is turned on, the heating wire will generate heat, and the air blown by the fan will pass through the heating wire and become hot air. If only the small fan is rotating, and the heating wire is not hot, then only the wind is blowing out but not hot.

    The air blown out of the hair dryer is a dry wind, if it is used for too long, it is easy to cause water loss, causing heat damage, the secret to minimize the damage is: use a towel to pat the moisture on the hair first, gently comb the hair with your hands, and then use the hair dryer.

    Hair dryers are mainly used for hair drying and plastic surgery, but they can also be used for local drying, heating and physiotherapy in laboratories, physiotherapy rooms, industrial production, art and other aspects.

    According to the type of motor it uses, it can be divided into AC series excitation, AC shaded pole type and DC permanent magnet type. The advantages of the series blow dryer are that the starting torque is large and the speed is high, which is suitable for manufacturing high-power hair dryers; The disadvantage is that the noise is high, and the commutator has certain interference to the telecommunication equipment.

    The advantage of shaded pole hair dryer is that it has low noise and will not cause interference to telecommunication equipment; The disadvantages are low speed, poor starting performance, and large weight.

    The advantages of permanent magnet hair dryer are light weight, high speed, simple manufacturing process, low cost, and low price.

    The selection switch on the handle of the hair dryer is generally divided into three gears, namely the off gear, the cold air gear, and the hot air gear, and is accompanied by white, blue, and red signs.

    Some hair dryers are also equipped with motor speed switches on the handle, which can be used to select the size of the air volume and the temperature of the hot air.

    Behind or on the side of the shell of all kinds of hair dryers, there is a rotatable circular air control hood, which can be rotated to adjust the cross-sectional size of the air inlet, and the wind speed and temperature of the hot air can be adjusted.

  2. Anonymous users2024-02-05

    This is caused by the hair dryer's overheating protection function turned on.

    If the hair dryer is used for too long, it may cause the internal heat of the machine to be too high, which will lead to the burning of components or hair loss, so when the temperature is reached, the overheat protection function is turned on, and the machine will automatically stop running, and it can return to normal when it cools down.

    Generally, the hair dryer has an overheating protection device, and the temperature is too hot to automatically cut off, and it can be used normally after a little cooling.

    Now many hair dryers have an automatic power-off protection function, when the heat is too high for a long time, it will automatically power off and wait for cooling, Kangfu brand hair dryers are ranked among the top 3 in the country, and I am a hairdresser who uses more Kangfu's hair dryers. In fact, I have used many Yasuo models. Personally, I recommend you to use the Kangfu KF-2501, which is 1800W, with hot air, cold air, strong wind, small wind, constant temperature and not so much hair hurt, and it is ultra-quiet design (I mean pure sound, no noise, not small sound or no sound), unlike other hair dryers, when turned on, although the wattage is very large, but there is a lot of noise, and the sound is very noisy.

    Kangfu brand hair dryer***, I have used many hair dryers with 2300w and 2400w, and I think they are not as easy to use as Kangfu 1800w. Because the hot air of this model is hotter, it has a better ability to style hair, and it is more suitable for people who want to achieve the effect of a hair salon at home. It is not recommended to buy a relatively large wattage, such as 2000w or more, because if you are not a professional, it will be easier to blow your hair out and not achieve the desired styling effect.

  3. Anonymous users2024-02-04

    Why is the hair dryer suddenly unusable, it's good to leave it for a whileDepending on whether your electric fan is 380V or 220V, there are only four common situations when an electric fan is generally broken.

    1. Natural jitter leads to false welding of the line inside.

    Second, the starting capacitor inside is broken (generally manifested as insufficient capacity), at this time, use the tool to check whether the capacitor is broken.

    Third, the motor burned. Generally, if it is burned, it can only sell scrap iron.

    Fourth, when the hair dryer is used for too long, the internal heat of the machine is too high, which will cause the components to burn out or the hair loss, so when the temperature is reached, the overheat protection function is turned on, and the machine will automatically stop operating, and it can return to normal when it cools down.

  4. Anonymous users2024-02-03

    Your hair dryer should have a thermostatic effect, it will stop when the temperature of the hair dryer is too high, and it can be used again when the temperature is lowered.

  5. Anonymous users2024-02-02

    No.

    Circuit failure: Circuit failure is a major problem that affects the smooth operation of electrical appliances, and it is also a common situation. One of the reasons why the hair dryer suddenly stops may be a circuit problem, such as an unstable voltage or a short circuit in the circuit, which causes the hair dryer to fail to operate normally, which may seriously damage the hair dryer.

    Therefore, if the hair dryer stops suddenly, you can first consider whether the circuit is faulty.

    The working principle of the hair dryer is that the motor drives the fan blades to rotate and produce air, so the motor is an important power to ensure the operation of the hair dryer. If the motor fails, the blades cannot rotate, and the wind cannot be formed, and the hair dryer will not be able to fulfill its drying function. Therefore, the failure of the motor is also a reason for the sudden stop of the hair dryer.

    Precautions for the use of hair dryers.

    When using a hair dryer, the correct thing to do is to turn it on first and then turn on the switch. This has the advantage of prolonging the service life of the motor and avoiding damage to the motor due to sudden high temperatures. If you don't use it for a while, you should turn off the switch temporarily.

    When using the hair dryer, you must gently hold and put it gently, do not keep shaking at will, and do not change gears frequently, the hair dryer should not be too close to the hair, not blowing straight in one place, and not blowing against the hair and scalp to avoid unnecessary dangers. There is also a voltage that should be kept in a steady state.

  6. Anonymous users2024-02-01

    When this happens, the overheating protection of the hair dryer is at work.

    When the temperature of the hair dryer reaches a certain value, the hair dryer with safety standard settings will start this protective measure, so that the internal temperature of the hair dryer can be started again when it is reduced to a safe value, so as not to cause safety accidents. This is a normal situation, not a broken or faulty hair dryer.

    Heaters and electric heaters in household appliances also have the same settings for the same reason, all for safety.

    Precautions: 1. When using the hair dryer, do not let the machine get too close to the hair, which not only damages the hair, but also causes too much radiation, and long-term blowing can cause headaches and other symptoms, it is recommended to keep a certain distance.

    2. There is often dust accumulation at the air inlet and outlet of the hair dryer, which should be cleaned frequently, but it should be noted that the hair dryer must be powered off when cleaning, so as not to cause harm to the body, and clean the bacteria and dust, and ensure the health of the hair dryer.

  7. Anonymous users2024-01-31

    I've also experienced something like this, the hair dryer blows and stops, and then after a while it gets better again, because:

    There is a temperature control setting inside the hair dryer that automatically disconnects if the temperature of the hair dryer is too high, which is a safe setting.

    An electric hair dryer is about 1000 watts, and if it is used continuously for a long time, the temperature will gradually increase, and to a certain extent, it may cause ** or scalds, which will hurt the user.

    Therefore, when you use a hair dryer, remember not to use it for a long time.

    The best way is to turn it off for a while, and then use it every two or three seconds, and if the hair dryer is used to blow clothes, it should be used intermittently, and the suction outlet of the hair dryer must not be blocked, which will be very dangerous!

  8. Anonymous users2024-01-30

    It's just that the temperature is too high, and now the hair dryer has such a device, and it will be disconnected when it reaches a certain temperature, don't worry, it's okay. At the time, I thought the hair dryer was broken!

  9. Anonymous users2024-01-29

    There are two reasons for this.

    The first reason is that the plug or the internal wiring of the hair dryer is not in good contact at that time.

    The second reason is that there is a problem with the electrical circuit at home.

    It is recommended that before buying a hair dryer, consider the voltage of the place where you use, some students buy a hair dryer with more power, but they can't bring it to the dormitory. There is also the choice of hair dryer as much as possible to choose a higher one, so it is more assured to use.

  10. Anonymous users2024-01-28

    Yes Mine is the same way, it's so annoying.

  11. Anonymous users2024-01-27

    There is a virtual connection in the middle of the power cord of the hair dryer, that is, a wire is broken, but it can still be touched a little, and the easiest way is to change the power cord after opening the shell. Hope it helps! Please adopt it.

  12. Anonymous users2024-01-26

    No, maybe you're too beautiful, so it's dumbfounded, right?

  13. Anonymous users2024-01-25

    Yes, that's overheating self-protection, it's not broken, household ones have this function.

  14. Anonymous users2024-01-24

    It may be that the thread contact is poor, so fix it!

  15. Anonymous users2024-01-23

    The switch contact is not good, take it apart and take a look, there must be a loose wire.

  16. Anonymous users2024-01-22

    The automatic adjustment function means that when the temperature is too high when you blow your hair, the hair dryer adjusts the temperature, otherwise the temperature of the hair dryer is too high and it will break, so you can use it after adjustment.

  17. Anonymous users2024-01-21

    It may be that the heat dissipation is not good. After a while, when the temperature went down, it naturally opened on its own.

  18. Anonymous users2024-01-20

    Yes, the threads inside are not in good contact.

  19. Anonymous users2024-01-19

    Yes, for some reason, I simply bought a new one later.

  20. Anonymous users2024-01-18

    Hello dear <>

    The hair dryer suddenly stopped blowing and it was broken. If you don't blow it, the solder joints inside will fall off, resulting in no power. If the temperature is too high, the temperature control automatically cuts off the power and cools down for a few minutes before it can be used again.

    It may also be caused by the use of the hair dryer for too long, if the hair dryer is used for a long time, the temperature of the fuselage will become very high, when the temperature exceeds the set temperature to the tung pin, the electric heating element inside the hair dryer will burn out, and it will automatically turn off the local tour, no longer continue to blow, then the hair dryer can only be replaced with a new one. It may also be because the hair dryer has been used for too long, and the temperature of the fuselage has become very high, and the temperature control device of the hair dryer will automatically cut off the power supply in order to prevent the hair dryer from being burned out, so that the hair dryer can not continue to blow, and then you can only continue to use it after the hair dryer has cooled down. I wish you a happy life!

    Hope mine is helpful to you.

  21. Anonymous users2024-01-17

    <>1. Solder joints fall off: no electricity, do it yourself with the ability to disassemble and connect it, the general hair dryer is not energized may be because the solder joints fall off, or the internal circuit is loose, or short circuit, check the version first, if it really doesn't work, take it to the repair shop for maintenance; 2. Due to the high temperature, the hair dryer turns on the temperature control protection function: if the hair dryer suddenly does not work during use, it may be because the temperature is too high, the temperature control device automatically cuts off the power supply, and the temperature drops down to use.

    1. The solder joint falls off.

    If the hair dryer suddenly does not work, it may also be that the solder joints inside fall off, and the stupid electricity is not passed, and the ability to do it yourself is strong to disassemble and connect it, and the general hair dryer is not energized may be because the solder joints fall off, or the internal wiring is loose, or the short circuit, check the version first, if it really doesn't work, take it to the repair shop for maintenance.

    2. Due to the high temperature, the hair dryer has turned on the temperature control protection function.

    If the hair dryer suddenly doesn't work during use, it may be because the temperature is too high, and the temperature control device automatically cuts off the power supply, and it can be used when the temperature drops.

  22. Anonymous users2024-01-16

    Blowing airplanes is one of the commonly used electrical appliances that can be used to blow hair or wet clothes. Is it broken that the hair dryer suddenly stopped blowing? PChouse will take you to find out.

    1. Solder joints fall off: no power, do it yourself with the ability to disassemble and connect it, the general hair dryer is not energized may be because the solder joints fall off, or the internal circuit is loose, or the short circuit, first check the version, such as the high slow fruit in the can't take it to the repair shop for maintenance.

    2. Due to the high temperature, the hair dryer turns on the temperature control protection function: if the hair dryer suddenly does not work during use, the temperature control device automatically cuts off the power supply because the temperature is too high, and the temperature drops down.

    3. It may also be because the life of the hair dryer is too long, resulting in problems with the parts. When the hair dryer is running for a long time, the temperature of the body will rise, and if it exceeds a certain value for marketing, it will cause the electronic components inside the hair dryer to burn out, and it will not work and need to be reinstalled.

  23. Anonymous users2024-01-15

    The hair dryer suddenly stopped blowing and it was broken.

    1. Under normal circumstances, the hair dryer cannot work, it may be that the solder joints have fallen off, the internal circuit may be loose, or it may be a short circuit, which needs to be checked, and it is really not possible to send it to the repair shop for repair.

    2. Because the temperature is too high, the hair dryer will automatically start the temperature control. If the hair dryer suddenly stops when in use, it is likely that the temperature is too high, so the thermostat will automatically turn off the power and wait for its temperature to drop, and it can work normally.

    3. There is a problem with the internal fan motor, which may be due to overheating and the motherboard is burned out. A hair dryer depends on maintenance, if it is too expensive, replace it.

    4. Check whether the plug contact is poor, or the plug is broken, try to change a socket, if the hair dryer will work for a while and will not work for a while, it is a poor plug contact.

    Notes:

    Hair dryers should not be used for a long time, because the radiation of hair dryers will cause certain harm to the body, and long-term use will also cause damage to the hair. Before using a hair dryer, it is necessary to determine whether the power supply voltage meets the requirements, the voltage of each hair dryer is different, and it depends on its power.

    The air vent of the hair dryer must be kept at a certain distance from the hair, otherwise it is easy to roll up the hair and block the air outlet, and if it is too close, the moisture in the hair will evaporate unconsciously. Put it in a ventilated and dry place, don't litter, and don't remove the hair dryer.

Related questions
7 answers2024-03-16

Touchpad hardware problems: At this time, it is best to contact after-sales service to solve the problem, the general notebook touchpad does not respond, and most of them appear in laptops that have been used for a long time. >>>More

6 answers2024-03-16

It may be due to a mistake that the shared printer in the computer has been turned off

10 answers2024-03-16

This is the background evaluation that can be used if the conditions are met1You just do your best, and you will open it if you meet the conditions, add more Alipay friends with high credit, submit more complete information, and it is best to submit a credit card. 2. >>>More

14 answers2024-03-16

After a long time, the computer will have different degrees of minor problems, and the computer should be checked and maintained frequently! >>>More

7 answers2024-03-16

Reason: For non-ferromagnetic metals, such as aluminum, copper, etc., although they can produce eddy currents when placed in the electromagnetic field, the magnetic permeability is weak, and the magnetic field through them is only a small part, and most of the electromagnetic field still spreads to the surrounding area and has adverse effects on the human body. >>>More