The correct way to adjust the driver s seat, how to adjust the driver s seat of a car

In daily life, it is found that many car owners do not adjust the seats when they get into the car, or the seats and sitting postures are wrong. In this case, it is easy to cause injury to the owner in the event of an accident. To that end, today I would like to introduce to you how to adjust the car seat correctly.

Driving can be said to be a very hard thing, and the driver must be highly concentrated in that seat throughout the whole process. Therefore, the seat should be adjusted to take into account both the comfort of the driver and the convenience of driving the car. 1.

Adjust the distance between the seat and the pedal Since everyone's height is different, the driver should first adjust the distance between the seat and the pedal after getting into the car to ensure that the driver's leg is still a little bent after fully pressing the pedal. If the distance between the seat and the pedal is large, the driver will be more comfortable with the legs, but the accuracy and force of the pedal will be less effective when using the foot. On the other hand, if the distance between the seat and the pedal is small, the legs and feet will be easily fatigued.

2.Adjusting the distance between the steering wheel and the driver is then adjusting the distance between the steering wheel and the driver. The rule of thumb is to place your arms straight at the top of the steering wheel with your wrists just below the edge of the steering wheel, indicating that the steering wheel has been adjusted to the correct position.

3.Adjust the Steering Wheel GestureThe correct steering wheel gesture is to hold the steering wheel with your left hand at 9 o'clock and your right hand at 3 o'clock. When holding the steering wheel, the thumbs of both hands should be on the outer edge of the steering wheel, "Do not clasp the steering wheel inward."

Because, on the one hand, it will affect the flexibility of the direction, and on the other hand, it will hurt the fingers when the direction is rushed in an emergency. 4.Adjusting the headrest is followed by adjusting the driver's headrest.

Many drivers and passengers are not very good at adjusting the headrest, thinking that the headrest is only for the driver to rest, and has no other purpose. In fact, this is very wrong, when the vehicle is impacted, the head will instantly reverse the impact of the headrest due to inertia, and the unreasonable headrest position will cause different degrees of damage to the head and neck. The most appropriate position for the headrest should be the center of the back of the head facing the center of the headrest, and the driver's head should be two fingers away from the headrest.

5.When adjusting the backrest to sit, the waist is the most laborious, because all the strength of the upper body is on the waist, so it is very important for those who drive a lot to learn to adjust the seat to the best comfort. The principle of backrest adjustment is that the seat and backrest of the car are tilted about 100 degrees, and the lumbar support in the middle of the backrest is adjusted as high as possible.

This can not only protect the waist well, but also relieve the driver's driving fatigue. 6.Wearing a seatbeltFinally, it's all about wearing your seatbelt properly, and don't think that you don't have an airbag to go without it.

Seat belts play a vital role in the event of a car accident.

The adjustment of the seat in the cab of the car affects the driving safety, and the adjustment method is as follows:

Backrest angle. Once you're in the car and sit down, bring your hips back together and adjust the angle of the backrest first in a more standard sitting position. The angle of the backrest determines the comfort level of long-distance driving, and it is also very particular.

The angle of the backrest must not be adjusted to the degree of reclining, although this is very comfortable, but it will increase the hidden danger of driving, and it is too late to react to accidents.

The correct angle should be to lean back and seat cushion at a slightly greater than 90-degree right angle, with the body leaning back slightly to help relax. If you are driving long distances, it is best to place a cushion to fill the gap between the waist and backrest, relieve back pain, and drive more comfortably.

Seat height. The height of the seat should ensure that our vision will not be blocked by the steering wheel, so adjust the seat as high as possible to have a wide field of vision, and we can see more things, which increases driving safety. But make sure you keep your head and the roof at a fist and a half (at least one punch) away so you don't hit your head even if the road is bumpy.

Seat front and back. I believe that many people have found that car owners with more driving experience have the habit of adjusting the seat backwards. But the front and back of the seat depends on whether we can easily press the pedal to the end.

It is not difficult to drive at this distance, and the airbag can be effectively deployed in the event of an accident.

Headrest. The headrest is a place that many car owners tend to ignore, and most car owners feel that the headrest has no practical effect, or put the headrest in the position of the neck, and the neck will be more comfortable when leaning back. However, this position is wrong, and it is easy to sprain your neck when something happens.

The correct position of the headrest is at the back of the head, which is the safest position. Driving doesn't make your neck feel sore, and it also avoids the most fragile neck from being hurt. It will not affect the field of vision of driving, and the sense of comfort is relatively strong. Is your seat adjusted correctly?

After you get into the cab. You need to adjust the distance between your legs, i.e. the driver's seat, and the brakes, then adjust the position of the seat, and finally adjust the angle of the seat back. You'll be able to adjust the seat to the optimal position.

The correct way to drive, can't remember to collect it! Fumei's car sister and stupid black fat brother use car story!

Car seats are divided into electric and manual, electric has buttons to adjust, manual general models before and after the adjustment under the seat, backrest adjustment on the side of the door, some cars also have seat height adjustment on the side of the door.

There is an adjustable one under the seat, or next to it.

It is generally on the left and right sides under the seat. Look.

1. Take the Honda Fit as an example, first open the door on this side of the cab, as shown in the figure below

Second, then press the brake pedal, as shown in the figure below

<>4. Press the electronic switch next to the seat to adjust, as shown in the figure below

5. At this time, the seat will automatically move, as shown in the figure below

The correct driving posture is mainly the adjustment of the seat, which is divided into three points: the distance between the front and rear of the seat, the height of the seat and the angle of the steering wheel. And after adjusting the seat and steering wheel, be sure to fasten your seat belt.

The first step is to adjust the height of the seat (depending on the car, this example car has a seat height adjustment, but some models do not). When adjusting the seat up and down, make sure that your head is at least a fist away from the roof. If the seat is adjusted too high, the head is likely to touch the roof when the vehicle is bumping; If you adjust it too short, it will block your view and affect normal driving.

Then you need to adjust the distance between the front and back of the seat. When the foot is pressed on the brake pedal to the very bottom, the leg should still have a certain amount of flex. The backrest adjustment varies from person to person, and it is best to sit upright to clearly see the front cover, and the angle should not be too large or too small.

Finally, there is the adjustment of the steering wheel. When adjusting the steering wheel, the shoulders should naturally lean back, and the wrists should be just right on the steering wheel with the arms straightened, so that the steering wheel can be turned effectively. When driving, you should hold the steering wheel with both hands, and place it at "3 o'clock" and "9 o'clock", with your thumb naturally resting on the steering wheel and your arms naturally bent, so that you can control the steering wheel to a greater extent.

The correct way to drive, can't remember to collect it! Fumei's car sister and stupid black fat brother use car story!

Driver's Seat Adjustment Steps:

1. Adjust the front and rear positions of the seats. Hold the steering wheel with your right hand and control the seat adjustment handle with your left hand, sliding back and forth to adjust the position where you can easily press the clutch pedal and brake pedal to the end.

2. Adjust the seat back: hold the steering wheel with one hand, raise the adjustment handle with the other hand, and use the back to adjust, so that both hands can hold the top of the steering wheel as the most suitable type of branch.

3. After adjusting the seat, put down the adjustment handle, move the seat chair back and forth, and lock the locking mechanism.

The most reasonable sitting position is also the safest way to drive. The driving position can be achieved by adjusting the height of the seat, the front and rear positions, and the reclination of the backrest, as shown in Figure 2-4. The first thing the driver does when they get into the car is to adjust the seat to achieve the most comfortable sitting position.

The specific steps are as follows:

Method of adjusting the driver's seat (1) Backrest adjustment:

The backrest of the driver's seat should be tilted back slightly, so that it will be more comfortable to sit on. But too much tilt will affect the operation. Generally, adjusting to 100 120 is a more suitable tilt angle (which can be adjusted according to the individual's body type).

Method of adjusting the driver's seat (2) Adjust up and down:

Elevate the seat as high as possible so that the view is better. But it can't be too high. Leave a space of no less than 60mm on the top of the head to prevent bumping.

Method of adjusting the driver's seat (3) Front and rear adjustment:

Start the engine first, let the vacuum booster pump work, and then press the brake pedal firmly with your right foot. At this time, your legs must be bent to a certain extent. In this way, you can use your feet to exert force during emergency braking.

Generally, the angle between the legs should not be greater than 130; After pressing the left clutch pedal all the way down, the knee should be able to maintain a certain degree of bending, otherwise, move the seat back and forth to adjust to the optimal position, as shown in Figure 2-5.

How to adjust the driver's seat (4) Lumbar adjustment:

Once you're in your seat, don't let your back hang in the air. If the backrest does not have the function of lumbar support adjustment, you can buy a small lumbar cushion and put it under the lower back, which can not only protect the lumbar but also relieve fatigue.

How to adjust the driver's seat (5) Headrest adjustment:

The main function of the headrest is to protect the neck. When you are tired, you can rest your head. The height of the headrest should be at the same level as the eyes, and there should be a gap of 20mm between the head and the back of the head. When the body leans back, the headrest should naturally support the back of the head, because the headrest is in the correct position when the car is rear-ended.

Today, Bian Xiao is here to introduce the adjustment of the driver's seat of the car. Do you have a clear understanding of adjusting the driver's seat? I hope Bian Xiao's introduction can help everyone. If you like it, stay tuned to this**. Bian Xiao will be updated frequently.

The steps to adjust the seat while driving are as follows:1Adjust the seat height.

The height is based on the comfortable position where you can see the bonnet of the car, and for the rearview mirror, the position of the adjustment should also try to meet your own line of sight and make yourself feel safe. 2.Adjust the front and rear of the seat.

The front and rear adjustment of the seat is mainly based on the position of the vehicle pedals. First, press the brake with your right foot to the ground, place your left foot on the rest pedal of your left foot (automatic transmission) or fully press the clutch pedal (manual transmission). At this time, the distance between the front and rear of the seat is adjusted, and the driver's knees should be bent to a certain extent about 120 degrees under the condition that the pedal is fully pressed.

The engine should be started during the whole adjustment process, because when the vehicle is in a stalled state, the brake pedal cannot be pressed to the end, which affects the adjustment accuracy. 3.Adjustment is based on burying the back.

The adjustment of the seat back is mainly for comfort, the seat surface and the backrest of the car driver's seat are inclined about 100 degrees, and the lumbar support in the middle of the backrest is adjusted as high as possible.