Why can t I connect to my telecom broadband so often?

If your home broadband connection cannot be used properly, you can use the following methods to troubleshoot the problem:

1.Check the modem router at home to see if the line is connected normally and whether the indicator light is abnormal, and it is recommended to plug and unplug the line and restart the device.

2.Check whether the broadband account has expired and whether it is suspended due to arrears.

Hello, telecom broadband can not connect to the network, please check whether the broadband cat has a red light flashing, if there is a fault in the broadband, you can call the telecom customer service for feedback and fault processing, for more service discounts, please pay attention to "China Telecom Guizhou customer service"***. Customer service 16 will answer for you.

First, check whether there is any software such as a firewall or Internet assistant, and if so, it is recommended to log out. 1. Test after exiting the firewall and Internet assistant: if the fault is solved, it is your own computer software problem; 2. If the fault still exists, enter the next step to continue processing.

I asked the telecom staff when I got off the shelf.

Hello. You can try to restart the telecom broadband cat and other equipment, if it is still like this, you can call the number 10000 and ask the staff to help you check. For more service discounts, users can pay attention to "Anhui Telecom" WeChat***.

1. Check whether the network cable is loose.

For most broadband users, ADSL is the most common way to connect to the wireless router, and when the connection is dropped, the first thing we need to consider is the line problem.

Due to the fact that the first line is too long, there are too many connectors, or there are some interference sources, it is likely to cause the line to drop, and the network cable that is inferior and does not meet the standard often causes network instability, so when you find that the line is dropped, you must first check whether the network cable interface is loose.

If you find that the network cable interface is intact, you should check the problem with the power signal light.

Second, whether the power signal light is always on.

If the power signal light is not on, the first thing to check is the power supply. For example, whether the connection is disconnected due to the unstable power supply of the mains, whether there is a problem with the power supply of ADSLMODEM itself, etc.

Touching the ADSLMODEM shell with your hands, it feels very hot, at this time, you may wish to temporarily turn off the ADSLMODEM until it cools down before turning it on, or place it in a more ventilated position, which can also eliminate the disconnection fault.

3. Check whether the data signal is normal.

If the data signal light is not on, it is likely that the line is open, short circuit, etc., and then pass the ** test to see if the line is normal, if not, you can ask the technician of the ADSL service provider to solve this problem.

If the data signal light is flashing, it is likely to be caused by poor line contact, you must check whether the extension is used, whether the connector is firm, whether the ADSL connection line is too long, etc. If the data signal lamp still does not turn on after checking the above steps, the fault is not related to the line, and you can continue to look for other reasons.

It is recommended that you call the telecom 10000 customer service first, and let them check the line to find out whether it is a telecom problem or a computer problem.

If there is no network for telecom broadband, don't worry, 1. Check whether the network cable plugged into the computer is loose and slipped. 2. If not, check whether the power indicator of the telecom broadband router is lit, if it is on, it means that the power is normal. 3. Next, check whether the network cable plugged into the router is loose and slipped.

4. If not, you can unplug the power of the router, wait a while and plug it back in to start up, let the router return to its initial state, and then see if the network on the computer is normal. 5. If the network is still abnormal, then you need to call the telecom customer service** to apply for repair.

678 There are many possibilities Computer 1IP Setup Problem 2 Poisoning Dial Delete Re-establish a try.

Telecommunications, which is generally a telecommunications problem, can call 10,000 and ask them to come and see it, and this is a minor problem.

1. Line issues.

2 ADSL (cat's) problem.

3. Broadband location issues.

Hello First of all, you put the **line behind your cat** off, plug in**can pass, if it doesn't work, look at the line** can break something, if it is through, just look at the separator. Look at the separator, first of all, make sure that you have a few **, each ** needs a separator, the phone is**model is a cat, if you don't know how to connect the separator, just drop all the **, and then look at the cat's light, mainly to see the link or adsl This light If it is straight on, it means that the line has a signal, if it is not lit or flashing, it is not good, if it is not lit, there is no signal, if the **line pain separator after the cat is correct, it is basically a problem with the port of the computer room, if it flashes, Look at whether it is fast flashing or slow flashing, if it flashes quickly, it means that you have a wire that is not connected, check the line, if it flashes slowly, it is basically the same as not bright. As for what network card,You just look at the fourth light of the cat,E starts with the head,It's not bright,If it's on, it basically has nothing to do with your computer.。