What is the impact of the uplink and downlink of the fiber on the network speed

Updated on technology 2024-03-02
6 answers
  1. Anonymous users2024-02-06

    Optical fiber broadband converts the data to be transmitted from electrical signals to optical signals for communication. At both ends of the optical fiber, there are "optical modems" for signal conversion.

    Optical fiber is the most ideal one of a variety of transmission media in broadband network, which is characterized by large transmission capacity, transmission capacity, low loss, long relay distance, etc. Optical fiber transmission uses wavelength division multiplexing, that is, the data of multiple users in the cell is fused into high-speed signals using PON technology, and then modulated to different wavelengths of optical signals are transmitted in an optical fiber.

    The difference between optical fiber broadband and ADSL access mode is that ADSL is electrical signal propagation, and optical fiber broadband is optical signal propagation.

  2. Anonymous users2024-02-05

    Broadband is a newly installed telecom 8m optical fiber,The downlink can reach up to 1m s,The uplink can be up to 500k s,At the same time, it's a tragedy,I opened the browser to upload in Youku at full speed 500kb upload,Then open Thunder** software,**Speed runs to 1m,Upload plummets,Only 100k is less,Dozens of kb run。 Doesn't it mean that the optical fiber is uplink and downlink and does not affect each other, the optical modem is ZTE ZXHN F612, the router is Netgear 614 V7, and the tomato is brushed, and the computer is a PCI-E 300M wireless network card equipped with a desktop.

  3. Anonymous users2024-02-04

    1. The uplink speed is the speed at which you upload, such as when you send an email, upload, etc., and the downlink speed is mainly the speed of your upload, such as when you watch a movie, something, etc., usually we say a few m, all refer to the downlink speed. Generally, the uplink of ADSL is only 512K, regardless of whether the downlink is 2m or 4m.

    2. The downlink is determined according to the size of the bandwidth, and the uplink is generally about the same. What operators call a few meters of broadband and ** speed are two different concepts. For example, the speed of 1m is 1024k, and the unit here is bytes, that is to say, the speed of 1m is equal to the byte of 1024k.

    The operator's broadband of several mbits, the unit is bits, that is, 10m broadband actually refers to 10m bits, which are also 10*1024k bits. One byte is equal to eight bits. To change the operator's broadband to ** speed, you need to divide the broadband by 8.

    3. The bandwidth of broadband is not equal, and the speed of household optical fiber generally refers to the speed of the first class. To put it simply, uplink means that you upload data from your computer to the network, for example, if you send an email and have an attachment, the speed of that upload is uplink. The downlink is easy to understand, and if you open a web page from a network ** file or a web page, it is all downlink.

    It's all fiber optic now, and the adsl replied upstairs is the previous story, and it's not accurate.

    4. According to telecommunications, the downlink rate is one-eighth of the uplink. For example, the 100m household optical fiber of general telecommunications now, the uplink speed is, of course, this m number is not the actual speed, it can be simply divided by 10, which is the actual speed, that is to say, 100m optical fiber, theoretically your ** speed can reach 10m per second, and the upload is only.

  4. Anonymous users2024-02-03

    The broadband uplink speed is mainly the speed of uploading, that is, the speed of sending data from the computer to the Internet, such as sending emails, uploading**, etc.;

    Usually when we say a few meters, we all refer to the downward speed. Regardless of whether the downlink speed is 2m or 4m, the uplink speed of ADSL is only 512K;

    Normally, the downlink speed is large and the uplink speed is large.

  5. Anonymous users2024-02-02

    The money spent is different.,Now it's basically downlinked.,General company fixed IP.,Uplink and downlink are equal.,Conventional household,4M,Downlink 4M,Uplink Now 100M's broadband uplink can reach up to 20M,Normal is 4M.Or 10m

  6. Anonymous users2024-02-01

    Quite simply, the upside is gold and the downside is scrap metal.

Related questions
4 answers2024-03-02

Generally speaking, the ideal optical fiber is equal to the uplink and downlink, but in reality, it is generally asymmetrical uplink and downlink fiber, but it is higher than the ordinary ADSL broadband uplink and downlink (ordinary ADSL uplink can reach up to 890, but the service provider will generally not give you that high, 1m uplink is 352kb, 2m uplink is 352kb, 4m uplink is generally 512 or 600 kb,** The maximum bandwidth of the line can reach 12m, and the ideal maximum bandwidth is below 8m), the optical fiber is different, the downlink is the same as your ** maximum, but the uplink is generally more than 1m value, that is, your upload rate can reach up to about 1m. Although you can apply for the downlink, as long as you have money and the total bandwidth is enough, you can almost meet the needs of as much as you want.

9 answers2024-03-02

Twisted pair and signal transmission through differential current, but with the increase of data volume, if the rate exceeds 100Mbps, the attenuation of twisted pair will become larger and larger, in other words, if you want to carry out data transmission of more than 1km of 500Mbps, twisted pair is not competent, and you must use optical fiber for communication; >>>More

10 answers2024-03-02

Common devices are routers, switches, and firewalls. What are the common brands of optical fiber access equipment? >>>More

9 answers2024-03-02

1.The main ingredient of black coffee is caffeine, which can promote blood circulation, refresh the mind and fight fatigue. 2. >>>More

7 answers2024-03-02

To summarize the disadvantages of blood donation that are hotly discussed on the Internet, it mainly focuses on the worry of contracting infectious diseases when donating blood, in fact, this is a completely unnecessary worry, because the needles and blood bags used in blood collection and supply institutions across the country are disposable medical consumables that have been strictly tested and qualified by the state, and there are strict operating procedures and requirements for blood collection.