How to remove or install the battery, how to install the battery

What needs to be installed or removed from the battery?

Pay attention to the positive and negative poles of the battery when installing. First, the battery has a positive and negative pole, which is the key point of the correct installation of the battery. As shown in the figure below:

Second, there are also hints in the installed battery compartment. As shown in the figure below:

Three, such an installation is wrong. As shown in the figure below:

Fourth, the correct installation is as follows, and the installation should be done as far as possible from the negative pole. Mounting from the positive terminal may not be possible, and the battery compartment may be damaged. As shown in the figure below:

According to the existence form of the battery, it is generally divided into two types, namely the external battery model and the built-in battery model, and the external battery means that the battery can be quickly removed by the shortcut switch; Built-in battery means that the laptop battery is built under the computer case, which is not convenient for quick battery removal.

How to install and use the electric vehicle battery to ensure that it can be used for a long time? The master will teach you the correct way to use it.

The installation of the battery should identify the positive and negative poles, and the specific methods are as follows:

1. Tools Raw Materials:

Batteries, machines that use batteries.

Second, the specific steps:

1. Identify the electrode: the protruding end is the positive electrode, and the smooth end is the negative electrode.

2. Installation container: the one with the spring is the negative pole, and the one without the spring is the positive pole.

3. Pay attention to the positive and negative poles: the positive pole of the battery is installed at the positive pole of the remote control.

4. Start from the negative electrode: the negative electrode is the same, try to start with the negative electrode when installing (installation from the positive electrode may not be able to be installed, but may damage the battery compartment), install Zheng Fengdou shouted to cover the lid after grinding, and the base shelter can be used normally.

If you are using a vivo mobile phone, models with external batteries can remove the back cover and battery by themselves, but cannot remove other accessories; The all-in-one machine does not support self-disassembly. It is recommended not to forcibly disassemble the phone to avoid causing damage to the phone's hardware.

If the mobile phone needs to be processed, you can take it to the service center for testing and processing; Vivo customer service center address inquiry method: enter vivo official website vivo**app--my--outlet query or vivo official website envy web version--scroll bottom--service support--service network query--select the province and city to query the customer service center address; vivo official customer service center.

Tips: It is recommended to bring relevant purchase vouchers (such as: purchase invoices, warranty cards, ID cards) when you go, and consult the staff of the consultation center in advance to ensure that the staff go again during normal working hours, avoid empty running, and pay attention to safety on the way to and from the party.

What battery is not recommended personally, unless you feel that you have a strong hands-on ability, report the model to give you guidance.

How to disassemble and assemble the battery: Prepare an 8-gauge wrench. 1.

Turn on the battery first. 2.At this point we will see a fixed barbell buckled on the battery, turn it off with a number 8 wrench.

Wang Fu 3Take it off when you open it. Next, this is the most critical part of the security reprieve involved.

Therefore, remember to observe every step of the way, otherwise it is easy to generate sparks and burn out the battery.

4.Here, next to the bricks, we will see icons labeled + bar and - bar (+ bar in the upper right corner, while - bar in the top left corner). We have to dismantle the negative electrode first, because the most common thing that the negative electrode touches the metal with is ignition, so we remove the negative electrode first.

5.Next, repeat the previous step to remove the anode and try not to touch the metal during the removal process.

6.Next, install the new battery.

7.Just like when you remove the fixed barbell, snap it into the groove underneath and twist it.

8.Repeat the steps above and twist backwards.

9.Be careful when you put it back. At this time, you have to reverse the electrode and put the positive electrode on the negative electrode first, and then screw the positive electrode on. Here, even with our car battery installed, it can be ignited.

Millions of car purchase subsidies.

It is known that the disassembly and installation of the suspected battery is a big loss: 1. Pull up the parking brake, put the transmission in the neutral position, put the ignition switch in the disconnected position, and turn off the lights and air conditioners, so that the electrical equipment of the whole vehicle is disconnected from the power supply; 2. Open the engine hood and disassemble the battery cable in the order of negative first and then positive, that is, first remove the tie wire on the negative pole, then remove the starter wire on the positive pole, remove the fixing bolt and take out the battery; 3. When installing the battery, place the battery smoothly, fix the bolts first, and then install the battery cable; 4. The cable installation sequence is positive first and then negative, that is, the positive wire of the starter is connected first, and then the negative wire is connected to prevent the wrench from falling and the iron from causing the battery to be short-circuited and discharged; 5. Before installing the battery, it should also be noted that the surface of the battery end post is clean, the terminal is firm and reliable, and it is strictly forbidden to knock on the end post, and keep your hands open to prevent the battery from bleeding due to loose end post.

Battery installation method: Before installing the battery, you need to confirm whether the specifications and model of the battery meet the requirements of the equipment to avoid mismatch.

Clean the battery tray and make sure there is no dust and debris to avoid affecting the battery contact. The positive and negative poles of the battery need to be properly inserted into the battery slot, otherwise the device will not work properly or damage the device.

Insert the battery into the battery slot according to the correct polarity, confirming that the battery is securely inserted into the slot. After installing the battery, close the battery cover, secure the battery and prevent the battery from falling off accidentally.

Before installing the battery, choose the battery that is suitable for the device, and do not replace the battery at will to avoid mismatch. When installing the battery, be sure to ensure that the positive and negative poles of the battery are correct, and do not let the two poles touch, so as to avoid short circuit of the battery, damage to the equipment or cause disasters. In the process of using the battery, it is necessary to avoid long-term quiet use in the hall or in a high-temperature environment, so as to avoid damage to the equipment caused by overheating of the battery.

How to choose a battery

1. Purchase battery products with the "national inspection-free" and "China famous brand" logos and local brand-name battery products, and the quality of these products is guaranteed.

2. According to the requirements of electrical appliances, select the applicable battery type and specification size, and purchase batteries suitable for electrical appliances according to the size and characteristics of electrical power consumption.

3. Pay attention to check the production date and shelf life of the battery, and buy the battery (new battery), the new battery has good performance.

4. Pay attention to the appearance of the battery, and choose a battery with exquisite packaging, neat and clean appearance, and no signs of leakage.

5. Pay attention to the logo of the battery, and the battery trademark should indicate the name of the manufacturer, the polarity of the battery, the battery model, the nominal voltage, the trademark, etc.; On the sales packaging (such as 2 heat shrinks or 4 heat shrinks, or hang tag hanging cards) there should be a Chinese factory address, production date and shelf life or the deadline of the shelf life indicated, and the number of the implementation standard (generally the national standard GB T

6. Because the mercury in the battery is harmful to the environment, in order to protect the environment, the battery marked with the words "no mercury", "0% mercury" and "no mercury" should be used on the trademark when purchasing.

Kiss <>

The way the battery is installed varies depending on the battery type, device model, and manufacturer, but the general electronic device will detail how to install the battery in the manual. Generally speaking, the installation steps of the battery are as follows:1

Open the lid of the battery compartment or battery compartment; 2.Put the battery in the corresponding position according to the instructions on the manual<>

3.Confirm that the battery has been installed correctly, then close the lid of the battery compartment or battery compartment. It is worth noting that before installing the battery, Chongmu not only needs to confirm whether the model and specifications of the battery match the equipment, but also needs to carefully check the polarity of the battery to avoid reversing the positive and negative electrodes.

If the battery is not used properly, it may lead to the occurrence of dangerous situations such as equipment damage and battery short circuit<>

Due to the imitation of the lease, the judgment must be in accordance with the provisions of the manual to install the battery <>< correctly