How are downlights installed? How to install downlights

First, use the appropriate tools to make holes in the ceiling according to the corresponding lamp size. Second, correctly connect the wires and the terminal of the lamp in accordance with the instruction manual, it is best to install and operate by a professional electrician, please follow the safety rules of wiring. Third, use your hands to insert the snap buckles at both ends of the slim LED downlight vertically into the ceiling cutouts that match their size.

Fourth, after confirming that the openings and the LED downlights are bonded and wired correctly, put down the spring buckles on both sides of the LED downlights to turn on the power supply.

If you have purchased a downlight at home, you need to understand the installation steps next. How do you install that downlight? PChouse will take you to find out.

1. Before installation, read the instructions in detail to determine the size of the downlight and the size of the opening on the ceiling;

2. After the size of the opening is determined, you can determine the opening position on the ceiling and make a mark, opening tool, it is recommended to use a small hand saw. If you are not sure clearly, you should ask a professional master to come so as not to damage the ceiling;

3. In the ceiling, the originally reserved power cord and downlight are connected according to the instructions, and the wire head must be insulated;

4. After the line is connected, adjust the position of the downlight to ensure that the height of the spring blade is consistent with the thickness of the ceiling, and then buckle the downlight spring into the plate hole;

5. After the lamp holder is fixed, you can press the bulb and the downlight installation is completed.

Different types of lamps and lanterns have different installation methods. What are the installation methods of that downlight? PChouse will take you to find out.

1. Preparation: Before installation, open the outer packaging of the downlight for inspection, confirm that all lamps and parts are intact, and if the lamps are found to have quality problems, they need to be replaced in time. In addition, determine the installation position in advance on the ceiling where the downlights will be installed, and ensure that the downlights are kept at an equal distance from each other.

2. Opening: Because the downlight is generally embedded in the installation method, it must be opened in the ceiling before installation, and the size of the hole must be determined according to the size of the downlight.

3. Wiring: Before embedding the downlight into the hole in the ceiling, you need to connect the wires in the downlight first. Under normal circumstances, there are two wires inside the downlight, the neutral wire and the live wire, remember not to connect the wrong wire.

The live wire reserved in the hole is connected with the live wire that comes with the downlight, and the neutral wire is connected with the neutral wire, and it is also necessary to pay attention to the fact that the power supply must be turned off when wiring, otherwise there will be a risk of electric shock.

4. Adjustment: There will be springs for fixing at both ends of the downlight, and the height of the downlight can be determined and fixed by constantly adjusting the spring. Before fixing, the height of the downlight and the size of the insert need to be adjusted, and the height of the spring blade must be consistent with the thickness of the ceiling, otherwise it is difficult to fix.

5. Install the bulb: After debugging the height, you can install the bulb, there will be a special position to install the bulb inside the downlight, after the bulb is fixed, and then the light card is broken, and the downlight can be embedded in the hole.

The installation method of downlight pat is as follows:

1.Prepare the tools: First, you need to prepare the tools you need for the installation, including electric squires and drills, wrenches and screws, etc.

2.Determine the installation location: Select the installation location according to the area that needs to be illuminated and punch holes in that location, the location should be determined according to the planned position of the luminaire.

3.Mounting Bracket: Use screws or metal clamps to mount the bracket to the hole.

4.Connect the power cable: Pass the power cord of the downlight through the conductive hole in the bracket, remembering to make sure the cord is not twisted or stretched.

5.Fix the lamp body: Insert the lamp body into the bracket, adjust the angle as needed, and fix the lamp body on the bracket after adjusting to satisfaction.

6.Complete the installation: check the fixation degree of the lamp, re-tighten the corresponding screws and ensure their firmness, and finally turn on the power supply for test lights to check whether all downlights are working properly.

It should be noted that when installing downlights, you must carefully read the product manual and installation guide to ensure the correctness and safety of the installation, in addition, it is recommended to ask a professional installer for installation.

1. Determine the size of the downlight and the size of the hole that needs to be cut in the ceiling.

2. According to the size of the opening, make a mark in the place where the hole needs to be opened, and then use the hole opener to bend the hole.

3. After the hole is opened, connect the downlight with the reserved buried shed in the ceiling to change the wire.

4. After connecting the power cord, put the downlight spring buckle vertically into the open ceiling hole, and the spring buckle on both sides of the downlight can be installed on the ceiling.

The downlight installation method is as follows:

Prepare tools and materials: downlights, wires, switches, electric drills, screwdrivers, electric wire leakage pliers, etc.

Determine the position of the fixture as needed and draw the location line on the ceiling with a pencil.

Make holes in the ceiling in sizes that match the size of the downlights.

Fix the downlight base to the ceiling, using screws. Roll is positive.

Connect the wires, thread the wires through the terminal on the base of the downlight, and connect to the power supply via a switch.

Test whether the downlight is working normally, and if there is an abnormal situation, it needs to be adjusted in time.

Finally, the ceiling cover is restored to its original shape.

Reserve the installation position of the downlight when decorating, buy the downlight back to Changsong, add a spring to the front brother lamp, press the springs on both sides of the spring, put it into the hole where the downlight is reserved, and then release the spring to install the Zheng downlight on the ceiling.

The easiest way to cut tiles is to use a specialized tile cutter. This tool can accurately cut tiles in a short time, and the cuts are neat and not easy to break. If you don't have such a tool, you can also use a cutter or a tiling blade. The specific steps are as follows:

1.Use a pencil or colored pencil to mark the lines to be cut on the tiles.

2.Place the tile on a flat surface and secure it with a clamp.

3.Follow the instructions of the tile cutter to adjust the tile cutter to the correct cutting depth.

4.Place the tiles on the cutter and cut the tiles to the desired size along the marked lines.

5.If you are using a cutter or a cutter blade, first carve a cutting line on the tile, and then use the cutter or blade to cut the tile to the desired size.

Notes:1Wear a mask and goggles when cutting tiles to avoid inhaling tile dust and eye injury.

2.When cutting tiles, pay attention to the cutting depth and cutting speed to avoid tile cracking or uneven cutting.

3.Keep your hands steady when cutting tiles to avoid hand injuries.

1. Before installing downlight lighting, be sure to carefully check the instructions to see what the size of the openings on the downlights and ceilings is.

2. It is recommended to use a small manual saw to determine the position of the downlight and ceiling opening, and make a mark, (if you are not fully sure, it is recommended to ask a professional master.) If the ceiling is sawn, it is very troublesome to maintain it in the later stage).

3. Connect the reserved power cord to the downlight, and if there is a wire, be sure to do a good job of insulation.

4. After connecting the power cord, fix the position of the downlight, pay attention to whether the spring blade is consistent with the thickness of the ceiling, and then carefully buckle the spring card in the downlight into the plate hole.

5. After fixing the position of the lamp holder, install the downlight bulb, so that the whole process of downlight lighting is completed.

6. Precautions for downlight installation.

1) Try not to be too close to the wall in the position of the downlight, because the downlight will generate heat when it is used; If it is used at close range for a long time, it is likely to burn the yellow wall and affect the aesthetics.

2) Don't choose downlights that are too bright, direct light for a long time will cause damage to the eyes; It is recommended to buy a lamp with a soft color feeling, which is warm and looks more comfortable.

3) When you receive the downlight, check whether the parts inside are missing as soon as possible, and if you find a problem, find a dealer to replace it in time.

4) When installing downlights, remember to cut off the power supply first to ensure that the switch is closed, the purpose of this is to prevent electric shock accidents; When the test is on, do not touch the surface of the lampshade directly with your hands.

5) If you want to use the downlight for a long time, the installation position should ensure that the environment is dry and cool. If it encounters a humid and stuffy environment, it will not affect its service life, and may even cause downlight leakage and**.

6) The best voltage of the downlight is 110 220V, in the process of downlight use, try not to switch the power supply frequently, which will shorten the service life of the downlight.