How to reset or reinstall Windows 10

Unlike the system reset function in Win7, Windows 10 system reset automatically configures the installation files required for the user to restore the system, and the user no longer has to insert a USB flash drive, CD-ROM or configure the recovery image by himself. After upgrading to or reinstalling Windows 10, users can perform a system reset directly in System Settings - Update & Security - Recovery.

But there are still some problems with the reset function of Windows 10 - according to many user feedback, after upgrading to Win10, they encountered problems such as "Inaccessible Boot Device Error", "Infinite Restart", "Blue Screen" and so on during the reset system. Many users who have just upgraded from win7 to win10 may choose to reinstall it. In order to avoid similar troubles, it is recommended that you use the U disk installation method or the hard disk installation method to reinstall.

Win10 default reset operation and fresh installation effect is the same, users do not have to worry about the activation of the system after the new installation, as long as you upgrade from Windows 7 to Win10 after the system has been activated, it will be automatically activated after reinstallation.

Go to the merchant** to install it for you.

Before reinstalling the system, you should transfer the important files saved in the C drive to other disks, because after reinstalling the system, these stored in the C disk are gone, no matter what method you use to reinstall the system, this step is necessary.

Start reinstalling the system win10

Select Restore partition in OneKey Ghost,Select the Win8 system image that you just used to ** (the one in the tool raw material**) in the GHO Wim ISO image path,Look at the picture。

Then click OK (some people say that the OK point does not move, that's because you didn't click on the C disk), look at the picture, the picture is very clear.

After clicking OK, a prompt box will appear in the following figure, asking if you want to restart the computer immediately to restore, click Yes.

Then the system will automatically restart,After restarting, the interface shown in the following figure will appear,This is reinstalling the system,You don't need to do anything,Just wait patiently for the progress bar above to finish。

After the progress bar is finished, the computer will automatically restart, the reinstallation system win10 has been completed, and then it will enter the windows10 system, the system will automatically carry out the installation process, you don't need to do anything, just wait for the system to install automatically, and enter the desktop after the installation is completed. At this point, the reinstallation system win10 is completed.

You may need to restart after entering the desktop, so rebooting is sufficient).

Precautions. In the fifth step of the reinstallation process (when you walk into the bar), ensure that the power is not cut off.

Hello,After we upgrade win10 through different ways,There are still some remnants of the old system inside the system,The space of the computer C disk has become significantly smaller,These residues not only occupy space but also affect the running speed of the computer,In addition to the new reinstallation of the system,We can also sort out our system by resetting the system,So how to reset the win10 system?

1. Open the "Notifications" button at the bottom of the screen or go through the start screen to enter the computer's settings page.

2. In the settings page, find the "Update & Security" button, click it to enter the Update & Security page.

3. Click the "Recover" button, then find the reset secondary computer, and click the "Start" button.

4. Two options pop up, the first one is "Keep My Files", and the second one is "Erase Everything". If you want the reset system to be cleaner, you can select "Erase Everything".

5. Then wait for a while, the following page will pop up, prompting that your computer has multiple drives, and then ask you "Do you want to delete files from all drives?" "It is recommended that you select" only the drive with Windows installed, so that it will only be processed on the system disk, otherwise all the disks will be formatted, then you will lose all your files.

Note: There is a risk that the system reset will fail, so make a backup in advance before resetting.

Please elaborate on your situation, half a word will not help you solve the problem!

What machine you are and what machine the keys are different.

The steps are as follows:

1) The following interface appears when booting up, and press the key combination Ctrl+Shift+F3 at the same time. (Some models don't respond, you can try CTRL+SHIFT+F3+FN).

2) Wait patiently for the system to restart automatically, and do not do anything until you enter the following interface; At this time, do not click the "OK" button.

3) Drag this window to the lower right corner, just leave it alone, and wait for a simple look at the hardware parameters to no problem, then pull out the small window, click "OK", and return to the initial interface of starting Windows 11.

Xiaomi is an Internet company with mobile phones, smart hardware and IoT platforms as the core, with a wide range of products and services such as smartphones, smart TVs, and notebooks. We are committed to enabling everyone in the world to enjoy a better life brought by technology.

Founded in April 2010, Xiaomi is a mobile Internet company focusing on the independent research and development of high-end Zhiqin mobile phones, which was established by the top masters of former Google, Microsoft, Kingsoft and other companies. At present, it has received $41 million in investment from Morningside, Qiming, IDG and Xiaomi teams, of which 56 people in the Xiaomi team have invested $11 million, and the company is valued at 100 million US dollars. At the end of 2010, Mi Talk, a mobile phone real-name community, was launched, and the number of registered users exceeded 3 million within half a year of its launch.

In addition, Xiaomi also launched the mobile phone operating system MIUI, and the MIUI community reached 300,000 active users at the end of June of that year. On August 16, 2011, Xiaomi officially released Xiaomi mobile phones, Mi Talk, and MIUI are the three core products of Xiaomi Technology through the ** communication meeting.

1. Perform a virus and malware scan on your computer, then reinstall Windows. While the reinstallation process will overwrite any infected system files, files on other computers can be infected. Run a scan and then reinstall to remove the infection or remove the infected files so that they cannot re-infect your system after the reinstallation you have completed.

When the scan is complete, close your antivirus software before starting the reinstallation and turn it off until the process is complete.

2. By copying data to a flash drive, the external hard drive or the internal hard drive are separated'Partition partition from your Windows partition to get a backup copy of your documents, ** and other important data. If these options aren't available, back up your files using removable media, such as a writable disc. Other software, you will re-locate your Windows product key, the product key, which should contain the installation CD or Windows key, if it is connected to the Windows installed on your computer.

Write down details such as your username, computer name, and workgroup name, making sure they are entered correctly after completing the reinstallation.

3. Decide how you want to reinstall Windows. Gives you two options to choose from: a full?

For reinstallation, use the "Custom Installation Options" or "In-Place Upgrade Reinstall Use" upgrade installation option. A complete reinstall gives you the option to format the drive partition and reinstall it again though without formatting. In the same way that overwriting system files is overwritten during in-place reinstallation, upgrading to another version of Windows will not reformat the drive.

If you decide to format the drive, you will choose between full format to safely delete all the partition information and quickly format it to overwrite the previous data. Full format ensures that all previous data is complete? Full removal, but it takes longer than a less secure quick format.

4. Uninstall any service; Pack update you have installed before if you are not going to format the Windows partition. This is done by clicking on the "View Installed Updates" link, in the "Uninstaller" window, selecting the service you want to remove; pack update, click on the "Uninstall" button. Windows may not be correct?

Before restarting the installation process, the software will see that during the reinstallation process, unauthorized downgrades will not be removed if the service pack is updated.

5. Insert the Windows installation disc into your computer's *** drive. If you want to perform an "in-place upgrade reinstall, run from CD" file while running on Windows. If you plan to do a full reinstallation, restart your computer, and when prompted, press any key to boot from the disc in the *** drive.

The method is as follows: 1. Open the "Start Menu" in the lower left corner of Win10 and select [Computer Settings], as shown in the figure below.

2. After entering the computer settings, click to enter the [Update and Restore] settings at the bottom of the left side, as shown in the figure below.

3. Then in the win10 update and restore settings, select [Recovery], as shown in the following interface figure.

4. Next, click [Start] under "Delete everything and reinstall Windows", as shown below.

5. It should be noted here that the image file of Win10 installed before is used here, because the computer was previously installed with a USB flash drive, the image files are all in the USB flash drive, and Win10 factory reset needs to use the files in the copy image, so it will prompt: "Some files are missing", as shown in the figure below.

6. After that, insert the USB flash drive that installed win10 into the computer, and restore the operation again, then you can see the following "initialization" settings, and then click [Next], as shown in the figure below.

If you have the previous win10 system image file in the computer, you don't need to insert the USB flash drive where win10 is installed.

7. Next, you will enter the "Your computer has multiple drives" setting option, there are two options: [Install window drives only] and [All drives], you can choose according to your own situation. Generally, you can select [Install Window Drive Only] in the first item, as shown in the following figure.

8. There are some other options to choose from, just follow the prompts to select. Finally, we will enter the [Ready, you can initialize the computer] prompt, we can click [Initialize].

9. Finally, the computer will automatically restart, and after restarting the computer, it will enter the "Resetting the Computer (Progress Percentage Prompt)" interface, which will take a long time, and will automatically restart 2 times during the period. If you're a laptop user, it's a good idea to make sure the battery is fully charged or connected to a power adapter. After waiting for a long period of time,win10 can be successfully restored to factory settings,Finally enter the system settings interface,Here is the same as the initial setting of the newly installed win01,You can enter the new win10 interface after the setting is completed。