How to install a mechanical hard disk on a desktop computer

Desktop computer motherboards have multiple hard disk interfaces, and the current hard disk interfaces are all SATA interfaces, and one interface can be connected to one device. Some motherboards have 1 2 ports in a different color than others, that is the SATA3 connector, which is faster than the other SATA2 connectors.

Fix the SSD in a suitable position in the chassis first, and connect the data cable and power cable. If the motherboard has a SATA3 connector, connect the SSD cable there. If there is only a SATA2 interface, it is usually connected to the first one.

Boot up your computer with a USB stick or CD-ROM to partition, format, and install the system on the SSD. If the capacity of the SSD is not large, it is only divided into one area to install the system. The system must be installed on an SSD.

After the system is installed, install the mechanical hard disk into the host, and connect the data cable and power cable as well. If the HDD has been divided into zones before, I can already see the partitions in my computer after booting up, and it can be used normally. If the hard disk is also new, go to the disk manager after booting up, partition and format the hard disk, and it will be ready to use normally after completion.

When we use the computer, there will be a lot of file applications in it after a long time, and the memory will not be installed, at this time you will want to manually install a solid state drive or mechanical hard disk, solid state disk is more expensive than mechanical hard disk, and generally do not pursue read speed If you will choose to use mechanical hard disk, then how do we install mechanical hard disk, the following will share with you the method and steps of installing mechanical hard disk on desktop computers.

Solution: 1. In the chassis, find the position where the hard disk is installed, and fix the mechanical keyboard through screws.

2. The hard disk data cable must be connected to the fastest data port, that is, the SATA interface.

3. A single hard disk can be connected arbitrarily, as long as it is, if it is, it can only be installed on.

4. When the mechanical keyboard is installed with the SSD, observe the printing on the motherboard, the SSD is connected to SATA1, and the mechanical hard disk is connected to SATA3.

The above is the method and steps for installing mechanical hard disks on desktop computers, and users who want to install mechanical hard disks can operate according to the above methods.

Mechanical hard disk is a traditional ordinary hard disk, which is mainly composed of: platter, head, platter hinge and control motor, head controller, data converter, interface, cache and other parts. All the platters in the mechanical hard disk are mounted on a rotating axis, each platter is parallel to each other, there is a magnetic head on the storage surface of each disc, the distance between the magnetic head and the platter is smaller than the diameter of a human hair, all the magnetic heads are connected to a magnetic head controller, and the magnetic head controller is responsible for the movement of each magnetic head.

The head can move along the radius of the platter, and with the high-speed rotation of the platter at several thousand revolutions per minute, the head can be positioned at the designated position of the platter for data reading and writing operations. As a precision device, dust is the enemy of hard disks and must be completely sealed.

Here's how to add or install an HDD on your desktop:

Find the data cable of the hard disk, and the power cable, and then install it according to the position of the data cable and the power cable, the two lines are slightly narrower for the data cable, and slightly wider for the power cable.

3.Again, install the other end of the cable to the corresponding slot on the motherboard.

4.At this time, even if the hard disk is installed, you can turn on the power of the main chassis. Then it's time to install the system.

The first step is to fix the hard disk, how to fix it, it depends on how to set the hard disk position of your case, find a picture, everyone see. Inch hard disks are mostly fixed with left and right screws, and there are screw holes under the inch hard disk, and there are also left and right sides, according to the hard disk position of your own case.

The second step is wiring. There will be a bunch of SATA jacks on the motherboard, which may look like this.

Once you've found these interfaces, you'll need a SATA cable to connect them to the hard drive, which we can call a hard drive cable. Then, on the case power supply, find the power cable of the hard drive and plug it in.

Very simple. Buy a serial hard drive with a data cable. Open the case, plug the extra power plug of the hard disk power supply into the hard disk, and plug the data cable on the hard disk and plug it into the motherboard.

Secure the hard drive in the right place in the case. Boot. Next hard drive partitioning software, put the hard disk partition after installation, format, and live.

It's as simple as opening the case and connecting the data cable and power cable as an SSD.

Then turn it on, and generally the partition on the old hard disk will be displayed after booting.

Summary. Dear, hello, a blessing, a warmth, a touched, with a grateful heart, life is moved, your question has been received, typing takes some time, please wait a while, please do not end the consultation, you can also provide more effective information, so that I can better solve your problem, immediately for you to sort out the answer please wait a while!

The computer is equipped with a mechanical hard disk, how to operate it in the future.

Dear, hello, a blessing, a warmth, a touched, with a grateful heart, life is moved, your question has been received, typing takes some time, please wait a while, please do not end the consultation, you can also provide more effective information, so that I can better solve your problem, immediately for you to sort out the answer please wait a while!

Dear, hello, I am glad to answer for you that the computer is equipped with a mechanical hard disk, how to operate in the future to answer the hard disk, into the system. Computer --- management --- disk management. You'll see a black bar area with a capacity of about 93GB, which is your hard drive, right-click on it to format it and create a new partition.

Dear, if my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!