The computer is recruited, please ask the master how to solve it

rundll32 is the host program of the windows dll file,There is generally no problem,Of course, there are a lot of viruses and Trojans will also run through this process,It is recommended to use the windows cleaning assistant to check and kill it,If you have a high-level friend, you can also use icesword to check what modules are。

How do you know how to solve it without antivirus? Let's talk about drug investigation.

It should be fine. It's just running 32-bit DLLs. Generally, it will exit by itself after running. There will be no problem with the end. But banning with hips can be very problematic.

It is a program that controls the login of your system, and logon means logon. If you feel that the startup is much slower than usual, it means that your machine is very likely to be infected with poison and need to kill the virus.

It is recommended to use 360 antivirus software for virus scanning;

1 possibility that the logic of the original login program is broken, and there will be a blue screen, which is a sign of a virus, 2 possibilities, some parts of your hardware are not properly configured, 3 possibilities, some of your hardware is installed with mismatched drivers, 4 possibilities, you have to overclock the machine, resulting in a certain load that cannot bear a certain load, and crashes.

There are 5 possibilities, you have to have some hardware that may not be plugged in properly, or damaged, and the hardware needs to be upgraded, and 6 possibilities, you have to have the operating system need to be updated, and some hardware cannot be recognized, or the driver is upgraded.

Reinstalling the system will solve the problem.

Software and some hardware are incompatible.

Normally, this one is fine.

Press F1 and then keep pressing Next Next to enter is the next step.

This is obviously the loss of system files, just reinstall the system.

You're going to buy a new system disk.

This is the computer self-test screen. Generally speaking, when the computer is in good condition, it is the last time the computer was shut down abnormally - such as a sudden power outage during use. There are also changes to the computer hardware – such as the addition of memory modules.

There is also hardware damage, poor contact, etc. Coupled with the blue screen during the self-test, it means that there is a problem with the hardware.

First of all, remove the dust for the computer, use an eraser to wipe the gold fingers of each board card, especially the memory module to plug and unplug a few more times. If not, use the minimum system method and elimination method to find the problem hardware step by step.

Let's talk about the problem first, the real one is the system self-test, and the cause is basically caused by abnormal shutdown and power failure!

Your current solution can only wait, if the blue screen is the case, you can only reinstall the system, you are already a system file corruption, save the backup data before reinstalling the system!

There are two possibilities: hard drive corruption and system corruption.

1. Redo the system directly to see if it can return to normal.

2. If you can't redo the system, change it to a hard disk.

The above picture is a boot POST, which is generally caused by abnormal shutdown or a problem with the hard disk.

1. After the self-test is completed, the blue screen cannot enter the system normally, you can try to enter the safe mode.

2. Check whether there are bad sectors in the hard disk in PE. Reinstall the operating system.

3. If there are many bad sectors in the hard disk, it is recommended to replace the hard disk.

This is a self-test repair of the hard drive.

You can wait for the PC self-test to complete.

If a blue screen appears after the self-test is completed, it is recommended to try to start with PE to back up the data files on the hard disk. Then reinstall the system.

After installing the system, it is still the same problem, it is recommended to detect the hard disk. Or try replacing the hard drive.

From **, the system is testing the disk, please be patient.

Dusting The main chassis is dusted The CPU or graphics card is overheating.

The blue screen of 7b** is the wrong hard drive mode.

Boot into BIOS settings, go to Advanced settings, hard disk settings, find the option like IDE AHCI, change to another one, press F10 to save and restart.

Install SATA driver or go to BIOS to change SATA operation to ATA