-
The working principle is to put the mobile phone LCD screen and the glass cover plate in the vacuum box, use the cylinder pressure of the machine to lower the inner mold of the vacuum cylinder, and completely press the glass cover plate and the LCD screen under the vacuum cylinder, which is to use PLC as the control center of the whole system. To achieve the whole process of attaching operation.
The PLC is used as the control center of the whole system, and the PLC outputs the pulse control pneumatic components by the specific pulse output port, so that the LCD alternate rotating platform moves accurately to the specified position in the circular direction according to the predetermined position.
-
Principle: PLC is used as the control center of the whole system to realize the whole process of attaching operation.
A programmable memory is used to store instructions for performing operations such as logic operations, sequence control, timing, counting, and arithmetic operations, and various types of mechanical equipment or production processes are controlled through digital or analog inputs and outputs.
When a programmable logic controller is put into operation, its working process is generally divided into three stages, namely input sampling, user program execution and output refresh. Throughout the operation, the PLC's CPU repeats the above three phases at a certain scan speed.
-
The working principle of the screen pressing machine is to place the mobile phone LCD screen and the glass cover plate in the vacuum box in the vacuum environment, use the cylinder pressure of the machine to lower the inner mold of the vacuum cylinder, and completely press the glass cover plate and the LCD screen placed in the lower mold of the vacuum cylinder.
The biggest difference of the automatic OCA vacuum laminating machine is that the machine itself adds automation hardware, which makes the tray automatically imported and automatically exported after pressing, and for some factories, it will be more convenient and fast for users with large quantities.
When separating and removing the glue, pay attention to the wire, when separating the cover plate, when separating the steel wire and separating the screen line, you need to pay attention to the wire not to hurt the wire, and you also need to pay attention to the wire when cleaning the residual glue, and many problems are also in the separation and glue removal here.
Paste OCA glue or polarized light as much as possible to avoid bubbles, before sticking OCA to ensure that there are no bubbles or tiny bubbles, too many bubbles and then fit and defoam the effect is not good.
-
The main working principle is to use PLC as the control center of the whole system to realize the whole process of attachment operation, PLC by the specific pulse output port output pulse control pneumatic components, so that the LCD alternate rotation platform according to the predetermined position to do the circular direction of accurate movement to the specified position.
Mainly for the hard-to-hard combination between optical and rigid materials, such as optical double-sided tape (OCA) bonding between two layers of glass substrates, and the components are pressed together under vacuum, which effectively overcomes the process defects such as bubbles and rainbow patterns, and is a necessary process in the combination process of touch panels.
-
The principle of Zhan Wangxing screen pressing machine is to put the mobile phone LCD screen and glass cover plate in the vacuum box in the vacuum environment, use the cylinder pressure of the machine to lower the inner mold of the vacuum cylinder, and completely press the glass cover plate and the LCD screen placed in the lower mold of the vacuum cylinder. In order to complete the key process in the repair of mobile phone screens, that is, the "OCA lamination process".
-
1. The main purpose of the screen pressing machine is to replace the LCD screen. It is also called a mobile phone screen presser.
2. After the mobile phone with a broken screen is turned on, it can be used as usual, it can be displayed, and the touch is also sensitive, which is generally broken is the outermost protective glass. The cover glass of most mobile phone screens is replaceable. The so-called "pressure screen" is to replace the outer protective glass.
3. The mobile phone screen is divided into protective glass, touch screen and display screen from the outside to the inside, as long as the protective glass is broken, it can be done with the screen pressing device. If even the display screen is broken, then you can't just replace one piece of protective glass, you have to replace it all.
The tools and materials required for screen pressing are not complicated, mainly a set of professional equipment and mobile phone glass. Before pressing the screen, use a separator to separate the broken mobile phone glass from the body, and then use the device to press the new glass screen and the mobile phone together, the process only takes about 20 minutes.
4. Although the screen pressing is cheap, it is still recommended that users use the original screen. The screen of the pressure screen is produced by non-original manufacturers, and there is not only a difference between the two, but also a gap in quality. Not only the gloss, but also the sensitivity of the screen will be a little worse.
-
Repair the mobile phone LCD machine (also called the screen press).
-
The role of the screen pressing machine:
1. OCA glue can be used to fill the gap, and the display panel is closely attached to the touch screen, so that dust and water vapor have nowhere to enter, and the cleanliness of the screen is maintained.
2. It can be fixed directly by buckle or lock screw, which can reduce the assembly problems caused by fitting deviations, and at the same time simplify the assembly process and reduce the assembly cost.
3. The use of screen pressing machine can realize the optical glue between the touch screen and the display screen, only increasing the thickness of 25 m-50 m, and the thinner body improves the product grade and highlights the technical content.
4. The screen pressing machine equipment is equipped with a multi-directional fine-tuning device, so it is also suitable for products of different shapes, and with special fixtures, it can also fit products with irregular shapes such as arcs and diamonds.
The screw conveyor is to use the rotating screw to move the conveyed material along the fixed casing and carry out the conveying work, the head and tail bearings are moved to the outside of the shell, the lifting bearing adopts the sliding bearing and is equipped with a dustproof sealing device, the bearing generally adopts powder metallurgy, the cement is conveyed with felt bearing, and the hanging shaft and the screw shaft are connected by slider. The screw conveyor is generally composed of three parts: the conveyor body, the inlet and outlet and the driving device; The spiral blades of the screw conveyor have three forms: solid spiral surface belt spiral surface and blade spiral surface, wherein, the application of vane spiral surface is relatively rare, mainly used for conveying viscosity and compressibility materials, this spiral suspension type, in the process of completing the conveying operation, has and completes the functions of stirring and mixing of materials at the same time. Compared with other conveying equipment, the screw conveyor has the advantages of small cross-sectional size, good sealing performance, stable and reliable operation, multi-point loading and unloading in the middle, safe operation and easy maintenance. >>>More
Let me tell you the principle of the manual, there is a square electronic instrument on the wristband, only he is the core part of the entire anti-snoring device, and he can solve the snoring problem. >>>More
Hello, you can get to know the OPPO model.
The screen-to-body ratio of the RENO standard version is matched with the new AMOLED light-emitting material, which can fully cover the DCI-P3 color gamut and has 8% power consumption optimization. >>>More
Hello landlord. There's no good answer, bother me.
F3 good car is worthy of that ** feature: it is fuel-efficient, the market has a large amount, spare parts will not be lacking in the future, and there are many special service stores. Chinese people should also support their own brands.