-
Anonymous users2024-02-07First, turn off the Mi 5X, then take out the card pin in the box and insert it into the card pick-up hole on the left side of the phone; Then put 1 or 2 prepared Nanao SIM cards into the removed card tray, and when you are done, you can put the card tray back on your phone. The details are as follows:
1. First turn off the Xiaomi Mi 5X, then take out the card pin in the box, insert it into the card hole on the left side of the phone, and push a little hard to eject the card tray;
2. Put the prepared 1 or 2 Nanao SIM cards into the removed card tray, and then put the card tray back into the mobile phone after completion;
3. Finally, it is used when it is turned on, generally if the card is installed correctly, the mobile phone can normally recognize the SIM card.
-
Anonymous users2024-02-06Network standard. Full Netcom:
Dual nano-SIM card slots, any card slot can be set as the primary card.
Support mobile, China Unicom, China Telecom 4G + 4G 3G 2G
The primary card can support the 4G network of any operator, and China Unicom can support the 3G network as an auxiliary card.
2 telecom cards cannot be used at the same time: One card can use the 4G network when used at the same time, and the other card will not be able to register the network.
SIM card type.
Xiaomi Mi 5X supports dual SIM dual standby, and the dual SIM card slot is a Nano SIM card, which is the smallest mini card.
Xiaomi 5X SIM card installation method steps:
1. First turn off the Xiaomi Mi 5X, then take out the card pin in the box, insert it into the card hole on the left side of the phone, and push a little hard to eject the card tray;
2. Put the prepared 1 or 2 Nanao SIM cards into the removed card tray, and then install the card tray back into the mobile phone.
Finally, it is used when it is turned on, generally if the card is installed correctly, the mobile phone can recognize the SIM card normally.
-
Anonymous users2024-02-051. First turn off the mobile phone, after the mobile phone is turned off, use the card pin to take out the mobile phone card slot.
2. After the card slot is taken out, according to the size of the card slot, cut the SIM card, and see the SIM card model required by the mobile phone, and different models of mobile phones have different requirements for the size of the SIM card.
3. After cutting the card, put the SIM card into the card slot, pay attention to the correct alignment of the direction, generally the card slot will have an anti-crooked device, and it will not be installed wrong if you are careful.
4. Then insert the SIM card back into the mobile phone, finally turn on the mobile phone, and wait for the mobile phone to detect the network signal before use.
Other things to note about inserting a card.
1. Please do not use scissors as a card cutting tool, it may cause damage to the SIM card chip.
2. Please do not use the card sleeve, which may cause damage to the SIM card chip and poor contact with the mobile phone.
3. The SIM card cannot be directly inserted into the mobile phone, and it must be inserted into the card tray before the mobile phone can be inserted.
-
Anonymous users2024-02-041.Shoubo Ling first found the card pin that came with it in the Xiaomi 6X box, if you accidentally lose it, you can also use the SIM card pin of other mobile phones, which are generally compatible.
2.The SIM card slot of the Xiaomi Mi 6X mobile phone is located in the upper part of the bedrock on the left side of the fuselage, use the card pin to insert it vertically into the small hole next to the SIM card slot on the left side of the fuselage, and push it a little harder, you can eject the card tray, and then remove the SIM card slot.
3.Put the nano-SIM card single or dual card prepared by the jujube imitation into the card slot, and then install the card tray back into the Xiaomi 6X mobile phone.
4.If the phone is turned on, the network can be recognized later. If the mobile phone is turned off, you can generally see that the mobile network can be successfully identified after turning it on, and you can start the journey of using the new phone.
-
Anonymous users2024-02-03The method of installing the SIM card of the Xiaomi Mi 5 is almost the same as that of the Xiaomi machine of the all-in-one phone. Here's a detailed description of how to do it:
1. First of all, you need to find the location of the SIM card of the mobile phone.
2. Then prepare the clip needle and insert the clip into the pinhole of the card slot.
3. Then pop out the card slot and place the SIM card in it.
-
Anonymous users2024-02-02The card slot of the Xiaomi Mi 6x** card is on the side of the mobile phone, the back cover of the all-in-one machine cannot be opened, there is a small hole next to the side card slot, and the card slot will pop up when you push it with a thimble, and you can put two SIM cards inside.
-
Anonymous users2024-02-01How big can it be?
-
Anonymous users2024-01-31How to install a SIM card in Xiaomi mobile phone 5?
The parameters of Huawei nova are as follows:
1. Screen: Nova uses a 5-inch FHD negative LCD screen, transparent and bright curved glass, which makes the visual sense closer to reality, and an eye protection mode, which can filter blue light radiation, adjust the color temperature and brightness, and give comfortable care to the eyes. >>>More
Personally, I recommend the Xiaomi Mi 5x, but both phones are actually fine. >>>More
Jicao lozenges adopt "Cordyceps sinensis insect body and sub-base are crushed separately, cell-level ultra-fine membrane breaking and wall breaking technology", so that the release of active ingredients of Cordyceps sinensis ultrafine powder is 7 times higher than that of the original grass; "100% pure powder additive-free tableting technology", unique lozenge form, innovative Cordyceps sinensis oral inhalation, mucosal absorption of new methods, ultimate absorption, rapid effect. The rapid release of Cordyceps sinensis herbal medicine was realized, which changed the backward situation of low absorption rate and large amount of waste of Cordyceps. >>>More
According to、The first official China (to the United States) on MIUI. MIUI China),**The latest development version of the ROM, as shown in the following figure II,**In line with the latest development version of the mobile phone model complete package, as shown in the following figure Third, the Xiaomi mobile phone is connected to the computer, and the development version of the complete package is copied to the downloaded ROM directory of the mobile phone, as shown in the following figure Fourth, find the system update on the Xiaomi mobile phone, as shown in the following figure 5, after entering the system update interface, click the function key on the left side of the Xiaomi mobile phone, and then select the installation package, as shown in the following figure Lu, Find the full package file of the development version that you just copied into the phone in the downloaded rom directory of the phone, as shown in the following figure, and then click Update Now or start the update, as shown in the figure below, the system will start to update automatically, and then restart it, and the system will restart the phone after the update, and then find the security center on the Xiaomi phone, and then find the authorization management, as shown in the following figure Note: If the phone does not have a security center, just find the authorization management directly 9, open the allow application to get root access and you're done, as follows.
It should be released in January-February.