Patek Philippe watch sapphire crystal scratches

Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.

Localized deep scratches on the case or bracelet, with emphasis on grinding the local precursor stones. This must be done under a magnifying glass. The aim is to polish the wound evenly.

After the scratches are basically sanded, choose sandpaper with the right grain size and polish along the original sand pattern, usually the pattern radiates from the center of the dial, so this is very lively. It is more effective to polish it little by little.

Technically, all the brushes must be oriented and radiate from the center of the dial. For scratches on the case and strap of all watches, to remove or refurbish them to the look of the watch, see this method. Straight-line ropes are easier to handle, but if the rope is concentric, it should still be made using a machine with an electric system.

If there are a lot of scratches, it is a fake watch, and it is definitely not a sapphire.

There are only a few pieces, and it is possible to rub against other hard objects (such as diamonds, jadeite, etc.), so let's get a new lens after sale.

For local deep scratches on the case or strap, it is necessary to do local treatment before repairing, such as the case side of the case, and it is even possible to use a fine small file, more often with a stone stone, and then under a magnifying glass, carefully boring the deeper scratches.

It is not difficult to fix the scratches on the case strap with sandpaper yourself, as long as you are careful and steady. However, regarding the surface is a polishing process, it is necessary to use a cloth wheel polishing machine, and it is recommended to send it to the brand after-sales service or other watch repair institutions to find professionals to deal with it.

1. The first thing is to stop the watch. Pull out the handle and stop the operation of the watch. Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards.

2. I can't pull out the needle and the fast-setting calendar, and I don't ask the broken glass that I can try to remove the dial by myself.

3. When sending the watch shop for repair, the watch should be placed flat (preferably with the glass facing down) into the box, and no violent vibration and shaking should be produced on the way to the repair version.

4. During the maintenance process, it is necessary to tell the rights protection personnel not to let the glass fragments scratch the dial and watch hands.

If the watch is scratched, it can be done by grinding, wearing, and polishing the worn watch to look brand new. If there is a serious bump that causes hard injuries, smashes and dents, the repair process is relatively complicated, and you need to bring the watch to a professional watch repair center for repair.

Daily maintenance method of the watch:

1. Do not open the back of the watch at will, so as not to affect the normal operation of the watch.

2. Don't put your watch in the closet, mothballs will make the watch oil deteriorate.

3. Do not put the watch on the amplifier, stereo, TV, so as not to magnetize.

The sapphire mirror of the watch is scratch-resistant, generally will not be scratched, it must have touched some hard object, the sapphire surface is scratched, and the general grinding paste can not be removed, so you can only go to the brand shopping mall to repair, and the crystal mirror polishing, polishing and other processes can be repaired.

Sapphire mirrors are resistant to abrasion, but they cannot withstand strong impacts, and some materials of the same or higher hardness (e.g. grinding stones, sandpaper, nail chips, granite surfaces, concrete walls and floors, etc.) may scratch the surface of these materials.

Sapphire is a common name for corundum gemstones in addition to red ruby, and the main component is alumina. Sapphire glass refers to synthetic sapphires that can be easily and inexpensively produced in the laboratory to produce gem-quality sapphires with the same chemical composition and physical properties as natural sapphires.

For local deep scratches on the watch case or strap, it is important to polish the part with an oil stone first. This needs to be carried out under a magnifying glass, the purpose is to evenly smooth the scratches, when the scratches are basically ground to be smoothed, choose sandpaper with the right particle size, and grind along the original sanding pattern, usually this line is radial with the dial as the center, so this is a careful work, to a little bit, the grinding effect will be good and realistic. It is recommended that sandpaper be used in the jewelry industry, preferably imported.

On the technical side, it is necessary that all the sand patterns go all the way around, and they all start from the center of the dial and are radial. All scratches on the case and strap of a watch can be removed in this way if you want to remove it or refurbish the appearance of the watch. The straight-line shape of the pattern is easier to do, if the pattern is concentric, then it should still be done by using electric machinery.

However, it is recommended that it is best to send it to a regular after-sales service to deal with it.

Hello, if the scratches are not very serious, you can try to deal with them yourself first:

After the watch mask is scratched out of a lot of lines, you can drop one or two drops of water on the watch mask, and then squeeze a little toothpaste to wipe it, you can remove the scratches and make the watch mask as new.

If the scratches are serious, you can go to a professional repair point to find a professional maintenance master to take a look.

Hello, glad to answer for you!

How to repair the mirror surface of the watch:

If there are scratches or slight scratches on the mirror surface of the watch, you can drop one or two drops of water on the mirror first, then squeeze a little toothpaste to wipe it, and then wipe it back and forth with a cotton ball, you can remove the scratches and make the mirror as new. (It is not recommended to repair in this way, it is recommended to go to a professional maintenance center for repair!) ）

Hello, if the scratch is not very serious, you can try to deal with it yourself:

After the watch mask is scratched out of a lot of lines, you can first drop one or two drops of water on the watch, and then squeeze a little toothpaste to wipe it, and then you can remove the scratches and make the watch mask as new.

If the scratches are serious, you can go to a professional maintenance point to find a professional maintenance master to take a look.

Shanghai Famous Watch Service Center Repair service: watch water, watch damp, watch fast, watch slow, watch stop, watch not go, movement rust, dial rust, case rust, luminous failure, time failure, watch magnetization, loose back cover, circuit failure, return to the factory service.

Solution:

1. When there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe back and forth with a cotton ball to remove the scratches and make the watch glass as new.

2. If it is serious, you can polish it.

3. Find an official after-sales service center.

We asked him to stop the watch immediately, first pull out the crown, and then place the watch in reverse and place the watch mirror side down, and send it to the watch repair shop to repair, the general lens crack is recommended to be sent to the watch shop for repair in time, do not adjust the time and operation by yourself, to avoid secondary damage to the watch, such as glass scratching the dial, glass bending hands, etc., in the matter of sending to the watch store, you also need to remind the maintenance personnel, you need to pay attention not to scratch when repairing, etc., Because the repair cost of scratching the dial is much more expensive than the cost of replacing the glass. If your watch is not broken but the corners are broken, you can not go to the watch store to deal with it immediately, but there are certain potential safety hazards, and the waterproof performance of the watch will be weakened, and the watch glass may enter water or dust if it is not treated in time.

Treatment method of epidermal rupture:

1. Pull out the watch handle and let the watch stop.

2. How to deal with the crackage of the watch? Never dial the hands, nor can you quickly adjust the calendar3, the watch is placed flat (preferably with the watch masked facing down), and the watch should be placed flat until it is sent to a watch repair shop.

4. Do not do violent vibration and shaking during this period.

5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.

Severe damage to the glass will cause the watch to be unsealed, which will affect the waterproof function. In order to avoid further damage to the dial, there are some remedial measures that should be taken when encountering such a situation:

1. Pull out the watch handle and let the watch stop.

2) Never dial the needle, nor do you adjust the calendar quickly.

3) Lay the watch flat (preferably with the glass side down) until it is sent to a watch repair shop.

4) Do not shake violently or shake.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

Hello, it is recommended that you go to a professional maintenance point to find a professional maintenance master for polishing.

How to repair scratches on the surface of the watch.

1. There is only one way to remove the scratches on the watch perfectly, that is, grinding and polishing, but the cost of grinding and polishing is generally relatively high. For watches of relatively low value or scratches that are not very obvious in the first place, then there is no need to spend a lot of trouble and repair shops to polish them.

2. If there are slight scratches on the watch glass, then we can also deal with it ourselves, and the tools for handling it are relatively simple, requiring a toothpaste and rag. Drop a drop or two of water on the mirror, squeeze a little toothpaste, and gently wipe it with a rag to remove the scratches and make the mirror look like new, which can also be used on the case.

Patek Philippe Watch Aftermarket Repair Center: 400-659-0877

After wearing a Patek Philippe watch for a long time, a lot of dirt can develop on the surface and seams of the metal band, so the strap of the watch needs to be cleaned regularly. If you don't want to go to a watch repair shop, you can wash it at home. It's just a hassle, because Patek Philippe mechanical watches can't touch water here, so it's even more troublesome.

If you send it to a professional watch repair shop for repair, a professional ultrasonic cleaner will be used. The cleaning solution is the addition of detergent to the water. Depending on the degree of dirt and severe dirt, you need to clean it a few times before using it.

Rinse with clean water, dry with an electric fan, and remember to wipe the strap clean.

Dust and scratches on the exterior parts of Patek Philippe watches, if the scratches are relatively minor, can be slightly polished by a cloth wheel polisher, if the case and strap are polished, they can be treated with polishing, if it is a lars process, after polishing, it is also necessary to use sandpaper to draw along the original grain. It is more difficult to operate, so it is recommended not to try it yourself.

If the scratch is too deep, it needs to be seriously polished, which may make the watch thinner.

If polishing does not address the deeper scratches, it will need to be repaired with metal of the same material.