Patek Philippe repair center scratch treatment?

Hello, glad to answer for you!

If the watch is scratched, it can be polished, worn, and polished to make the worn watch look new. If there is a severe bump that causes hard injuries, smashes and dents, the repair process is relatively complicated, and you need to bring the watch to a professional watch repair center for repair.

Treatment: 1. When there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball, you can remove the scratches and make the watch glass as new.

2. If it is serious, you can polish it.

3. Find an official after-sales service center.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

The watch service center is located in [Room 1207, 12th Floor, Block B, China Resources Building, Mixc, Jianggan District, Hangzhou] HBLZJ001TB

Patek Philippe Watch Care Center: 400-659-08771, ordinary mechanical watches are damp, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it near a 40-watt light bulb about 15 cm, bake for about 30 minutes, and the water vapor in the watch can be dissipated. Do not bake the watch close to the fire, so as not to deform the watch by heat.

2. Put the surface face inward, the bottom shell facing outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

3. Put the granular silicone into a closed container with the watch that has accumulated water, and after a few hours, take out the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch. The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

What to do if there are scratches on the mirror of the watch:

If there are scratches or slight scratches on the mirror surface of the watch, you can drop one or two drops of water on the mirror first, then squeeze a little toothpaste to wipe it, and then wipe it back and forth with a cotton ball, you can remove the scratches and make the mirror as new.

Another method is sandpaper wiping. You can choose a piece of sandpaper, try to use relatively clean pliers when taking the sandpaper, and then, use pliers or other tools to clamp the selected sandpaper, find the texture of the glass surface of the watch, and then wipe it gently.

The mirror surface of some watches is easy to scratch, so you should pay attention to maintenance and protection when wearing it to avoid bumps. Minor scratches on the mirror of the watch can be removed by yourself, when the scratches are more serious, or you can't solve them, it is best to take them to a professional watch repair shop to avoid greater losses caused by improper treatment.

Watches, like other precision instruments, require regular maintenance to ensure perfect operation. The maintenance interval of a watch should generally depend on its natural rate of wear and tear, but another important factor depends on the daily use of the watch and the environment in which it is worn. It is recommended to come to the repair center every year to test the waterproof performance of the watch, and maintain it every 2-3 years.

At present, in order to better serve Chinese customers, our watch brand has set up a China Repair Service Center to provide better watch repair services for Chinese customers.

If the watch needs to be repaired or maintained, or other needs, it is best to go to after-sales, which not only has a more professional technician and better service, but also its instruments will be more precise. ** It will not be reported like other places, there are standards. The after-sales service is on the seventh floor of Tower A on the side of Wanling Hui.

If the back cover is opened in a non-designated place, it will not be eligible for the warranty.

Hello, glad to answer for you!

There are many parts inside a mechanical watch that are made of steel, such as a hairspring, large and small steel wheels, screws, bearings, and escape wheels, which are easily magnetized by magnets, magnetic fields, etc.

The speed of a watch is controlled by a hairspring, one of the most magnetized parts, and a balance wheel.

When the watch is in contact with the magnetic field, the hairspring is magnetized, which will adsorb and stick together, making the balance wheel oscillate at a frequency. Install the battery, be careful not to get other parts, and check that the watch is working properly. If the pointer turns normally, then there is nothing wrong with it.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

Patek Philippe selects talented professional watchmakers, and every professional who repairs a timepiece must have full respect for the timepiece itself, its history and its owner. Patek Philippe guarantees that your watch will be consistently cared for and maintained, guaranteeing its enduring value and reliable performance for generations to come.

As the last independent watchmaker in Geneva, Patek Philippe enjoys the freedom to innovate throughout the design, production and assembly process, creating masterpieces of global horology that have been praised by the world's experts, and in keeping with the vision of the brand's founders, Messrs. and Philippe, with exceptional expertise and a tradition of quality innovation, Patek Philippe is the "blue-blooded aristocracy of watches".

Patek Philippe Classics:

1. Commemorative edition table.

1999 was a particularly important year for Patek Philippe in the development of women's watches. The Twenty-4 collection has a unique appeal to many cheerful modern women, who are always looking for timepieces that match their modern lifestyles. The arrival of sleek and sophisticated, timeless and elegant watches not only perfectly complements their formal attire at work, but also shines when attending dinner parties.

2. Nianzheng watch.

Patek Philippe**, the new image of the Calendar Two-Hand and One Line Corrected Watch, is the first Patek Philippe watch to have a "corrected" dial. **The watch is equipped with an annual calendar display, which displays the month, day and date in an aperture, one of Patek Philippe's most popular complications.

3. Peacock watch.

The pink gold version of the "Peacock" features a cloisonné enamel and pink mother-of-pearl dial painted with 60 cm long gold wires, 12 opaque or translucent enamel colours and French colours, which are roasted in at least 12 times and take up to 45 hours.

Rose gold lancet-shaped hands, bezel and lugs set with 113 diamonds (approx.); Ardin buckle set with 29 diamonds (approx.); Satin strap for a soft and comfortable fit; Power is provided by an ultra-thin self-winding movement; The sapphire crystal case back reveals the elegant rhythm of a precision movement.

The above content reference: Encyclopedia - Patek Philippe.

Block 2, Grand Gateway Center, No. 3 Hongqiao Road, Xuhui District, Shanghai.

Patek Philippe watch after-sales repair service process:

1.Make a reservation online or call the service** to confirm your arrival date.

2.Take your watch to a service location.

3.A professional watchmaker will carry out a pre-inspection of your watch to confirm the problem with your watch and the services required.

4.Our service specialist will tell you about our service plan, once you confirm the maintenance, your watch will enter the normal maintenance process, please do not cancel the service.

5.Our professional repairers will carry out professional maintenance according to the problem of your watch.

6.Once all maintenance is complete, your watch will pass our quality inspection process before it can be considered complete.

7.The service store will send you a text message to inform you to come to our front desk to pick up your watch.

8.If there is a cost involved in the purchase of your watch, please pay for the maintenance at the time of pick-up. If the document is lost, please be sure to report the loss to the front desk of the service store or call the 400 service store** to report the loss.