Please point out how to make the virtual machine and your own physical machine share the network

Since you're using virtual dial-up broadband. Therefore, it is necessary to let the virtual system and the physical machine share to form a network. You need to set the IP address of the physical system NIC to fixed.

Then set the IP address to the same network segment in the virtual machine. The setting mode is as follows: use a physical network NIC.

1. VMware can virtualize the physical machine, the operation step is to first open VMware 10, and then click the virtualization physical machine button under the home page:

<>4、Then enter the name of the virtual machine and the storage location of the virtual machine file, you can choose according to the needs of Zheng Pai, here select the default name and location, click on the next step:

5. Then ask for the username and password of the computer, and then click Done

6. The most software will automatically virtualize the physical machine, and it may take a long time if the physical machine has more files

1. VMware can virtualize the physical machine, the operation step is to first open VMware 10, and then click the virtualization physical machine button under the home page:

5. Then ask for the username and password of the computer, and then click Done

6. The most software will automatically virtualize the physical machine, and it may take a long time if the physical machine has more files

No, virtual machines are not fully virtual physical machines, and their hardware environments are different from those of physical machines. In addition, VMware does not have the ability to "directly make a system on a physical machine into a virtual machine".

It doesn't seem to work, I'm using a mirror reload.

If you want to be the same as a physical machine, you can find the system disk of the physical machine and install it on the virtual machine.

Some motherboards support virtual operation at the BIOS level and install the operating system. You can find out from the motherboard manufacturer. Generally, ASUS motherboards seem to have been pushed, and now there is no certainty.

As you added later: there is no problem with restoring files after ghost to **. Unless the drive is incomplete, it can be driven on the follow-up.

Yes, I'm using VM8, and there's a selection under the "File" option, and then a software will be automatically installed, and you can use it. Now I'm in class, and I'll give you a supplement when I go back to the dorm after class

There are several ways:

Bridge: It can realize the mutual access between the physical host and the virtual machine, and realize the virtual machine to connect to the Internet, using the VMNet0 virtual switch. The IP address of the virtual machine and the IP address of the host are in the same network segment, and the parameters such as subnet mask, gateway, and DNS are the same, so you need to ensure that there are redundant IPs in the LAN when using the bridging mode.

Network Address Translation (NAT): It can also realize the mutual access between physical hosts and virtual machines, and realize that virtual machines can connect to the Internet, using VMNet8 virtual switches. We'll describe the NAT settings in more detail later.

3. Host-only: used for mutual access between the host and the virtual machine, all virtual machine systems communicate with each other, if you want to access the Internet

The internet can be shared through a host.

References.

Isn't the installed virtual machine network a common network for this computer?