What are the plugging materials? How many types of grouting materials are there?

There are two kinds of plugging materials: one is inorganic plugging, such as cement, water glass, etc.; The second is organic leak plugging, such as organic silicone (BXHT super waterproof adhesive), EPDM rubber, tape, etc.

1. According to the performance, it can be divided into two kinds, one is cement grouting, and the other is chemical grouting, the more common ones are acrylic, epoxy resin, etc.

2. According to the physical state, it can be divided into three kinds, one is CQ102, CQ103 and other waterproof coatings, the other is RQ301, RQ302 and other waterproof agents, and the third is waterproof membranes, such as polyethylene polyester, PCM self-adhesive membranes, etc.

Precautions for plugging and grouting construction

1. When carrying out construction, first of all, we must ensure the perfection of safety measures, wear protective gloves and goggles in accordance with the regulations, and select grouting materials, water-stopping needles and other accessories specified by the manufacturer. When the grouting machine is not required to be used continuously, it should be cleaned with an acetone device after the construction is completed to avoid the residual agent being on the machine for too long and causing damage to the machine. If it is no longer used after cleaning, you can use oil to pour oil into the machine to lubricate it.

2. The work can not be overloaded, exceeding the original limit of the machine, resulting in an increase in pressure and greater damage to the machine, especially these materials will contain particle components, such as gravel, cement blocks, etc., so pay attention to the capacity. Overloaded work is likely to cause the machine to break, the high-pressure pipe to burst, the pressure gauge to receive damage, etc.

3. If the machine does not rotate, you can pour out the material in the barrel first, remove the internal blockage, or update a new pump, and at the same time do a good job of sealing and tighten the screws.

It can be mainly divided into two categories: agent-based plugging materials and powdery plugging materials. At present, the commonly used agent-like plugging material is polyurethane plugging agent, which is mainly made of single-liquid polyurethane and a certain amount of additives, and the principle of plugging the leakage of the product is to quickly solidify after interaction with water, so as to achieve the purpose of plugging the leak.

1.According to the performance, it can be divided into two kinds, one is cement grouting, and the other is chemical grouting, which is more common in acrylic and epoxy resin.

2.According to the physical state, it can be divided into three types, the first is CQ10 and other waterproof coatings, and the second is RQ30

and other waterproofing agents, and the third is waterproofing membranes, such as polyethylene polyester, PCM self-adhesive membranes, etc.

Traditional materials such as polyurethane, acrylate, and epoxy resin are all temporary plugging and cannot achieve the effect of long-term leak plugging. Polyurea grouting, a new type of plugging material, is a very good choice, and it will not leak again for a long time. In particular, the effect of expansion joints, deformation joints, and junction joints is particularly good!

What is the plugging material? Polymer plugging data in the use of more than 20 years, through repeated practice and application, it is a variety of chemical raw materials professional formula manufactured into A, B two liquids, with a specific pneumatic appliance written in the concrete structure cracks, according to the water flow ratio in a few seconds and water crystallization expansion, especially used in the industrial and mining enterprises circle tunnel, basement plugging, civil air defense, caverns, pools, ponds, tunnels, rock foundations, power plant cable trenches, valve shafts, shafts, chemical plant acid, pond and other leakage water flow plugging projects.

The polymer data used in the basement to plug the leakage has outstanding hydrophilic function, the slurry viscosity is low, the soaking function is deep, and it can enter the capillary slit of the concrete structure 107-108, and the water is the same before condensation, and the slurry is dispersed and combined after encountering water, and then gel and consolidate, and the grouting is carried out in the case of wetting or leakage, and it has strong adaptability to water quality, and can be gelatinized in water with a pH value of 3-13: the solid colloid is an elastomer, which can be expanded in case of water, and has the two-layer function of elastic water stop and water stop with water, which is suitable for water conservancy, electric power, Waterproof, anti-seepage and leakage plugging treatment of tunnels, culverts, subways, civil air defense, mines and other construction joints and deformation cracks.

The plugging material is used in any proportion of mixing ratios, which can produce different strengths, different penetration depths, different coagulation times and different expansion multiples. Long-term pants Xunzhou guarantees outstanding water blocking function, acid resistance, bacteria, is not affected by large climatic conditions, and has a certain strength, elasticity and pressure change. In the future, the deformation joint only needs to be deformed and cannot leak.

What is the plugging material? Waterproof plugging materials include grouting plugging materials and plastering plugging materials. Grouting plugging material is to prepare a certain material into a slurry, and use pressure equipment to pour it into the gap or hole to diffuse and gel to achieve the effect of anti-seepage plugging.

The plastering and plugging material is often mixed into the cement with a coagulant with water glass as the main material, so as to promote the rapid hardening of the cement, temporarily block the leakage water, and create conditions for the use of a waterproof layer on it.

The grouting and plugging materials on waterproof engineering are divided into two types: cement grouting materials and chemical grouting materials.

Cement pressure leakage filling material.

1) Definition: Cement pressure grouting leakage filling material is made of cement or water glass and cement as materials, and it is injected into the parts that need to be repaired and plugged by pressure feeding equipment when used.

2) Features: cement pressure grouting leakage filling method has good leakage filling effect, high bonding strength, reinforcing the structure, and simple operation, easy material preparation, low quality. (3) Scope of application:

Cement pressure grouting leakage repair material is suitable for repairing deep, large holes and cracks with greater crack width, construction joints, joint leakage, etc.

In construction projects, water leakage can always be seen, when this situation occurs, it is necessary to find out the leakage point in time, and then according to the actual situation, choose the appropriate waterproof plugging material, so as to truly achieve the purpose of plugging the leakage. So, what are the waterproof plugging materials? What are the tips for choosing a waterproof plugging material?

Let's take a brief look at it together.

1. What are the waterproof plugging materials?

Polyurethane plugging agent, plugging spirit, waterproof slurry, waterproof treasure, polyurethane grouting material, polymer cement, water leakage, modified epoxy material, plugging king, glass glue, super early strength slurry, asphalt waterproof material, mortar waterproofing agent, etc., because there are many types, the waterproof plugging materials used in different situations are also different, and it is recommended to find professionals to deal with them if you don't understand.

Second, what are the skills for choosing waterproof plugging materials?

1. There are many waterproof plugging materials that can be bought on the market, and the owners can choose according to their needs when purchasing, but they must pay attention to the environmental protection of the materials, especially the interior decoration, which is the most basic requirement, otherwise it is easy to harm the human body.

2. According to Qeeka Home experts, when choosing waterproof plugging materials, the pH value should be neutral, so that after construction, the waterproof layer can effectively avoid acid reflux, alkali reflux, corrosion and other situations, such as cement-based waterproof plugging materials.

3. The selection of waterproof plugging materials needs to be determined according to the actual situation of the environment, especially in places with high humidity such as bathrooms and kitchens, and waterproof plugging materials must have waterproof, moisture-proof, seepage-proof and other effects, so as to truly plug leaks.

4. At present, there are many waterproof plugging brands on the market, when choosing, you should choose a good reputation, and then when choosing products, pay attention to check the anti-counterfeiting marks, certificates, quality inspection certificates, and try to choose products certified by the international quality system, and the quality is more guaranteed.

Summary: The above about what are the waterproof plugging materials, as well as the tips for choosing waterproof plugging materials, I hope it will help you. If you want to know more about it first, welcome to pay attention to Qeeka Home.

Polyurethane plugging agent dismantling car, plugging spirit, waterproof slurry, waterproof treasure, polyurethane grouting material, polymer cement, water leakage, modified epoxy material, plugging king, glass glue, super early strength slurry, asphalt waterproof material, mortar waterproofing agent, etc., because there are many types, the waterproof plugging materials used in different situations are also different, and it is recommended to find professionals to deal with them if you don't understand.

Step 1 of waterproof construction, encapsulation waterproofing. It is necessary to do a good job of packaging waterproofing before, which is the first step of the waterproof project, and it is not allowed to be sloppy. When encapsulating the balcony, it is necessary to choose waterproof and moisture-proof materials in the selection of sedan materials.

During the construction process, it is necessary to pay attention to the sealing well. If it is not properly sealed, the waterproof effect will be greatly reduced.

2. Clean the base surface. To do waterproofing in the bathroom, you need to clean the ground and wall first, especially the sand, dust, putty, cement and other materials on the base surface, and at the same time, you also need to level the ground and scrape the concave and convex places on the base surface or fill it well. If you find cracks in the wall, you also need to smooth it with cement mortar to keep the base level flat.

3. The ground is waterproof. The construction practice of balcony floor waterproofing and bathroom floor waterproofing is almost the same, starting from the leveling base surface, followed by coating the waterproof layer, painting waterproof materials, and finally doing ground inspection and laying ground decoration materials. It should be noted here that the waterproof layer of the balcony needs to have a certain height difference with the indoor ground during construction, and it is generally recommended to be 2 3cm lower than the indoor base surface.

When choosing floor materials, you should choose moisture-proof materials, such as marble floor tiles, floor waterproof glue, caulk, plugging king and other products.

4. Yin and yang angle treatment. The yin and yang corners of the bathroom and the floor drain of the water pipe need to be treated to make an arc-shaped waterproof layer to maintain the smoothness of the corners. These areas are the key areas of waterproofing, and they need to be waterproofed 2 or 3 times.

5. The wall is waterproof. Wall waterproofing is an overlooked step. In fact, whether it is the wall of the balcony or the wall of the kitchen and bathroom, if the waterproofing project is not done, it will lead to water ingress on the indoor wall, which will lead to water seepage on the wall and mold on the wall.

Therefore, the waterproofing of the wall also needs to be evenly painted with waterproof paint.

6. Ground drainage. Drainage works need to be done in the kitchen and bathroom and balcony, mainly because these areas have a variety of drainage pipes, and it is necessary to pay attention to reducing the curves of the pipes when laying the pipes, so as not to cause poor drainage.

7. Waterproof test. It is necessary to conduct a closed water test within 24 hours after the completion of the waterproof construction. WaterproofingIn the waterproof area, check whether there is any water leakage and water seepage. If no problem is found, it means that the waterproofing has been successful.